Abstract
This work concerns the rate independent behavior for metals at large strain. It develops a theoretical study on forming limit diagram, using the two three-dimensional approach proposed by Rice and Cordobois Ladvez. In this context the critical strain are analysed in the phenomenological models framework. The model is presented:
-
The isotropic case, with Von Mises isotropic yield function, for which the comparison of instability criteria is presented in terms of the hardening parameters. It was showed that the predicted forming limit diagram was strongly influenced by the type of hardening law and the instability criteria.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Bouchaâla, K., Ghanameh, M.F., Faqir, M., Chouiyakh, H., Mada, M., Essadiqi, E.: Wrinkling defect prediction and formability improvement in cylindrical deep drawing of Al-Li alloy using FEM. In: 14th Congress of Mechanics, Morocco (2019)
Cordebois, J.P., Ladeveze, P.: Critère de striction des tôles anisotropes embouties. Rapport GRECO N° 26/1981 (1981)
Abed-Meraim, F., Balan, T., Altmeyer, G.: Investigation and comparative analysis of plastic instability criteria: application to forming limit diagrams. Int. J. Adv. Manuf. Technol. 71, 1247–1262 (2014)
Mohamed, H.: Instabilité plastique détermination théorique des courbes limites de formages - Mémoire DE D.E.A, Lyon (1990)
Gatea, S., Xu, D., Ou, H., McCartney, G.: Evaluation of formability and fracture of pure titanium in incremental sheet forming. Le journal international des technologies de fabrication de pointe 95(1–4), 625–641 (2018)
Cordebois, J.P.: critère d’instabilité plastique et endommagement ductile en grandes déformations. Thèse d’état université paris 6 (1983)
Cordebois, J.P., Ladeveze, P.: Critère de striction des tôles anisotropes embouties. Rapport GRECO N° 26/1981 ‘‘Détermination et études des courbes limites de formages des tôles mince’’. Journées d’automne société Française de métallurgie, Paris, octobre 1982
Jalinier, J.M.: Mise en forme et endommagement. Thèse d’état, université de Metz (1981)
Rice, J.R.: The localization of plastic deformation. In: Koiter, W.T. (ed.) Theoretical and Applied Mechanics, p. 207. North Holland, Amsterdam (1976)
Swift, H.W.: Localized necking in thin sheets. J. Mech. Phys. Solids 23, 421–441 (1975)
Goodwin, G.M.: Application of the strain analysis to steel metal forming in press shop, la métallurgia Italiana, N° 8, pp. 767–772 (1968)
Keeler, S.P.: Determination of the forming limits in automotive stamping. Sheet Metal Ind. 42, 683–703 (1965)
Zhani, K., Chenaoui, A.: Contribution à de l’étude de l’instabilité élastoplastique en grandes déformations. Rapport de DESA en 2004
Zhani, K.: Contribution à l’étude de l’instabilité de déformation Plastique dans les cristaux cubiques a faces centrées. Thèse, l’Ecole Nationale Supérieure des Mines de Saint-Etienne (2009)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Saadi, N., Zhani, K., Fethallah, K., Chenaoui, A., Dkiouak, R. (2020). Curve Limit of Formation for the Isotropic Plasticity. In: Ezziyyani, M. (eds) Advanced Intelligent Systems for Sustainable Development (AI2SD’2019). AI2SD 2019. Advances in Intelligent Systems and Computing, vol 1104. Springer, Cham. https://doi.org/10.1007/978-3-030-36671-1_17
Download citation
DOI: https://doi.org/10.1007/978-3-030-36671-1_17
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-36670-4
Online ISBN: 978-3-030-36671-1
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)