Abstract
The concepts of louvered fins and convex louvered fins have been briefed in this particular chapter. The effect of fin parameters on heat transfer and pressure drop characteristics has been discussed. The performance comparison of louvered fins with that of offset-strip fins has also been presented. The correlations developed for louvered fins by different researchers have been considered.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Achaichia A, Cowell IA (1988) Heat transfer and pressure drop characteristics of flat tube and louvered plate fin surfaces. Exp Therm Fluid Sci 1:147–157
Aoki H, Shinagawa T, Suga K (1989) An experimental study of the local heat transfer characteristics in automotive louvered fins. Exp Therm Fluid Sci 2:293–300
Beecher DT, Fagan TJ (1987) Effects of fin pattern on the air-side heat transfer coefficient in plate finned-tube heat exchangers. ASHRAE Trans 93(2):1961–1984
Bellows KD (1996) Flow visualization of louvered-fin heat exchangers. In: Master’s thesis. University of Illinois, Urbana, Champaign
Burgess NK, Ligrani PM (2004) Effects of dimple depth on Nusselt numbers and friction factors for internal cooling in a channel. In: ASME turbo expo 2004: power for land, sea, and air. ASME, pp 989–998
Chang YJ, Wang CC (1996) Air side performance of brazed aluminum heat exchangers. J Enhanc Heat Transf 3:15–28
Chang YJ, Wang CC (1997) A generalized heat transfer correlation for louver fin geometry. Int J Heat Mass Transfer 40:533–544
Chang YJ, Hsu KC, Lin YT, Wang CC (2000) A generalized friction correlation for louver fin geometry. Int J Heat Mass Transfer 43:2237–2243
Chyu MK, Yu Y, Ding H, Downs JP, Soechting FO (1997) Concavity enhanced heat transfer in an internal cooling passage. In: ASME 1997 international gas turbine and aeroengine congress and exhibition. ASME, pp. V003T09A080–V003T09A080
Critoph RE, Holland MK, Turner L (1996) Contact resistance in air-cooled plate fin-tube air-conditioning condensers. Int J Refrig 19:400–406
Critoph RE, Holland MK, Fisher M (1999) Comparison of steady state and transient methods for measurement of local heat transfer in plate fin-tube heat exchangers using liquid crystal thermography with radiant heating. Int J Heat Mass Transfer 42:1–12
Davenport CJ (1980) Heat transfer and fluid flow in the louvered-fin heat exchanger. PhD thesis, Lanchester Polytechnic, Lanchester, UK
Davenport CJ (1983a) Correlations for heat transfer and flow friction characteristics of louvered fin. In: Heat transfer Seattle, AIChE symposium, series no. 225(79):19–27
Davenport CJ (1983b) Heat transfer and flow friction characteristics of louvered heat exchanger surfaces heat exchangers: theory and practice. In: Taborek J, Hewitt GF, Afgan N (eds) . Hemisphere, Washington, DC, pp 387–412
DeJong NC, Jacobi AM (2003) Localized flow and heat transfer interactions in louvered-fin arrays. Int J Heat Mass Transfer 46(3):443–455
Dillen ER, Webb RL (1994) Rationally based heat transfer and friction correlations for the louver fin geometry. SAE Paper 940504, Warrendale, PA
Eckels PW, Rabas TJ (1987) Dehumidification: on the correlation of wet and dry transport processes in plate finned-tube heat exchangers. J Heat Transfer 109:575–582
Ekkad SV, Nasir H (2003) Dimple enhanced heat transfer in high aspect ratio channels. J Enhanc Heat Transf 10(4):395–406
Elyyan MA, Tafti DK (2009) Flow and heat transfer characteristics of dimpled multilouvered fins. J Enhanc Heat Transf 16(1):43–60
