Abstract
Dynamic response and failure of composites of naval relevance is important to assess the safety of warships. While the damage and residual properties of composite materials under low velocity impact has been widely investigated, ballistic performance of composites of naval relevance has not yet been fully understood. This chapter shows recent developments of high-speed impact performance of composites, including both analytical and numerical models as well as experimental data of ballistic response of carbon, glass and hybrid carbon/glass fiber reinforced vinylester composites at different temperatures and environmental conditions. Results include residual velocity against impact velocity as well as ballistic limit for all materials investigated. A good agreement is observed between experimental and analytical results.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abrate S (1998) Impact on composite structures. Cambridge University Press, Cambridge
Proceedings of Dynamic Response and Failure of Composite Materials and Structures, Ischia 1, 2014 and 2016
Gómez del Río T et al (2005) Damage in CFRPs due to low velocity impact at low temperature. Compos Part B 31(1):41–50
García-González D et al (2015) Low temperature effect on impact energy absorption capability of PEEK composites. Compos Struct 134:440–449
Zhou G (1995) Damage mechanisms in composite laminates impacted by a flat-ended impactor. Compos Sci Technol 54:267–273
Ibekwe SI, Mensah PF, Li G, Pang SS (2007) Impact and post impact response of laminated beams at low temperatures. Compos Struct 79:12–17
Hawyes VJ, Curtis PT, Soutis C (2001) Effect of impact on the compressive response of composite laminates. Compos Part A Appl Sci Manuf 32:1263–1270
Cantwell WJ, Morton J (1991) The impact resistance of composite materials. A review. Composites 22:347–362
Reid SR, Zhon G (2000) Impact behavior of fiber reinforced materials and structures. Woodhead Publishing Ltd, Cambridge
Barnus SD, Waidva UI (2007) A review. Impact damage of composite materials. J Adv Mater 39(3):3–21
Caprino F, Lamanna G, de Luca A, Loprsto V, Riccio A (2015) Numerical investigation of onset and evolution of LVI damages in carbon-epoxy plates. Compos Part B 68:385–391
LaMartina B, Li G, Hui D (2003) Blast/impact on engineered (nano) composite materials. Compos Part B 40:413–415
Caprino G, Langella A, Lopresto V (2003) Indentation and penetration of carbon fiber reinforced plastic laminates. Compos Part B 34:319–325
Panettieri E, Fanteria D, Montemustey M, Froustey C (2016) Low-velocity impact tests on carbon/epoxy composite laminates. A benchmark study. Compos Part B Eng 107:9–21
Minak G, Ghelli D (2008) Influence of diameter and boundary conditions on low velocity impact response of CFRP circular laminated plates. Compos Part B 39:962–972
Iremonger M, Went AC (1996) Ballistic impact of fiber composite armours by fragment simulating projectiles. Compos Part A 27:575–581
Cuniff PM (1996) A semiempirical model for the ballistic impact performance of textile-based personnel armor. Textile Research Journal, 66(1):45–58.
Syngellakis S (2014) Projectile impact. Modelling techniques and target Peformance assessment. WIT Press Southhampton
Sánchez-Gálvez V, Galvez F, Hernandez E, Cendon D (2015) Ballistic performance of carbon/epoxy composites at very low temperatures. In: Proceedings 66 Aeroballistic range association meeting. San Antonio, Texas
Department of Defence USA (2000) Composite materials handbook, vol 3
Shenoi RA, Dulleu-Barton JM, Quinn S, Blake JIR, Boyd SW (2007) Composite materials for marine applications. Key challenges for the future. School of Engineering Sciences, University of Southampton
Grabovac I (2005) Composite reinforcement for naval ships. Concept design, analysis and demonstration. School of Applied Sciences, RMIT University
Sanchez Paradela L, Sanchez-Galvez V (2013) Analytical simulation of high-speed impact onto composite materials targets. J Strain Anal Eng Des 48(5):282–290
Sánchez-Gálvez V, Galvez F, Sancho R, Cendon D (2017) A new analytical model to simulate high-speed impact onto composite materials targets. Int J Impact Eng 108:322–333
Sánchez-Gálvez V, Sánchez Paradela L, Gálvez F (2014) Analytical simulation of high-speed impact onto hybrid glass/carbon epoxy composites targets. Procedia Eng 88:101–108
Cox BN, Carter CW, Fleck N (1994) A binary model of textile composites-I. Formulation. Acta Metall Mater 42(10):3463–3479
LS-DYNA Theory manual (2006) Livermore software technology corporation, California
Arbaoui M, Tarfaoui A, El Malki Alaoui A (2016) Mechanical behavior and damage kinetics of woven E-glass/vinylester laminate composites under high strain rate dynamic compressive loading: experimental and numerical investigation. Int J Impact Eng 87:44–54
Barré S, Chotard T, Benzeggagh ML, Townsend, Grabovac I (1996) Comparative study of strain rate effects on mechanical properties of glass fiber-reinforced thermoset matrix composite. Compos Part A 27(12):1169–1181
Matzenmiller A, Lubliner J, Taylor RL (1995) A constitutive model for anisotropic damage in fiber-composites. Mech Mater 20(2):125–152
Acknowledgements
Authors are indebted to Dr. Yapa Rajapakse and Office of Naval Research (ONR) for financial support of this research trough the Solid Mechanics Program.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Sánchez-Gálvez, V., Cendón, D.A., Sancho, R., Gálvez, F. (2020). Recent Developments on Ballistic Performance of Composite Materials of Naval Relevance. In: Lee, S. (eds) Advances in Thick Section Composite and Sandwich Structures. Springer, Cham. https://doi.org/10.1007/978-3-030-31065-3_6
Download citation
DOI: https://doi.org/10.1007/978-3-030-31065-3_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-31064-6
Online ISBN: 978-3-030-31065-3
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)