Abstract
The main areas of industrial applications of hydraulic hammers and basic development trends of these devices are presented. Basic functional structures and design structures of hydraulic hammers were characterized. On this background, the limit of further development of conventional hydraulic hammers was determined. Basic research problems have been formulated in relation to hammers used especially in mining and civil engineering. Examples of process analyzes in a hydraulic excitation system and in impact excitation system of conventional hydraulic hammers are presented.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Hlushkova, D.B., Ryzhkov, YuV, Kostina, L.L., Demchenko, S.V.: Increase of wear resistance of the critical parts of hydraulic hammer by means of ion-plasma treatment. Voprosy Atomnoj Nauki i Tekhniki 1–113, 208–211 (2018)
Hawryluk, M. Mrzygłód, B.A.: Durability analysis of forging tools for different operating conditions with application of a decision support system based on artificial neural networks (ANN). Eksploatacja i Niezawodnosc—Maint. Reliab. 19(3), 338–348 (2017)
Sokolski, M.: Über die Struktur der Stosserzwingung in Arbeitssystemen von Hydraulikhämmern, [w:] „Off-road machine and vehicles in theory and practice“. In: Dudziński, P. (ed) Proceedings of the 1st International conference, 23–24 Sept 1996, pp. 383–389. ISTVS-East Eur., Office Tech. Univ., Wroclaw (1996)
Sokolski, M.: Młoty hydrauliczne - tendencje rozwojowe w minionym ćwierćwieczu (Hydraulic hammers—development trends in the past quarter – century). Górnictwo Odkrywkowe. R. 50, nr 4/5, 123–128 (2009) (in Polish)
Sokolski, M.: Postawy syntezy charakterystyk młotów hydraulicznych (Fundamentals of Synthesis of Characteristics of Hydraulic Hammers). Publishing House Oficyna Wydawnicza Politechniki Wroclawskiej, Wrocław (2013). (in Polish)
Sokolski, M.: Neue Entwicklungsrichtung bei Hydraulikhämmern für Erdbaumaschinen, [w:] „Mechanisierung im Erdbau“. XIII. Internationale Konferenz, TU Dresden, 6–8 Sept 1988. Dresden 1988, 1–4
Bauer, E.E.: Contech Mining Application Manual. Consolidated Technologies. Corp., Mining Division, Denver (sine anno)
Grantmyre, I.: Hawkes I.: High-energy impact rockbreaking. Can. Min. Metall. Bull. (1975)
Etherington, M., Deering, D.: The fluid tappet—a new concept in high energy impact breaking. In: Earthmoving Industry Conference, Central Illinois Section, Peoria, IL, 10–12 April 1978
Zhu, M., Zhao, S., Dong, P.: Modelling and simulation of a direct drive reversing valve for the hydraulic die forging hammer. In: 2016 IEEE International Conference on Aircraft Utility Systems (AUS), Beijing, pp. 206–211 (2016)
Redelin, R.A., Kravchenko, V.A., Kamanin, Y.N., Panichkin, A.V., Bozhanov, A.A.: Study of effect of in-line hydropneumatic accumulators on output characteristics of hydraulic hammer. In: IOP Conference Series: Earth and Environmental Science, 10/2017, Vol. 87, Issue 2, pp. 22016, ISSN 1755–1307
Krauze, K.: Experimental determination of impact energy of hydraulic hammers. Arch. Mech. Eng. XLVII(1), 21–32 (2000)
Szykowny, K.: Określenie energii udaru młotów hydraulicznych na podstawie pomiarów wy-branych parametrów pracy (Determination of impact energy of hydraulic hammers on the basis of measurements of operation parameters), (PhD Thesis, supervisor: prof. K. Krauze), AGH Kraków – Lubin (2006) (in Polish)
Boczarow, J.A., Prokofiew, W.N.: Napędy hydrauliczne pras i młotów (Hydraulic drive systems of Presses and Hammers). Publishing House WNT, Warszawa (1971) (in Polish)
Mezentsev, I.V.: Influence of design factors on the efficiency of hydraulic hammers. J. Min. Sci. 39(4), 400–404 (2003)
Park, J.-W., Kim, H.-E.: Development of the test system for measuring the impact energy of a hydraulic breaker. In: Proceedings of the 6th JFPS International Symposium on Fluid Power, pp. 75–79, TSUKUBA 7–10 Nov 2005
Giuffrida, A., Laforgia, D.: Modelling and simulation of a hydraulic breaker. Int. J. Fluid Power 6(2), 47–56 (2005)
Sokolski, M.: A computer-aided method for diagnostic testing of single-acting hydraulic hammers. Model. Simul. Control B 36(2), 55–63 (1991)
Sokolski, M., Sokolski, P.: Assessment of the probability of failure-free operation of the working system of a small-dimension hydraulic hammer—a case study. In: Podofillini, L., et al. (eds.) Safety and Reliability of Complex Engineered Systems, pp. 4213–4217. Taylor & Francis Group, London (2015)
Sokolski, M., Sokolski, P.M.: Strength estimation of the impact zone—a critical area of the tools of the hydraulic hammers. Arch. Civil Mech. Eng. 16(4), 767–776 (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Sokolski, M. (2020). Development Trends and Research Problems of Hydraulic Hammers for Mining and Civil Engineering. In: Sokolski, M. (eds) Mining Machines and Earth-Moving Equipment. Springer, Cham. https://doi.org/10.1007/978-3-030-25478-0_9
Download citation
DOI: https://doi.org/10.1007/978-3-030-25478-0_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-25477-3
Online ISBN: 978-3-030-25478-0
eBook Packages: EngineeringEngineering (R0)