Abstract
Open circular holes are an essential design feature and are often placed in narrowplates for reasons of limited space raising high stress concentrations. To create lightweight optimal structures precise analysis tools are vital, which can be based on analytical means providing efficient computation. That is why focus of the present paper is the determination of the stress field for the isotropic finite-width open-hole problem under uniform tension using the Airy stress function. This is performed by taking the stress field of corresponding infinite domain problem and supplementing it with auxiliary functions enabling to continuously model traction-free edges. The results are eventually validated against Finite Element analyses.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Becker W (1993) Complex method for the elliptical hole in an unsymmetric laminate. Archive of Applied Mechanics 63:159–169
Camanho P, Lambert M (2006) A design methodology for mechanically fastened joints in laminated composite materials. Composites Science and Technology 66:3004–3020, https://doi.org/10.1016/j.compscitech.2006.02.017
Camanho P, Ercin G, Catalanotti G, Mahdi S, Linde P (2012) A finite fracture mechanics model for the prediction of the open-hole strength of composite laminates. Composites Part A: Applied Science and Manufacturing 43(8):1219 – 1225, DOI https://doi.org/10.1016/j.compositesa.2012.03.004
Catalanotti G, Camanho P (2013) A semi-analytical method to predict net-tension failure of mechanically fastened joints in composite laminates. Composites Science and Technology 76:69–76, https://doi.org/10.1016/j.compscitech.2012.12.009
Cornetti P, Pugno N, Carpinteri A, Taylor D (2006) Finite fracture mechanics: A coupled stress and energy failure criterion. Engineering Fracture Mechanics 73(14):2021 – 2033
Filon LNG (1903) On an approximate solution for the bending of a beam of rectangular cross-section under any system of lond, with special reference to points of concentrated or discontinuous loading. Philosophical Transactions of the Royal Society of London, Series A 201:63–155, https://doi.org/10.1098/rsta.1903.0014
HufenbachW, KrollL(1999) Stress analysis of notched anisotropic finite plates under mechanical and hygrothermal loads. Archive of Applied Mechanics 69(3):145– 159
Hufenbach W, Grüber B, Gottwald R, Lepper M, Zhou B (2010) Analytical and experimental analysis of stress concentration in notched multilayered composites with finite outer boundaries. Mechanics of Composite Materials 46(5):531–538
Hufenbach W, Grüber B, Lepper M, G R, Zhou B (2013) An analytical method for the determination of stress and strain concentrations in textile-reinforced gf/Tension 329 composites with elliptical cutout and a finite outer boundary and its numerical verification. Archive of Applied Mechanics 83:125–135
Kirsch G (1898) Die Theorie der Elastizität und die Bedürfnisse der Festigkeitslehre. Zeitschrift des Vereins deutscher Ingenieure 42:797–807
Leguillon D (2002) Strength or toughness? A criterion for crack onset at a notch. European Journal of Mechanics - A/Solids 21(1):61 – 72
Lekhnitskii S (1968) Anisotropic plates. Gordon and Breach Science Publishers
Lin CC, Ko CC (1988) Stress and strength analysis of finite composite laminates with elliptical holes. Journal of Composite Materials 22(4):373–385
Michell JH (1899) On the direct determination of stress in an elastic solid with application to the theory of plates. Proceedings of the London Mathematical Society 31:100–124
Muskhelishvili N (1963) Some basic problems of the mathematical theory of elasticity. Noordhoff, Groningen 17404
Neuber H (1933) Elastisch-strenge Lösungen zur Kerbwirkung bei Scheiben und Umdrehungskörpern. ZAMM 13:439–442
Neuber H (1934) Zur Theorie der Kerbwirkung bei Biegung und Schub. Ingenieur- Archiv 5(3):238–244
Neuber H (2013) Kerbspannungslehre: Theorie der Spannungskonzentration. Genaue Berechnung der Festigkeit. Springer-Verlag
Nguyen-Hoang M, Becker W (2020) Tension failure analysis for bolted joints using a closed-form stress solution. Composite Structures p 111931
Ogonowski J (1980) Analytical study of finite geometry plates with stress concentrations. In: 21st Structures, Structural Dynamics, and Materials Conference, p 778
Peterson R, Wahl A (1936) Two and three dimensional cases of stress concentration and comparison with fatigue tests. Trans ASME 58:A15
Pilkey WD, Pilkey DF (2008) Peterson’s stress concentration factors. John Wiley & Sons
Rosendahl P, Weißgraeber P, Stein N, Becker W (2017) Asymmetric crack onset at open-holes under tensile and in-plane bending loading. International Journal of Solids and Structures 113-114:10 – 23
Sadd MH (2005) Elasticity: Theory, Applications, and Numerics - Second Edition. Elsevier Butterworth-Heinemann
Savin G (1961) Stress Concentration Around Holes. Pergamon Press
Sevenois R, Koussios S (2014) Analytic methods for stress analysis of twodimensional flat anisotropic plates with notches: An overview. Applied Mechanics Reviews 66:060,802
Tan SC (1988) Finite-width correction factors for anisotropic plate containing a central opening. Journal of Composite Materials 22(11):1080–1097
Tan SC, Kim RY (1990) Strain and stress concentrations in composite laminates containing a hole. Experimental Mechanics 30(4):345–351
Timoshenko S, Goodier JN (1951) Theory of Elasticity. McGraw-Hill Book Company, Inc
Ukadgaonker V, Rao D (2000a) A general solution for stress resultants and moments around holes in unsymmetric laminates. Composite Structures 49(1):27 – 39
Ukadgaonker V, Rao D (2000b) A general solution for stresses around holes in symmetric laminates under inplane loading. Composite Structures 49(3):339 – 354
Weißgraeber P, Leguillon D, BeckerW(2015) A review of finite fracture mechanics: Crack initiation at singular and non-singular stress-raisers. Archive of Applied Mechanics 86:375–401
Whitney JM, Nuismer RJ (1974) Stress fracture criteria for laminated composites containing stress concentrations. Journal of Composite Materials 8:253–265, https://doi.org/10.1177/002199837400800303
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Minh, NH., Becker, W. (2020). Open Circular Hole in a Finite Plate Under Tension Treated by Airy Stress Function Method. In: Altenbach, H., Chinchaladze, N., Kienzler, R., Müller, W. (eds) Analysis of Shells, Plates, and Beams. Advanced Structured Materials, vol 134. Springer, Cham. https://doi.org/10.1007/978-3-030-47491-1_16
Download citation
DOI: https://doi.org/10.1007/978-3-030-47491-1_16
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-47490-4
Online ISBN: 978-3-030-47491-1
eBook Packages: EngineeringEngineering (R0)