Abstract
In the mining industry, the mining cycle is a very important part in the operating stage of every mining unit. Through the exploitation method used, the mining cycle provides mineral ore, which subsequently undergoes various metallurgical processes and its commercialization and thereby generates profits to the mining company. Currently, within this cycle, the hauling and transportation stages are those that have a lower efficiency with respect to the drilling and blasting stages. Therefore, the sector is always seeking effective ways to optimize these processes, reduce downtime and increase productivity. Six Sigma is a technique that allows for the continuous process improvement. In this study, the factors that generate inefficiency in the hauling cycle are determined, and alternatives are implemented to solve the main problem and improve the operations cycle.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Haviland, D., Marshall, J.: Fundamental behaviours of production traffic in underground mine haulage ramps. Int. J. Min. Sci. Technol. 25, 7–14 (2015)
Greberg, J., Salama, A., Gustafson, A., Skawina, B.: Alternative process flow for underground mining operations: analysis of conceptual transport methods using discrete event simulation. Int. J. Min. 1, 6–65 (2016)
Carrasco, J., Francisco, A.: Asignación dinámica de operadores de lhd para operación a distancia en minería subterránea (tesis para optar el título profesional de ingeniero minero) (2016). http://repositorio.uchile.cl/handle/2250/144483
Gustafson, A., Schunnesson, H., Galar, D., Kumar, U.: The influence of the operating environment on manual and automatic load-haul-dump machines: a fault tree analysis. Int. J. Min. Reclam. Environ. 27, 75–87 (2013)
Pérez, E., Edward, W.: Mejoras en el 2011 en la unidad uchucchacua de la compañía de minas buenaventura s.a.a (tesis para optar el título profesional de ingeniero de minas) (2012). http://cybertesis.uni.edu.pe/bitstream/uni/1299/1/perez_ee.pdf
Jang, G., Jeon, J.H.: A Six Sigma methodology using data mining: a case study on Six Sigma project for heat efficiency improvement of a hot stove system in a Korean steel manufacturing company. In: Communications in Computer and Information Science, pp. 72–80 (2009)
Vásquez, R., Juan, G.: Elección y aplicación del método tajeo por subniveles con taladros largos para mejorar la producción en la veta Gina Socorro Tajo 6675 - 2 de la U.E.A. Uchucchacua de la Compañía de Minas Buenaventura S.A.A. (Tesis para optar el título de INGENIERO DE MINAS) (2015). http://repositorio.uncp.edu.pe/handle/UNCP/3858
Salama, A., Greberg, J., Schunnesson, H.: The use of discrete event simulation for underground haulage mining equipment selection. Int. J. Min. Min. Eng. 5, 256–271 (2014)
Gustafson, A., Lipsett, M., Schunnesson, H., Galar, D., Kumar, U.: Development of a Markov model for production performance optimization. Application for semi-automatic and manual LHD machines in underground mines. Int. J. Min. Reclam. Environ. 28, 342–355 (2014)
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Rojas, K., Aramburú, V., Ramos, E., Raymundo, C., Moguerza, J.M. (2020). Six Sigma-Based Optimization Model in Hauling Cut and Fill Exploitation Activities to Reduce Downtime in Underground Mines in Peru. In: Karwowski, W., Trzcielinski, S., Mrugalska, B. (eds) Advances in Manufacturing, Production Management and Process Control. AHFE 2019. Advances in Intelligent Systems and Computing, vol 971. Springer, Cham. https://doi.org/10.1007/978-3-030-20494-5_34
Download citation
DOI: https://doi.org/10.1007/978-3-030-20494-5_34
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-20493-8
Online ISBN: 978-3-030-20494-5
eBook Packages: EngineeringEngineering (R0)