Abstract
Performance verification of 3D optical based scanners is currently a topic of great discussion, since they are ever more used in the industrial manufacturing field for the dimensional verification of components. Among their advantages, there is the capability of acquire large amounts of points in a very short time, regardless the geometrical complexity of the object under measurement. Although, traceability is still critical and the uncertainty assessment conducted using artefacts calibrated through the more traceable Coordinate Measuring Machines (CMMs), is still the most implemented method. In this paper, some of the most interesting geometries used for the performance verification of optical based scanners have been reported, considering the most widespread measuring tasks which require the use of these instruments, both prismatic geometries and freeform shapes.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Galantucci, L.M., Guerra, M.G., Lavecchia, F., Dassisti, M.: Additive manufacturing: new trends in the 4th industrial revolution. In: Lecture Notes in Mechanical Engineering, pp. 153–159 (2019). https://doi.org/10.1007/978-3-030-18180-2_12
Guerra, M.G., Gregersen, S.S., Frisvad, J.R., De Chiffre, L., Lavecchia, F., Galantucci, L.M.: Measurement of polymers with 3D optical scanners: evaluation of the subsurface scattering effect through five miniature step gauges. Meas. Sci. Technol. 31, 015010 (2020). https://doi.org/10.1088/1361-6501/ab3edb
Beraldin, J.A., Mackinnon, D., Cournoyer, L.: Metrological characterization of 3D imaging systems: progress report on standards developments. In: International Congress of Metrology, vol. 3, pp. 1–21 (2015). https://doi.org/10.1051/metrology/20150013003
ISO 10360-7:2011: Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 7: CMMs equipped with imaging probing systems (2011)
ISO 10360-8:2013: Geometrical product specifications (GPS) – Acceptance and reverification tests for coordinate measuring systems (CMS) – Part 8: CMMs with optical distance sensors (2013)
VDI-Standard: VDI/VDE 2634 Blatt 2: Optical 3-D measuring systems - Optical systems based on area scanning (2012)
VDI-Standard: VDI/VDE 2634 Blatt 3: Optical 3D-measuring systems - Multiple view systems based on area scanning (2008)
ISO/IEC Guide 98-3: Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) (2008)
ISO 14253-2:2011: Geometrical product specifications (GPS) – Inspection by measurement of workpieces and measuring equipment – Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (2011)
ISO 15530-3:2011 Geometrical product specifications (GPS) – Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement – Part 3: Use of calibrated workpieces or measurement standards (2011)
Müller, P., Hiller, J., Dai, Y., Andreasen, J.L., Hansen, H.N., De Chiffre, L.: Estimation of measurement uncertainties in X-ray computed tomography metrology using the substitution method. CIRP J. Manuf. Sci. Technol. 7, 222–232 (2014). https://doi.org/10.1016/j.cirpj.2014.04.002
Sims-Waterhouse, D., Piano, S., Leach, R.: Verification of micro-scale photogrammetry for smooth three-dimensional object measurement. Meas. Sci. Technol. 28, 055010 (2017). https://doi.org/10.1088/1361-6501/aa6364
De Chiffre, L., Hansen, H.N., Andreasen, J.L., Savio, E., Carmignato, S.: Geometrical Metrology and Machine Testing. Textbook. Polyteknisk Forlag (2015)
González-Jorge, H.: Verification artifact for photogrammetric measurement systems. Opt. Eng. 50, 073603 (2011). https://doi.org/10.1117/1.3598868
Robson, S., Beraldin, J.-A., Brownhill, A., MacDonald, L.: Artefacts for optical surface measurement. In: Videometrics, Range Imaging, and Applications XI, vol. 8085, p. 80850C (2011). https://doi.org/10.1117/12.882702
Acko, B., McCarthy, M., Haertig, F., Buchmeister, B.: Standards for testing freeform measurement capability of optical and tactile coordinate measuring machines. Meas. Sci. Technol. 23 (2012). https://doi.org/10.1088/0957-0233/23/9/094013
Dury, M.R., Woodward, S.D., Brown, S.B., McCarthy, M.B.: Surface finish and 3D optical scanner measurement performance for precision engineering. In: Proceedings of ASPE 2015 Annual Meeting, pp. 419–423 (2015)
