Abstract
The development and implementation of automated and robotic welding production lines is an urgent task of the last decade. The wide application of hybrid laser-arc welding (HLAW) is difficult due to sensitivity to changes in a large number of process parameters, as well as fluctuations in gap between welded edges and to the edge preparation quality. The need to solve these problems has led to the development of methods and algorithms for the numerical simulation of the HLAW. The developed mathematical model is able to predict effects of process parameters and heat flux distribution of the hybrid heat source on the formation of the surface of weld bead and temperature field in welded joint. The model is divided into the following sub-models: wire melting; heat conduction in the molten pool and the substrate; formation of the surface of the weld. Comparison of the calculated and experimental data of melting rate of the electrode wire and the formation of welded joints during HLAW of T-joint showed good agreement. The effect of fluctuations in the process parameters on the quality of welded joints was established by simulation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Unt A, Salminen A (2015) Effect of welding parameters and the heat input on weld bead profile of laser welded T-joint in structural steel. J Laser Appl 27. https://doi.org/10.2351/1.4906378
Unt A, Poutiainen I, Grünenwald S, Sokolov M, Salminen A (2017) High power fiber laser welding of single sided T-joint on shipbuilding steel with different processing setups. Appl Sci 7:1276. https://doi.org/10.3390/app7121276
Turichin G, Kuznetsov M, Tsibulskiy I, Firsova A (2017) Hybrid laser-arc welding of the high-strength shipbuilding steels: equipment and technology. Phys Proc 89:156–163
Turichin G, Tsibulskiy I, Kuznetsov M, Akhmetov A, Mildebrath M (2015) Influence of the gap width on the geometry of the welded joint in hybrid laser-arc welding. Phys Proc 78:14–23
Sokolov M, Salminen A, Somonov V (2012) Laser welding of structural steels: influence of the edge roughness level. Opt Laser Technol 44(7):2064–2071
You D, Gao X, Katayama S (2014) Review of laser welding monitoring. Sci Technol Weld Joi 19(3):181–201
Ribic B, Palmer T, DebRoy T (2009) Problems and issues in laser-arc hybrid welding. Int Mater Rev 54(4):223–244
Cho M, Farson D, Lim Y, Choi H (2007) Hybrid laser/arc welding process for controlling bead profile. Sci Technol Weld Joi 12(8):677–688
Nin J, Zhang L, Na S (2017) Numerical study of the effect of laser-arc distance on laser energy coupling in pulsed Nd: YAG laser/TIG hybrid welding. Int J Adv Manuf Technol 91:1129. https://doi.org/10.1007/s00170-016-9812-9
Turichin G, Valdaytseva E, Tzibulsky I, Lopota A, Velichko O (2011) Simulation and technology of hybrid welding of thick steel parts with high power fiber laser. Phys Proc 12:646–655
Pittner A (2012) A contribution to the solution of the inverse heat conduction problem in welding simulation. BAM Federal Institute for Materials Research and Testing
Hirata Y (1995) Physics of welding (III)—melting rate and temperature distribution of electrode wire). Weld Int 9(5):348–351
Maruo H, Hirata Y, Noda Y (1984) Heat contents and temperature of metal droplets in pulsed MIG welding. Quart J Jpn Weld Soc 2(4):573–578
Maruo H, Hirata Y, Noda Y (1985) Wire melting rate in pulsed MIG welding—study on pulsed arc welding (report 3). Quart J Jpn Weld Soc 3(1):191–196
Halmoy E (1979) Wire melting rate, droplet temperature and effective anode melting potential. In: Arc physics and weld pool behaviour. international conference, London, pp 49–57
Halmoy E (1991) Current-voltage process characteristics in gas metal arc welding. ASME Weld Join Process 51:17–27
Nguyen N (2004) Thermal analysis of welds. WIT Press
Landau L, Lifshits E (1959) Fluid mechanics. Pergamon Press
Wahba M, Mizutani M, Katayama S (2015) Hybrid welding with fiber laser and CO2 gas shielded arc. J Mater Process Technol 221:146–153
Pavlyk V (2004) Modelling and direct numerical simulation of dendritic structures under solidification conditions during fusion welding. Shaker Verlag GmbH
ISO 12932 (2013) Welding—laser-arc hybrid welding of steels, nickel and nickel alloys—quality levels for imperfections
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Ivanov, S., Valdaytseva, E., Udin, I. (2020). Model for Numerical Simulation of Temperature Field and Bead Profile in Hybrid Laser-Arc Welding of T-Joint. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019). ICIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-22063-1_43
Download citation
DOI: https://doi.org/10.1007/978-3-030-22063-1_43
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-22062-4
Online ISBN: 978-3-030-22063-1
eBook Packages: EngineeringEngineering (R0)