Fujii M, Seshimo Y, Yarnananaka G (1988) Heat transfer and pressure drop of the perforated surface heat exchanger with passage enlargement and contraction. Int J Heat Mass Transfer 31:135–142
Fujikake K, Aoki H, Mitui H (1983) An apparatus for measuring the heat transfer coefficients of finned heat exchangers by use of a transient method. In: Proc Japan 20th symposium on heat transfer, pp 466–468
Ha S, Kim C, Ahn S, Dreitser GA (1998) Condensate drainage characteristics of plate fin-and-tube heat exchanger. In: Heat exchangers for sustainable dev, Lisbon, Portugal, pp 423–430
Hatada T, Senshu T (1984) Experimental study on heat transfer characteristics of convex louver fins for air conditioning heat exchangers. ASME paper 84-HT-74, New York
Hitachi (1984) Chapter 5: Plate-and-fin extended surfaces. In: Hitachi high-performance heat transfer tubes cat no EA-500. Hitachi Cable Co., Tokyo, Japan, p 140
Huang CH, Yuan IC, Ay H (2003) A three-dimensional inverse problem in imaging the local heat transfer coefficients for plate finned-tube heat exchangers. Int J Heat Mass Transfer 46:3629–3638
Joshi HM, Webb RL (1987) Prediction of heat transfer and friction in the offset-strip fin array. Int J Heat Mass Transfer 30:69–84
Kajino M, Hiramatsu M (1987) Research and development of automotive heat exchangers. In: Heat transfer in high technology and power engineering conference, pp 420–432
Kayansayan N (1993) Heat transfer characterization of plate fin-tube heat exchangers. Heat Recov Syst CHP 13(1):67–68
Kays WM, Crawford ME (1980) Convective heat and mass transfer. McGraw-Hill, New York, p 151
Kim J-Y, Song T-H (2003) Effect of tube alignment on the heat/mass transfer from a plate fin and two-tube assembly: naphthalene sublimation results. Int J Heat Mass Transf 46:3051–3059
Kim NH, Yun JH, Webb RL (1997) Heat transfer and friction correlations for wavy plate fin-and-tube heat exchangers. J Heat Transfer 119(3):560–567
Kundu B, Das PK (1997) Optimum dimensions of plate fins for fin-tube heat exchangers. Int J Heat Fluid Flow 18:530–537
Kushida G, Yamashita H, Izumi R (1986) Fluid flow and heat transfer in a plate-fin and tube heat exchanger (analysis of heat transfer around a square cylinder situated between parallel plates). Bull JSME 29(258):4185–4191
Leu J-S, Wu Y-H, Jang J-Y (2004) Heat transfer and fluid flow analysis in plate-fin and tube heat exchangers with a pair of block shape vortex generators. Int J Heat Mass Transf 47:4327–4338
Ligrani PM, Harrison JL, Mahmmod GI, Hill ML (2001) Flow structure due to dimple depressions on a channel surface. Phys Fluids 13(11):3442–3451
Lyman AC, Stephan RA, Thole KA, Zhang LW, Memory SB (2002) Scaling of heat transfer coefficients along louvered fins. Exp Therm Fluid Sci 26(5):547–563
Mahmood GI, Hill ML, Nelson DL, Ligrani PM, Moon HK, Glezer B (2001) Local heat transfer and flow structure on and above a dimpled surface in a channel. J Turbomach 123(1):115–123
Maltson JD, Wilcock D, Davenport CJ (1989) Comparative performance of rippled fin plate fin and tube heat exchangers. J Heat Transfer 111:21–28
McQuiston FC (1978) Correlation of heat, mass, and momentum transport coefficients for plate-fin-tube heat transfer for surfaces with staggered tube. ASHRAE Trans 54(1):294–309
Michna GJ, Jacobi AM, Burton RL (2007) An experimental study of the friction factor and mass transfer performance of an offset-strip fin array at very high Reynolds numbers. J Heat Transfer 129(9):1134–1140
