Abstract
A common challenge for autonomous mobile ground robots in unstructured environments is the traversal of obstacles without risking to tip over. Previous research on prevention of vehicle tip-over is mostly limited to basic mobility systems with only few degrees of freedom (DOF). In this paper, a novel whole-body motion planning approach is presented. Based on a 3D world model and a given planned path, the trajectories of all joints are optimized to maximize robot stability. The resulting motion plan allows the robot to cross obstacles without tipping over. Compared to existing approaches, the proposed approach considers environment- and self-collisions during planning. Few assumptions about the robot configuration are made which enables the adoption to different mobile platforms. This approach is evaluated for a simulated and a real robot. The platform is a tracked vehicle with adjustable flippers and a five DOF manipulator arm. In several test scenarios, it is shown that the proposed approach effectively prevents tip-over and increases robot stability.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Agarwal, S., Mierle, K., et al.: Ceres solver. http://ceres-solver.org
Beck, C., Miró, J.V., Dissanayake, G.: Trajectory optimisation for increased stability of mobile robots operating in uneven terrains. In: IEEE ICCA, pp. 1913–1919 (2009)
Besseron, G., Grand, C., Amar, F.B., Bidaud, P.: Decoupled control of the high mobility robot hylos based on a dynamic stability margin. In: IEEE/RSJ IROS, pp. 2435–2440 (2008)
Grand, C., Benamar, F., Plumet, F., Bidaud, P.: Stability and traction optimization of a reconfigurable wheel-legged robot. Int. J. Rob. Res. 23(10–11), 1041–1058 (2004)
Kudruss, M., Manns, P., Kirches, C.: Efficient derivative evaluation for rigid-body dynamics based on recursive algorithms subject to kinematic and loop constraints. Optimization Online Preprint (2019). http://www.optimization-online.org
McGhee, R.B., Frank, A.A.: On the stability properties of quadruped creeping gaits. Math. Biosci. 3, 331–351 (1968)
Messuri, D., Klein, C.: Automatic body regulation for maintaining stability of a legged vehicle during rough-terrain locomotion. IEEE J-RA 1(3), 132–141 (1985)
Norouzi, M., Miro, J.V., Dissanayake, G.: Planning stable and efficient paths for reconfigurable robots on uneven terrain. J. Intell. Rob. Syst. 87(2), 291–312 (2017)
Ohno, K., Takeuchi, E., Chun, V., Tadokoro, S., Yuzawa, T., Yoshida, T., Koyanagi, E.: Rollover avoidance using a stability margin for a tracked vehicle with sub-tracks. In: IEEE SSRR, pp. 1–6 (2009)
Oleynikova, H., Taylor, Z., Fehr, M., Siegwart, R., Nieto, J.: Voxblox: incremental 3D euclidean signed distance fields for on-board MAV planning. In: IEEE/RSJ IROS (2017)
Papadopoulos, E., Rey, D.A.: The force-angle measure of tipover stability margin for mobile manipulators. Veh. Syst. Dyn. 33(1), 29–48 (2000)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Oehler, M., Kohlbrecher, S., von Stryk, O. (2020). Whole-Body Planning for Obstacle Traversal with Autonomous Mobile Ground Robots. In: Berns, K., Görges, D. (eds) Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980. Springer, Cham. https://doi.org/10.1007/978-3-030-19648-6_29
Download citation
DOI: https://doi.org/10.1007/978-3-030-19648-6_29
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-19647-9
Online ISBN: 978-3-030-19648-6
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)