Abstract
The article deals with the study of the rotary table for a metal-cutting machine of a drilling-milling-boring type with a non-clearance worm gear. The efficiency of the clearance compensation mechanism during operation due to the displacement of the worm in the direction parallel to the axis of the worm wheel is substantiated. The investigated phenomena include the arising in the engagement of the worm gear under conditions of reverse table movement. The concept of increasing the efficiency of machining processes due to the constant gapless contact of the worm and the worm wheel is analyzed. The author concludes that the use of sliding bearings will reduce the setup time of the machine equipment and increase the productivity of the manufacturing process for housing parts. Particular attention is paid to the experimental component of the proposed design study for the rotary table. The assumption about the possibility of maintaining the accuracy workpiece characteristics during wear of the contact surfaces for the worm gear elements is justified.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Pronikov AS, Borisov EI, Bushuev VV et al (1995) In: Pronikov AS (ed) Design of metal-cutting machine tools and machine systems: handbook-textbook, vol 2/1, Publishing House of NE Bauman MSTU, Moscow
Avramova TM, Bushuev VV, Gilova LYa et al (2012) In: Bushuev VV (ed) Metal cutting machines, vol 1, Mechanical Engineering, Moscow
Bushuev VV (1992) Basics of designing machines. Stankin, Moscow
Chernavsky SA, Snesarev GA, Kozintsov BS et al (1984) Design of mechanical gears. Mechanical Engineering, Moscow
Chernavsky SA, Itskovich GM, Kiselev VA et al (1976) In: Design of mechanical gears: textbook. Mechanical Engineering, Moscow
Bass D, Riedl R, Slagle N (2016) 4th and 5th Axis rotary table. Mechanical Engineering Department. California Polytechnic State University, San Luis Obispo
Dassanayake M, Tsutsumi M (2009) High perfomance rotary table for machine tool applications. Int J Autom Technol 1:343–347. https://www.researchgate.net/publication/304183144
Jozwik J, Czwarnowski M (2015) Angular positioning accuracy of rotary table and repeatability of five-axis machining center DMU 65 mon-oblock. Adv Sci Technol Res J 9(28):89–95. https://doi.org/10.12913/22998624/60792
Mauro G (1996) Anti-Backlach mechanism for a Rotary stage. US Patent 6,016,716A, 18 Jun 1996
Shevchenko S, Mukhovaty A, Krol O (2016) Geometric aspects of modifications of tapered roller bearings. Procedia Eng 150:1107–1112. https://doi.org/10.1016/j.proeng.2016.07.07.221
Krol O, Sokolov V (2018) Modeling of carrier system dynamics for metal-cutting machines. J IEEE Proc Int Russian Autom Conf (RusAutoCon) 1–5. https://doi.org/10.1109/rusautocon.2018.8501799
Sokolov V (2020) Transfer functions for shearing stress in nonstationary fluid friction. In: Proceedings of the 5th International conference on industrial engineering. ICIE 2019. Lecture notes in mechanical engineering. Springer, Cham, pp 707–715. https://doi.org/10.1007/978-3-030-2241-9_76
Shevchenko SV, Mukhovaty OA, Krol OS (2015) Non-clereance worm gear. Patent of Ukraine 95715, 1, 01 Dec 2015
Sundhararajan M, Gao X-Z, Nejad HV (2018) Based on ANSYS crown tapered rolling bearings dynamic simulation analysis. J Intell Fuzzy Syst 34(2):1121–1131
Andrienko LA, Baykov BA, Ganulich IK et al (2004) Machine parts: Textbook for high schools. In: Ryakhovsky OA (ed) NE Bauman Publishing House of MSTU, Moscow
Pavlenko I, Trojanowska J, Ivanov V, Liaposhchenko O (2019) Scientific and methodological approach for the identification of mathematical models of mechanical systems by using artificial neural networks. In: Innovation engineering and entrepreneurship. HELIX 2018. Lecture notes in electrical engineering, vol 505. Springer, Cham, pp. 299–306. https://doi.org/10.1007/978-3-319-91334-6_41
Golovanev V (2013) KOMPAS-3D from “Shaft” to “Shafts and mechanical transmissions”. J CAD Graph 5:22–23
Ganin NB (2012) Three-dimensional design in KOMPAS-3D. Publishing House of DMK, Moscow
Ganin NB (2011) Design and strength analysis in the KOMPAS-3D. Publishing House of DMK, Moscow
Sokolov V, Krol O, Stepanova O (2018) Automatic control system for electrohydraulic drive of production equipment. In: 2018 International Russian automation conference. IEEE. 10.1109/RUSAUTOCON.2018.8501609
Sokolov V (2019) Diffusion of circular source in the channels of ventilation systems. In: Advances in engineering research and application. ICERA 2018, Lecture notes in networks and systems, vol 63. Springer, Cham, pp 278–283. https://doi.org/10.1007/978-3-030-04792-4_37
Reshetov DN (1989) Details of machines. Mechanical Engineering, Moscow
Reshetov DN, Gusenkov AP, Drozdov YN (1995) In: Reshetov DN (ed) Mechanical engineering encyclopedia, Machine parts structural strength friction wear lubrication. Mechanical Engineering, vol IV-1. Moscow
Zamriy AA (2007) Practical training course CAD/CAE APM winmachine. teaching aid. Publishing House of APM, Moscow
Sokolov V, Krol O, Stepanova O (2019) Nonlinear simulation of electrohydraulic drive for technological equipment. J Phys: Conf Ser 1278:012003. https://doi.org/10.1088/1742-6596/1278/1/012003
Shelofast VV, Chugunova TB (2004) Fundamentals of machine design. examples of solving problems. Publishing House of APM, Moscow
Magomedov A, Alekhin A (2010) Integrated finite element analysis in KOMPAS-3D. J CAD/CAM/CAE Observer 8(60):1–5
Fomin EP (2007) Using the parametric capabilities of KOMPAS-3D. J CAD Graph 10:70–74
Sokolov V, Rasskazova Y (2016) Automation of control processes of technological equipment with rotary hydraulic drive. Eastern-Eur J Enterp Technol 80:44–50. https://doi.org/10.15587/1729-4061.2016.63711
Krol O, Sokolov V (2019) Parametric modeling of gear cutting tools. In: Advances in manufacturing II, Lecture notes in mechanical engineering vol 4. Springer, Cham, pp 3–11. https://doi.org/10.1007/978-3-030-16943-5_1
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Krol, O. (2021). Modeling of Worm Gear Design with Non-clearance Engagement. In: Radionov, A.A., Gasiyarov, V.R. (eds) Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020). ICIE 2021. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-54814-8_5
Download citation
DOI: https://doi.org/10.1007/978-3-030-54814-8_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-54813-1
Online ISBN: 978-3-030-54814-8
eBook Packages: EngineeringEngineering (R0)