Moon HK, O’connell T, Glezer B (1999) Channel height effect on heat transfer and friction in a dimpled passage. In: ASME 1999 international gas turbine and aeroengine congress and exhibition. ASME, pp. V003T01A043–V003T01A043
Muzychka YS, Kenway G (2009) A model for thermal-hydraulic characteristics of offset strip fin arrays for large Prandtl number liquids. J Enhanc Heat Transf 16(1):73–92
Muzychka YS, Yovanovich MM (2001) Modeling the f and j characteristics of the offset strip fin array. J Enhanc Heat Transf 8(4):261–277
Nacerbey M, Russell S, Baudoin B (2003) PIV visualizations of the flow structure upstream of the tubes in a two-row plate fin-and-tube heat exchanger. In: Shah RK, Deakin AW, Honda H, Rudy TM (eds) Proc of the fourth int conf on compact heat exchangers and enhancement technology for the process industries. Begell House Inc., New York, pp 63–68
Pauley LL, Hodgson JE (1994) Flow visualization of convex louver fin arrays to determine maximum heat transfer conditions. Exp Therm Fluid Sci 9(1):53–60
Rich DG (1975) Effect of the number of tube rows on heat transfer performance of smooth plate fin-and-tube heat exchangers. ASHRAE Trans 81(1):307–319
Rugh JP, Pearson JT, Ramadhyani S (1992) A study of a very compact heat exchanger used for passenger compartment heating in automobiles in compact heat exchangers for power and process industries. ASME Symp Ser HTD 201:15–24
Saboya FEM, Sparrow EM (1974) Local and average heat transfer coefficients for one-row plate fin and tube heat exchanger configurations. J Heat Transfer 96:265–272
Saboya FEM, Sparrow EM (1976) Transfer characteristics of two-row plate fin and tube heat exchanger configurations. Int J Heat Mass Transf 19:41–49
Saboya FEM, Rosman EC, Carajilescov P (1984) Performance of one- and two-row tube and plate fin heat exchangers. J Heat Transfer 106:627–632
Sahnoun A, Webb RL (1992) Prediction of heat transfer and friction for the louver fin geometry. J Heat Transfer 114:893–900
Seshimo Y, Fujii M (1987) Heat transfer and friction performance of plate fin and tube heat exchangers at low Reynolds number (1st report: characteristic of single-row). Abstract Bull JSME 30:1688–1689
Seshimo Y, Fujii M (1991) An experimental study on the performance of plate fin and tube heat exchangers at low Reynolds numbers. In: Proc of the ASME-JSME thermal eng joint conference, vol 4, pp 449–454
Shah RK, Sekulic DP (2003) Fundamentals of heat exchanger design. John Wiley & Sons, New York
Shah RK, Webb RL (1982) Compact and enhanced heat exchangers. In: Taborek J, Hewitt GF, Afgan NH (eds) Heat exchangers: theory and practice. Hemisphere, Washington, DC, pp 425–468
Suga K, Aoki H (1995) Numerical study on heat transfer and pressure drop in multilouvered fins. J Enhanc Heat Transf l(3):231–238
Suga T, Aoki H (1991) Numerical study on heat transfer and pressure drop in multilouvered fins. In: Proc ASME/JSME joint thermal engineering conference, vol 4
Suga K, Aoki H, Shinagawa T (1990) Numerical analysis on two dimensional flow and heat transfer of louvered fins using overlaid grids. JSME Int J Ser II 33:122–127
Sunden B, Svantesson J (1990) Thermal hydraulic performance of new multilouvered fins. In: Proc 9th int heat trans conf, vol 5, pp 91–96
Suzuki K, Hirai E, Miyake T, Sato T (1985) Numerical and experimental studies on a two-dimensional model of an offset-strip-fin type compact heat exchanger used at low Reynolds number. Int J Heat Mass Transfer 28(4):823–836
