Abstract
Machining plays a basic role in most procedures of the conversion of timber. Machining usually alters the shape, size and surface quality of wood. Machining occurs by cutting in most cases, and chips are the by-product. Some chips are used for the production of chipboard and some are used to generate energy. The chip may be the product in certain cases, and then we talk about technological or target chips. Chips are deliberately produced for the production of plywood, chipboard and wood-wool for packing.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Literature
Bölöni, I.: Some functional regularities of the comminution process in hammer mill. Acta. Tech. Acad. Sci. Hung. 41, 381–398 (1962)
Bölöni, I.: Some regularities of grain distribution and fineness variation as observed in hammer mill products. Acta. Tech. Acad. Sci. Hung. 45, 45–64 (1964a)
Bölöni, I.: The required power input of hammer mills. Acta. Tech. Acad. Sci. Hung. 45, 327–344 (1964b)
Hamilton, G., Goodman, L.: The stress field created by a circular sliding contact. J. Appl. Mech. 33, 371–376 (1966)
Henderson, S., Bölöni, I.: Closed-circuit grinding of agricultural products. J. Agric. Eng. Res. 11, 248–254 (1966)
Kirbach, E.: Saw performance critical to lumber quality, yield. Wood Technol. 39, 22–24 (1995)
Rittinger, P.: Lehrbuch der Aufbereitungskunde. Springer, Berlin (1867)
Sitkei, G.: Fortschritte in der Theorie des Spanens von Holz. Holztechnologie, No. 2, pp. 67–70 (1983)
Sitkei, G.: Mechanics of Agricultural Materials. Elsevier, Amsterdam (1986)
Sitkei, G.: On the mechanics of oblique cutting of wood. In: Proceedings of 13th IWMS Vancouver, pp. 469–476 (1997)
Sitkei, G., et al.: Theorie des Spanens von Holz. Fortschrittbericht No.1. Acta Fac. Ligniensis Sopron (1990)
Sugihara, H., et al.: Wood cutting with a pendulum dynamometer (VI). Wood Research No. 39, Kyoto, pp. 1–12 (1966)
Timoshenko, S., Goodier, J.: Theory of Elasticity. McGraw-Hill, New York (1951)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2020 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Csanády, E., Magoss, E. (2020). Mechanics of the Cutting Process. In: Mechanics of Wood Machining. Springer, Cham. https://doi.org/10.1007/978-3-030-51481-5_1
Download citation
DOI: https://doi.org/10.1007/978-3-030-51481-5_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-51480-8
Online ISBN: 978-3-030-51481-5
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)