Abstract
The new attention to masonry structures puts into evidence their continuous potential to be innovative architectural and engineering solutions. In the present paper, the form finding process for a pierced vault is realized. The geometry solutions were analyzed by global stability analysis. In addition, a 3D printing with FDM procedure realized the formworks for building a physical model adopted in the laboratory experiments. Finally, 3D-DIC was performed to recognize the structural behavior during the loading process on the model. DIC measurements were found in good agreement with the numerical results.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Richardson, J.N., Adriaenssens, S., Coelho, R.F., Bouillard, P.: Coupled form finding and grid optimization approach for single layer grid shells. Eng. Struct. 52, 230–239 (2013)
Manuello, A., Bazzucchi, F., Carpinteri, A.: Step-by-step stability analysis of shallow grid shells: buckling versus snap-through. In: IASS 2016 Tokyo Symposium: Spatial Structures in the 21st Century, Tokyo, 26–30 September 2016
Bazzucchi, F., Manuello, A., Carpinteri, A.: Instability load evaluation of shallow imperfection-sensitive structures by form and interaction parameters. Eur. J. Mech. A. Solids 66, 201–211 (2017)
Bazzucchi, F., Manuello, A., Carpinteri, A.: Interaction between snap-through and Eulerian instability in shallow structures. Int. J. Non-linear Mech. 88
Post, D.: Moiré Interferometry at VPI and SU. Exp. Mech. 23(2), 203–210 (1983)
Fottenburg, W.G.: Some applications of holographic interferometry. Exp. Mech. 8, 281–285 (1969)
Wang, Y.Y., Chen, D.J., Chiang, F.P.: Material testing by computer aided speckle interferometry. Exp. Tech. 17(5), 30–32 (1993)
Bastawros, A.F., Voloshin, A.S.: Thermal strain measurements in electronic packages through fractional Fringe Moiré interferometry. J. Electron. Packag. 112(4), 303–308 (1990)
Bruck, H.A., McNeil, S.R., Sutton, M.A., Peters, W.H.: Digital image correlation using Newton-Raphson method of partial differential correction. Exp. Mech. 29(3), 261–267 (1989)
Zhang, D., Zhang, X., Cheng, G.: Compression strain measurement by digital speckle correlation. Exp. Mech. 39(1), 62–65 (1999)
Sutton, M.A., Wolters, W.J., Peters, W.H., Ranson, W.F., McNeil, S.R.: Determination of displacements using an improved digital correlation method. Image Vis. Comput. 1(3), 133–139 (1983)
Sutton, M.A., Cheng, M.Q., Peters, W.H., Chao, Y.J., McNeill, S.R.: Application of an optimized digital correlation method to planar deformation analysis. Image Vis. Comput. 4(3), 143–151 (1986)
Sutton, M.A., Turner, J.L., Bruck, H.A., Chae, T.A.: Full-field representation of discretely sampled surface deformation for displacement and strain analysis. Exp. Mech. 31(2), 168–177 (1991)
Sutton, M.A., McNeill, S.R., Jang, J., Babai, M.: Effects of subpixel image restoration on digital correlation error. J. Opt. Eng. 27(10), 870–877 (1988)
Spagnolo, G., Schirripa Paoletti, D., Ambrosini, D., Guattari, G.: Electro-optic correlation for in situ diagnostics in mural frescoes. Pure Appl. Opt.: J. Eur. Opt. Soc. Part A 6(5), 557–563 (1997)
Rippmann, M., Lachauer, L., Block, P.: RhinoVAULT - interactive vault design. Int. J. Space Struct. 27(4), 219–230 (2012)
Carpinteri, A.: Advanced Structural Mechanics. Taylor & Francis Ltd., Abingdon (2017)
Misic, T., Najdanovic-Lukic, M., Nesic, L.: Dimensional analysis in physics and the Buckingham theorem. Eur. J. Phys. 31, 893–906 (2010)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Manuello Bertetto, A., Carpinteri, A. (2020). Stability Evaluation by Digital Image Correlation of a Masonry Vault Prototype Under Loading. In: Carcaterra, A., Paolone, A., Graziani, G. (eds) Proceedings of XXIV AIMETA Conference 2019. AIMETA 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-41057-5_78
Download citation
DOI: https://doi.org/10.1007/978-3-030-41057-5_78
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-41056-8
Online ISBN: 978-3-030-41057-5
eBook Packages: EngineeringEngineering (R0)