Abstract
Since vibration data can be recorded with the same field equipment used to collect seismic data and several national and international building codes require the identification of the eigenmodes of the existing structures, we decided to include a chapter aimed at introducing the Earth scientist/professional to vibration analysis. The chapter cannot be a comprehensive guide to vibration analysis but intends to shown that the vibration monitoring at a construction site and the characterization of the eigenmodes of a building or structure can be relatively simple. A new technique (GHM—Gaussian-filtered Horizontal Motion) that relies on the data collected by a single 3C geophone and can discriminate flexural and torsional modes is presented through three case studies.
A mistake is always forgivable, rarely excusable and always unacceptable.
Robert Fripp
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Arakawa T, Yamamoto K (2004) Frequencies and damping ratios of a high rise building based on microtremor measurement. In: Proceedings of the 13th world conference on earthquake engineering, Vancouver, BC, Canada, 1–6 Aug 2004. Paper no 48
Athanasopoulos GA, Pelekis PC (2000) Ground vibrations from sheet pile driving in urban environment: measurements, analysis and effects on buildings and occupants. Soil Dyn Earthq Eng 19:371–387
Bonev Z, Vaseva E, Blagov D, Mladenov K (2010) Seismic design of slender structures including rotational components of the ground acceleration. In: Eurocode 8 approach. Proceedings of 14th European conference on earthquake engineering, Ohrid, Macedonia, vol 9, pp 6706–6713
Brownjohn JMW (2003) Ambient vibration studies for system identification of tall buildings. Earthq Eng Struct Dyn 32:71–95
Cagnetti V, Pasquale V (1979) The earthquake sequence in Friuli, Italy, 1976. Bull Seismol Soc Am 69:1797–1818
Ceravolo R, Matta E, Quattrone A, Zanotti L, Fragonara L (2017) Amplitude dependence of equivalent modal parameters in monitored buildings during earthquake swarms. Earthq Eng Struct Dyn 46:2399–2417
Charney FA (2010) Seismic loads: guide to the seismic load. Provisions of ASCE 7-05. American Society of Civil Engineers Press, Reston, p 231
Chopra AK (1995) Dynamics of structures: theory and applications to earthquake engineering. Prentice Hall, Upper Saddle River, NJ, 944 pp
Dal Moro G, Weber T, Keller L (2018) Gaussian-filtered Horizontal Motion (GHM) plots of non-synchronous ambient microtremors for the identification of flexural and torsional modes of a building. Soil Dyn Earthq Eng 112:243–245
Deckner F (2013) Ground vibrations due to pile and sheet pile driving—influencing factors, predictions and measurements. Licentiate thesis, Division of Soil and Rock Mechanics, Department of Civil and Architectural Engineering, School of Architecture and the Built Environment. KTH, Royal Institute of Technology, Stockholm, p 126
de Silva CW (2005) Vibration and shock handbook. CRC Press, Taylor & Francis Group, Boca Raton, p 1771
Garevski M (ed) (2012) Earthquakes and health monitoring of civil structures. Springer, Netherlands, 331 pp. ISBN 978-94-007-5182-8
Ghosh SK (2003) Seismic and wind design of concrete buildings. Kaplan Publishing, New York, 542 pp
Gupta AK (1990) Response spectrum method in seismic analysis and design of structures. Blackwell Scientific Publications, Cambridge, 170 pp
Hong LL, Hwang WL (2000) Empirical formula for fundamental vibration periods of reinforced concrete buildings in Taiwan. Earthq Eng Struct Dyn 29:327–337
Jongmans D (1996) Prediction of ground vibrations caused by pile driving: a new methodology. Eng Geol 42(1):25–36
Kim DS, Lee JS (2000) Propagation and attenuation characteristics of various ground vibrations. Soil Dyn Earthq Eng 19(2):115–126. https://doi.org/10.1016/S0267-7261(00)00002-6
Kouroussis G, Conti C, Verlinden O (2014) Building vibrations induced by human activities: a benchmark of existing standards. Mech Ind 15:345–353
Massarsch KR, Fellenius BH (2008) Ground vibrations induced by impact pile driving. In: 6th international conference on case histories in geotechnical engineering, Arlington, VA, 11–16 Aug
Michel C, Guéguen P, El Arem S, Mazars J, Kotronis P (2010) Full scale dynamic response of a RC building under weak seismic motions using earthquake recordings, ambient vibrations and modelling. Earthq Eng Struct Dyn 39:419–441
Michel C, Zapico B, Lestuzzi P, Molina FJ, Weber F (2011) Quantification of fundamental frequency drop for unreinforced masonry buildings from dynamic tests. Earthq Eng Struct Dyn 40:1283–1296
Naito Y, Ishibashi T (1996) Identification of structural systems from microtremors and accuracy factors. In: Eleventh world conference on earthquake engineering, Acapulco, Mexico. Paper no 770
Sato H, Fehler MC (2009) Seismic wave propagation and scattering in the heterogeneous earth. Springer, Berlin, Heidelberg. ISBN: 978-3-540-89622-7
Su RKL, Chandler AM, Sheikh MN, Lam NTK (2005) Influence of non-structural components on lateral stiffness of tall buildings. J Struct Des Tall Spec Build 14(2):143–164
Takada T, Iwasaki R, An DD, Itoi T, Nishikawa N (2004) Dynamic behavior change of buildings before and after seismically retrofitting. In: Proceedings of the 13th world conference on earthquake engineering, Vancouver, BC, Canada, 1–6 Aug 2004
Trifunac MD (2009) The role of strong motion rotations in the response of structures near earthquake faults. Soil Dyn Earthq Eng 29:382–393
Zembaty Z (2009) Rotational seismic load definition in Eurocode 8, part 6, for slender tower-shaped structures. Bull Seismol Soc Am 2009(99):1483–1485
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Dal Moro, G. (2020). Introduction to Vibration Monitoring and Building Characterization via GHM. In: Efficient Joint Analysis of Surface Waves and Introduction to Vibration Analysis: Beyond the Clichés . Springer, Cham. https://doi.org/10.1007/978-3-030-46303-8_5
Download citation
DOI: https://doi.org/10.1007/978-3-030-46303-8_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-46302-1
Online ISBN: 978-3-030-46303-8
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)