Abstract
Additional components necessary for the evaluation of a HSC’s in-service power performance are briefly discussed here (see also Sect. 1.3).
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Bailey D (1982) A statistical analysis of propulsion data obtained from models of high speed round bilge hulls. In: RINA symposium on small fast warships and security. Vessels, London
Blount DL (1997) Design of propeller tunnels for high speed craft. In: Proceedings of the 4th international conference on fast sea transportation (FAST ’97). Sydney
Blount DL (2014) Performance by design. ISBN 0-978-9890837-1-3
Blount DL, Bartee RJ (1997) Design of propulsion systems for high-speed craft. Mar Technol 34(4)
Blount DL, Bjarne E (1989) Design and selection of propulsors for high speed craft. In: 7th Lips propeller symposium. Nordwijk-on-Sea
Blount DL, Codega LT (1992) Dynamic stability of planing boats. Mar Technol 29
Blount DL, Fox DL (1976) Small craft power prediction. Mar Technol 13(1)
Blount DL, McGrath JA (2009) Resistance characteristics of semi-displacement mega yacht hull forms. RINA Trans, vol 151, Part B2, Int. J. Small Craft Technol, July–Dec
Bowles J (2012) Turning characteristics and capabilities of high speed Monohulls. In: SNAME’s 3rd Chesapeake power boat symposium. Annapolis
Brown PW (1971) An experimental and theoretical study of planing surfaces with trim flaps. Davidson Laboratory Report 1463. Stevens Institute of Technology
Celano T (1998) The prediction of porpoising inception for modern planing craft. USNA Trident Report No. 254. Annapolis
Chen CS, Hsueh TJ, Fwu J (1993) the systematic test of wedge on flat plate planing surface. In: Proceedings of 2nd international conference on fast sea transportation (FAST ’93). Yokohama
Clement EP (1964) Reduction of planing boat resistance by deflection of the whisker spray. DTMB Report 1920
Cusanelli D, Karafiath G (1997) Integrated wedge-flap for enhanced powering performance. In: Proceedings of 4th international conference on fast sea transportation (FAST ’97). Sydney
De Luca F, Pensa C (2012) Experimental investigation on conventional and unconventional interceptors. RINA Trans, vol. 153, Part B2, Int. J. Small Craft Technol, July–Dec
Denny SB, Hubble EN (1991) Predicting of craft turning characteristics. Mar Technol 28(1)
Faltinsen OM (2005) Hydrodynamics of high-speed marine vehicles. Cambridge University Press. ISBN-13 978-0-521-84568-7
Fossati F, Muggiasca S, Bertorello C (2013) Aerodynamics of high speed small craft. In: Proceedings of 12th international conference on fast sea transportation (FAST 2013). Amsterdam
Fossati F, Robustelli F, Belloli M, Bertorello C, Dellepiane S (2014) Experimental assessment of mega-yacht aerodynamic performance and characteristics. RINA Trans, vol. 156, Part B2. London. https://doi.org/10.3940/rina.ijsct.2014.b2.157)
Fridsma G (1971) A systematic study of the rough water performance of planing boats (Irregular Waves—Part II). Davidson Laboratory Report 1495
Friedhoff B, Henn R, Jiang T, Stuntz N (2007) Investigation of planing craft in shallow water. In: Proceedings of 9th international conference on fast sea transportation (FAST 2007). Shanghai
Gregory D, Beach T (1979) Resistance measurements of typical planing boat appendages. DTNSRDC Report SPD-0911-01
Gregory DL, Dobay GF (1973) The performance of high-speed rudders in a cavitating environment. SNAME Spring Meeting, Florida
Grigoropoulos GJ, Loukakis TA (1995) Effect of spray rails on the resistance of planing hulls. In: Proceedings of 3rd International conferences on fast sea transportation (FAST ’95). Lubeck-Travemunde
Hadler JB (1966) The prediction of power performance of planing craft. SNAME Trans, vol 74
Hoerner SF (1965) Fluid dynamic drag. Midland Park, NJ (Book published by the author)
Hofman M, Kozarski V (2000) Shallow water resistance charts for preliminary vessel design. Int Shipbuilding Prog 47(449)
Hofman M, Radojčić D (1997) Resistance and propulsion of fast ships in shallow water. University of Belgrade, Faculty of Mechanical Engineering, Belgrade (in Serbian). ISBN 86-7083-297-6
Hoggard MM (1979) Examining added drag of planing craft operating in the seaway. Hampton Road Section of SNAME
Hoggard MM, Jones MP (1980) Examining pitch, heave and accelerations of planing craft operating in a seaway. In: High speed surface craft conference. Brighton