Barnfather, J.D., Goodfellow, M.J., Abram, T.: Photogrammetric measurement process capability for metrology assisted robotic machining. Meas. J. Int. Meas. Confed. 78, 29–41 (2016). https://doi.org/10.1016/j.measurement.2015.09.045
Guerra, M.G., Lavecchia, F., Maggipinto, G., Galantucci, L.M., Longo, G.A.: Measuring techniques suitable for verification and repairing of industrial components: a comparison among optical systems. CIRP J. Manuf. Sci. Technol. 27, 114–123 (2019). https://doi.org/10.1016/j.cirpj.2019.09.003
Iuliano, L., Minetola, P., Salmi, A.: Proposal of an innovative benchmark for comparison of the performance of contactless digitizers. Meas. Sci. Technol. 21 (2010). https://doi.org/10.1088/0957-0233/21/10/105102
Cantatore, A., Angel, J., De Chiffre, L.: Material investigation for manufacturing of reference step gauges for CT scanning verification. In: 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN, pp. 129–132 (2012)
Cantatore, A., De Chiffre, L., Carmignato, S.: Investigation on a replica step gauge for optical 3D scanning of micro parts. In: 10th International Conference of the European Society for Precision Engineering and Nanotechnology (2010)
Stolfi, A., De Chiffre, L.: CT crown for on-machine scale calibration in Computed Tomography. In: Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN (2016)
Stolfi, A., De Chiffre, L.: 3D artefact for concurrent scale calibration in Computed Tomography. CIRP Ann. Manuf. Technol. 65, 499–502 (2016). https://doi.org/10.1016/j.cirp.2016.04.069
Angel, J., De Chiffre, L., Kruth, J.P., Tan, Y., Dewulf, W.: Performance evaluation of CT measurements made on step gauges using statistical methodologies. CIRP J. Manuf. Sci. Technol. 11, 68–72 (2015). https://doi.org/10.1016/j.cirpj.2015.08.002
De Chiffre, L., Carmignato, S., Cantatore, A., Jensen, J.D.: Replica calibration artefacts for optical 3D scanning of micro parts. In: Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN, pp. 352–355 (2009)
Guerra, M.G., De Chiffre, L., Lavecchia, F., Galantucci, L.M.: Use of miniature step gauges to assess the performance of 3D optical scanners and to evaluate the accuracy of a novel additive manufacture process. Sensors 20 (2020). https://doi.org/10.3390/s20030738
Wilm, J., Madruga, D.G., Jensen, J.N., Gregersen, S.S., Brix, M.E., Guerra, M.G., Aanæs, H., De Chiffre, L.: Effects of subsurface scattering on the accuracy of optical 3D measurements using miniature polymer step gauges. In: Proceedings euspen’s 18th International Conference & Exhibition, Venice, IT, pp. 449–450 (2018)
Van Gestel, N., Cuypers, S., Bleys, P., Kruth, J.P.: A performance evaluation test for laser line scanners on CMMs. Opt. Lasers Eng. 47, 336–342 (2009). https://doi.org/10.1016/j.optlaseng.2008.06.001
Galantucci, L.M., Pesce, M., Lavecchia, F.: A powerful scanning methodology for 3D measurements of small parts with complex surfaces and sub millimeter-sized features, based on close range photogrammetry. Precis. Eng. (2015). https://doi.org/10.1016/j.precisioneng.2015.07.010
Lavecchia, F., Guerra, M.G., Galantucci, L.M.: Performance verification of a photogrammetric scanning system for micro-parts using a three-dimensional artefact: adjustment and calibration. Int. J. Adv. Manuf. Technol. 96, 4267–4279 (2018)
De Chiffre, L., Carli, L., Eriksen, R.S.: Multiple height calibration artefact for 3D microscopy. CIRP Ann. Manuf. Technol. 60, 535–538 (2011). https://doi.org/10.1016/j.cirp.2011.03.054
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Guerra, M.G., Lavecchia, F., Galantucci, L.M. (2020). Artefacts Used for Testing 3D Optical-Based Scanners. In: Wang, L., Majstorovic, V., Mourtzis, D., Carpanzano, E., Moroni, G., Galantucci, L. (eds) Proceedings of 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-46212-3_12
Download citation
DOI: https://doi.org/10.1007/978-3-030-46212-3_12
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-46211-6
Online ISBN: 978-3-030-46212-3
eBook Packages: EngineeringEngineering (R0)