Abstract
Selective laser melting is one of the most popular AMs, which enable manufacturing components from the metallic powder. The aim of this work was to define the influence of the process parameters on the surface topography and physicochemical and mechanical properties of pure titanium CP Ti, obtained by SLM. The work presents results of SEM/EDS analysis, density, microhardness and contact angle measurements and surface free energy calculation as well as potentiodynamic tests. Based on the investigation, it can be inferred that selection of the appropriate process parameters has a significant effect on the properties of material.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Augustyn-Pieniążek, J., Kurtyka, P., Stopka, S.: Abrasive behaviour of Co-Cr alloys in the ceramic material-artificial saliva suspension. Eng. Biomat. 18(127), 22–32 (2014)
Attar, H., Calin, M., Zhang, L.C., Scudino, S., Eckert, J.: Manufacture by selective laser melting and mechanical behavior of commcercially puer titanium. Mater. Sci. Engine: C. 593, 170–177 (2014)
Gibson, I., Rosen, D.W., Strucker, B.: Powder Bed Fusion Processes, vol. 78, pp. 120–159. Springer, Boston (1982)
Gu, D., Hadedorn, YC., Meiner, W., Meng, G., Batista, R.J.S., Eissenbach, K., Poprawe, R.: Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium Atca Mater. 60, 3849–3860 (2012)
Li, R., Shi, Y., Wang, Z., Wang, L., Liu, J., Jiang, W.: Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting. Appl. Surf. Sci. 256, 4350–4356 (210)
Liverani, E., Toschi, S., Ceschini, L., Fortunato, A.: Effect of selective laser melting (SLM) process parameters on mictrostructure and mechanical properties of 316L austenitic stainless steel. J. Master. Process. Technol 249, 255–263 (2017)
Wysocki, B., Maj, P., Krawczyńska, A., Rożniatowski, K., Zdunek, J., Kurzydłowski, K.J., Święszkowski, W.: Microstructure and emchanical properties investigation of CP titanium processed by selective laser melting (SLM). J. Master. Process. Technol. 214, 12–23 (2017)
Ziółkowski, G., Chlebus, E., Szymczyk, P., Kurzac, J.: Application of X-ray Ct method for discontinuity and porosty detection in 316L stainless steel part produced with SLM techlonogy. Arch. Civ. Mech. Eng. 14(4), 608–614 (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Woźniak, A., Adamiak, M., Ziębowicz, B. (2021). The Surface Topography and Physicochemical and Mechanical Properties of Pure Titanium (CP Ti) Manufactured by Selective Laser Melting (SLM). In: Gzik, M., Paszenda, Z., Pietka, E., Tkacz, E., Milewski, K. (eds) Innovations in Biomedical Engineering. AAB 2020. Advances in Intelligent Systems and Computing, vol 1223. Springer, Cham. https://doi.org/10.1007/978-3-030-52180-6_25
Download citation
DOI: https://doi.org/10.1007/978-3-030-52180-6_25
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-52179-0
Online ISBN: 978-3-030-52180-6
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)