ITTC (1984) Proceedings of the 17th international towing tank conference, high-speed propulsion, vol 1. Goteborg
ITTC (2011) Recommended procedures and guidelines—high speed marine vehicles (Section 7.5-02-05)—Resistance test, Section 7.5-02-05-01; Propulsion test, Section 7.5-02-05-02
Katayama T, Nishihara Y, Sato T (2012) A study on the characteristics of self-propulsion factors of planing craft with outboard engine. In: SNAME’s 3rd Chesapeake power boat symposium. Annapolis
Lasky MP (1980) An investigation of appendage drag. DTNSRDC Report SPD-458-01
Lewandowski E (1993) Manueverability of high-speed power boats. In: 5th Power boat symposium, SNAME Southeast Section
Lewandowski E (1997) Transverse dynamic stability of planing craft. Mar Technol 34(2)
Lyakhovitsky A (2007) Shallow water and supercritical ships. Backbone Publishing Company, Hoboken, NJ
Millward A (1976) Effect of wedges on the performance characteristics of two planing hulls. J Ship Res 20(4)
Millward A, Sproston J (1988) The prediction of resistance of fast displacement hulls in shallow water. RINA Maritime Technology Monograph No. 9, London
Molland AF, Turnock SR (2007) Marine rudders and control surfaces—principles, data, design and applications. Elsevier. ISBN 978-0-75-066944-3
Molland AF, Turnock SR, Hudson DA (2011) Ship resistance and propulsion—practical estimation of ship propulsive power. Cambridge University Press. ISBN 978-0-521-76052-2
Morabito MG (2013) Planing in shallow water at critical speed. J Ship Res 57(2)
Müller-Graf B (1981) Semi-displacement round bilge vessels. In: Status of hydrodynamic technology as related to model tests of high speed marine vehicles (Section 3.2). DTNSRDC Report 81/026
Müller-Graf B (1991) The effect of an advanced spray rail system on resistance and development of spray on semi-displacement round bilge hulls. In: Proceedings of 1st international conference on fast sea transportation (FAST ‘91). Trondheim
Müller-Graf B (1997a) Part I: Resistance components of high speed small craft. In: 25th WEGEMT School, Small Craft Technology, NTUA, Athens. ISBN I 900 453 053
Müller-Graf B (1997b) Part III: Factors affecting the reliability and accuracy of the resistance prediction. In: 25th WEGEMT School, Small Craft Technology, NTUA, Athens. ISBN I 900 453 053
Müller-Graf B (1997c) Dynamic stability of high speed small craft. In: 25th WEGEMT School, Small Craft Technology, NTUA, Athens. ISBN I 900 453 053
Radojčić D, Bowles J (2010) On high speed monohulls in shallow water. In: SNAME’s 2nd Chesapeake power boat symposium. Annapolis
Ruscelli D, Gualeni P, Viviani M (2012) An overview of planing monohulls transverse dynamic stability and possible implications with static intact stability rules. RINA Trans, vol. 154, Part B2. London. https://doi.org/10.3940/rina.ijsct.2012.b2.134)
Rutgersson O (1982) High speed propeller performance—influence of cavitation on the propeller-hull interaction. Ph.D. thesis, Chalmers University of Technology, Goteborg. ISBN 91-7032-072-1
Savitsky D (1981) Planing hulls. In: Status of hydrodynamic technology as related to model tests of high speed marine vehicles (Section 3.3). DTNSRDC Report 81/026
Savitsky D, Brown PW (1976) Procedure for hydrodynamic evaluation of planing hulls in smooth and rough water. Mar Technol 13(4)
Savitsky D, Koelbel JG (1993) Seakeeping of hard chine planing hulls. SNAME’s Technical and Research Panel SC-1 (Power Craft), Report R-42
Scherer JO, Patil SKR (2011) Hydrodynamics of surface piercing outboard and sterndrive propulsion systems. In: Proceedings of 11th international conference on fast sea transportation (FAST 2011). Honolulu
Schleicher DM (2008) Regarding small craft seakeeping. In: SNAME’s 1st Chesapeake power boat symposium. Annapolis
Toro A (1969) Shallow-water performance of a planing boat. Michigan University (AD-A016 682), Department of Naval Architecture and Marine Engineering. Report No. 019
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Radojčić, D., Kalajdžić, M., Simić, A. (2019). Additional Resistance Components and Propulsive Coefficients. In: Power Prediction Modeling of Conventional High-Speed Craft. Springer, Cham. https://doi.org/10.1007/978-3-030-30607-6_5
Download citation
DOI: https://doi.org/10.1007/978-3-030-30607-6_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-30606-9
Online ISBN: 978-3-030-30607-6
eBook Packages: Mathematics and StatisticsMathematics and Statistics (R0)