Tafti DK (1999) Time-dependent calculation procedure for fully developed and developing flow and heat transfer in louvered fin geometries. Numer Heat Transfer Part A Appl 35(3):225–249
Tafti DK, Zhang X (2001) Geometry effects on flow transition in multilouvered fins–onset, propagation, and characteristic frequencies. Int J Heat Mass Transfer 44(22):4195–4210
Taler D (2004) Experimental determination of heat transfer and friction correlations for plate fin-and-tube heat exchangers. J Enhanc Heat Transf 11:183–204
Tanaka T, Itoh M, Kudoh M, Tomita A (1984) Improvement of compact heat exchangers with inclined louvered fins. Bull JSME 27(224):219–226
Tomoda T, Suzuki K (1988) A numerical study of heat transfer on compact heat exchanger (effect of fin shape). In: 25th national heat transfer symp. of Japan, pp 175–177
Torikoshi K, Xi GN, Nakazawa Y, Asano H (1994) Flow and heat transfer performance of a plate fin-and-tube heat exchanger (1st report: effect of fin pitch). In: Heat trans proc of the 10th int heat trans conf, vol 4, pp 411–416
Toyoshima S, Fukumoto H, Nakagawa Y, Sakamoto Y (1986) Numerical analysis on flow of plate-fin heat exchangers. In: Proceedings, 246th Lecture meeting of The Japan Society of Mechanical Engineers Kansai Branch, pp 864–1
Tutar M, Akkoca A (2004) Numerical analysis of fluid flow and heat transfer characteristics in three-dimensional plate fin-and-tube heat exchangers. Numer Heat Transfer Part A 46:301–321
Wang C-C, Lee C-J, Chang C-T, Lin S-P (1999) Heat transfer and friction correlation for compact louvered fin-and-tube heat exchangers. Int J Heat Mass Transf 42:1945–1956
Wang CC, Chang CT (1998) Heat and mass transfer for plate fin-and-tube heat exchangers with and without hydrophilic coating. Int J Heat Mass Transfer 41:3109–3120
Wang CC, Chang YJ, Hsieh YC, Lin YT (1996) Sensible heat and friction characteristics of plate fin-and-tube heat exchangers having plane fins. Int J Refrig 19(4):223–230
Webb RL (1988) PSU unpublished data for five radiators
Webb RL, Jung SH (1992) Air-side performance of enhanced brazed aluminum heat exchangers. ASHRAE Trans 98(2):391–401
Webb RL, Trauger P (1991) How structure in the louvered fin heat exchanger geometry. Exp Therm Fluid Sci 4(2):205–217
Webb RL, Chang YJ, Wang CC (1995) Heat transfer and friction correlations for the louver fin geometry. In: IMechE symp C496/081/95
Webb RL, Kim NY (2005) Principles of enhanced heat transfer. Taylor and Francis, New York
Yamashita H, Kushida G, Izumi R (1987) Fluid flow and heat transfer in a plate-fin and tube heat exchanger (analysis of unsteady flow and heat transfer around a square cylinder situated between parallel plates. In: Proc of the 1987 ASME-JSME thermal eng joint conf, vol 4, pp 173–180
Zhang X, Tafti DK (2001) Classification and effects of thermal wakes on heat transfer in multilouvered fins. Int J Heat Mass Transfer 44(13):2461–2473
Zhang X, Tafti DK (2003) Flow efficiency in multi-louvered fins. Int J Heat Mass Transfer 46:1737–1750
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2020 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Saha, S.K., Ranjan, H., Emani, M.S., Bharti, A.K. (2020). Louver Fins and Convex Louver Fins. In: Heat Transfer Enhancement in Plate and Fin Extended Surfaces. SpringerBriefs in Applied Sciences and Technology(). Springer, Cham. https://doi.org/10.1007/978-3-030-20736-6_3
Download citation
DOI: https://doi.org/10.1007/978-3-030-20736-6_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-20738-0
Online ISBN: 978-3-030-20736-6
eBook Packages: EngineeringEngineering (R0)