Abstract
Continuous increase in the die size accompanied by reduction of the metal line cross sections and, hence by increase of the current densities governed by a technology scaling, results in an increasingly difficult EM signoff when the traditional EM checking approaches are employed. In these approaches, the EM-induced failure rates of the individual interconnect lines are considered as a measure of EM-induced reliability and, in the extreme end, a mean time to failure (MTTF) of the weakest segment is accepted as a measure for the whole chip lifetime. It results in a very conservative design rules for the current densities that can be used in the chip design for a particular technology node in order to avoid EM failure.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
S. Chatterjee, M.B. Fawaz, F.N. Najm, Redundancy-aware electromigration checking for mesh power grids, in Proceedings of the International Conference on Computer Aided Design (ICCAD) (IEEE, Piscataway, 2013), pp. 540–547
R.M. Christensen, Mechanics of Composite Materials—Richard M. Christensen—Google Books (Dover Publication, New York, 2005)
W. Huang, M.R. Stan, K. Skadron, Parameterized physical compact thermal modeling. IEEE Trans. Compon. Packag. Technol. 28(4), 615–622 (2005)
X. Huang, A. Kteyan, S.X.-D. Tan, V. Sukharev, Physics-based electromigration models and full-chip assessment for power grid networks. IEEE Trans. Comput. Aided Des. Integr. Circuits Syst. 35(11), 1848–1861 (2016)
M.A. Korhonen, P. Bo/rgesen, K.N. Tu, C.-Y. Li, Stress evolution due to electromigration in confined metal lines. J. Appl. Phys. 73(8), 3790–3799 (1993)
K.-D. Lee, Electromigration recovery and short lead effect under bipolar- and unipolar-pulse current, in IEEE International Reliability Physics Symposium (IRPS) (IEEE, Piscataway, 2012), pp. 6B.3.1–6B.3.4
V. Mishra, S.S. Sapatnekar, The impact of electromigration in copper interconnects on power grid integrity, in 2013 50th ACM/EDAC/IEEE Design Automation Conference (DAC) (IEEE, Piscataway, 2013), pp. 1–6
S.R. Nassif, Power grid analysis benchmarks, in Proceedings of the Asia South Pacific Design Automation Conference (ASPDAC) (IEEE, Piscataway, 2008), pp. 376–381
A. Sridhar, A. Vincenzi, M. Ruggiero, T. Brunschwiler, D.A. Alonso, 3D-ICE: fast compact transient thermal modeling for 3D-ICs with inter-tier liquid cooling, in Proceedings International Conference on Computer Aided Design (ICCAD) (IEEE, Piscataway, 2010), pp. 463–470
V. Sukharev, X. Huang, S.X.-D. Tan, Electromigration induced stress evolution under alternate current and pulse current loads. J. Appl. Phys. 118, 034504 (2015)
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Tan, S., Tahoori, M., Kim, T., Wang, S., Sun, Z., Kiamehr, S. (2019). EM Assessment for Power Grid Networks. In: Long-Term Reliability of Nanometer VLSI Systems. Springer, Cham. https://doi.org/10.1007/978-3-030-26172-6_7
Download citation
DOI: https://doi.org/10.1007/978-3-030-26172-6_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-26171-9
Online ISBN: 978-3-030-26172-6
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)