Abstract
This paper investigates and compares crystalline silicon photovoltaic (PV) module performances for two distinct cases, part of a PV reliability project relating modes of degradation to climate data in Brazil. The selected installations provide the opportunity to directly evaluate and contrast the losses, reliability, and durability of modules operating for a long period (~15 years) for the same distributed power applications. The focus is on modules (a) from two installations, (b) operating under the same climate conditions, (c) with modules from two different manufacturers, (d) manufactured and installed at about the same time, but (e) with very different resulting observed changes in their operational and physical characteristics over their long field exposures. The PV modules were located in a tropical climate zones, at northern region of the state of Minas Gerais, Brazil. Visual inspections of the two module populations concluded that one set (Case A) had almost no encapsulant discoloration and few indications of delamination and corrosion. In contrast, the other set (Case B) had significant yellowing and browning, widespread areas of delamination, and fairly extensive interconnect corrosion regions. These visual observations correspond to the measured changes in the electrical characteristics, with those from the first set having an average annual loss in power of 0.4–0.5% while those modules from the second set having average annual power losses in the range 2.3–3.7% over their installation time. Encapsulant discoloration and delamination provided the first clues to the measured differences in module performance and can be attributed to the existing climate conditions of high incidence of high ultraviolet (UV) radiation and high ambient temperatures. The module-encapsulated degradation mechanisms have been analyzed and identified using complementary electrical, physical, and chemical characterization of the module components (encapsulated glass). Distinct differences between the two cases were established. The encapsulation browning (Case B) was followed by delamination and interconnect corrosion, and the associated chemical changes are reported. The causes for the differences between the two module types are identified based upon the critical module material properties and their long-term exposure under these climate conditions.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
TamizhMani G, Kuitche J (2012) A Literature Review and Analysis on: Accelerated Lifetime Testing of Photovoltaic Modules, Solar ABCs report
Michele CC de Oliveira (2018) PhD thesis, Universidade Federal de Minas Gerais (UFMG)
Jiang S, Wang K, Zhang H, Ding Y, Yu Q (2015) Encapsulation of PV modules using ethylene vinyl acetate copolymer as the encapsulant. Macromol React Eng 9:522–529
Charki A, Laronde R, Bigaud D (2013) Accelerated degradation testing of a photovoltaic module. J Photonics Energy 3:1–10
Oliveira MCC, Diniz ASAC, Viana MM, Lins VFC (2018) The causes and effects of degradation of encapsulant ethylene vinyl acetate copolymer (EVA) in crystalline silicon photovoltaic modules: a review. Renew Sustain Energy Rev 81:2299–2317
Czanderna AW, Pern FJ (1996) Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: a critical review. Sol Energy Mater Sol Cells 43:101–181
Peike L, Purschke C, Weiss KA, Köhl M, Kempe M (2013) Towards the origin of photochemical EVA discoloration. In: Proceedings of the 39th IEEE photovoltaic specialists conference (PVSC 39). IEEE-PVSC, Tampa, FL, pp 1579–1584
Klemchuk P, Erzin M, Lavigne G, Holley W, Galica J, Agro S (1997) Investigation of the degradation and stabilization of EVA-based encapsulant in field-aged solar energy modules. Polym Degrad Stab 55:347–364
Dunn L, Gostein M, Stueve B (2013) Literature review of the effects of UV exposure on PV modules. NREL PV Module Reliability Workshop
Kempe M (2010) Ultraviolet light test and evaluation methods for encapsulants of photovoltaic modules. Sol Energy Mater Sol Cells 94:246–253
Holley WH, Argo SC, Galica JP, Yorgensen RS (1996) UV stability and module testing of nonbrowning experimental PV encapsulants. In: Proceeding of 25th IEEE PVSC. IEEE, Washington, DC
Pern FJ (1997) Ethylene-vinyl acetate (EVA) encapsulants for photovoltaic modules: degradation and discoloration mechanisms and formulation modifications for improved photostability. Angew Makromol Chem 252:195–216
Jordan DC, Kurtz SR (2013) Photovoltaic degradation rates—an analytical review. Prog Photovolt 21:12–29
Wohlgemuth J (2012) Standards for PV modules and components—recent developments and challenges. NREL Report number: NREL/CP-5200-56531
Packard C, Wohlgemuth J, Kurtz S (2012) Development of a visual inspection data collection tool for evaluation of fielded PV module condition. National Renewable Energy Laboratory (Technical Report: NREL/TP-5200-56154)
Chattopadhyay S, Dubey R, Kuthanazhi V, Zachariah S, Bhaduri S, Mahapatra C, Rambabu S, Ansari F, Chindarkar A, Sinha A, Singh HK, Shiradkar N, Arora BM, Kottantharayil A, Narasimhan KL, Sabnis S, Vasi J (2016) All-India Survey of photovoltaic module reliability: 2016, National Center for Photovoltaic Research and Education (NCPRE). IIT Bombay and National Institute for Solar Energy (NISE), Mumbai, Gurugram. http://www.ncpre.iitb.ac.in/research/pdf/All_India_Survey_of_Photovoltaic_Module_Reliability_2016.pdf
Kottek M, Grieser J, Beck C, Rudolf B, Rubel F (2006) World map of the Köppen-Geiger climate classification updated. Meteorol Z 15(3):259–263
ATLAS SOLARIMÉTRICO DE MINAS GERAIS. Belo Horizonte. Companhia Energética de Minas Gerais (CEMIG) (2012). http://www.cemig.com.br/pt-br/A_Cemig_e_o_Futuro/inovacao/Alternativas_Energeticas/Documents/Atlas_Solarimetrico_CEMIG_12_09_menor.pdf
Francisco Hering Alves de Freitas Souza, Inspeção e Monitoramento do Desempenho de Sistemas Fotovoltaicos Conectados a Rede Elétrica: Estudo de Caso Real (2014) Master thesis, Pontificia Universidade Catolica de Minas Gerais, Programa de Pós-Graduação em Engenharia Mecânica, Minas Gerais
Diniz ASAC, Lauro VBMN, Camara CF, Morais P, Cabral CVT, Filho DO, Ravinetti RF, França ED, Cassini DA, Souza MEM, Santos JH, Amorim M (2011) Review of the photovoltaic energy program in the state of Minas Gerais, Brazil. Renew Sustain Energy Rev 15:2696–2706
ASSOSSIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS, ABNT NBR–15572:2013—Ensaios não destrutivos—Termografia Guia para inspeção de equipamentos elétricos e mecânicos (2013)
ASSOSSIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS, ABNT NBR–15866:2010. Ensaio não destrutivo—Termografia—Metodologia de avaliação de temperatura de trabalho de equipamentos em sistemas elétricos
Ali S, Ali A, Saher S, Saif Agha H, Majeed H b A, Mahmood FI, TalizhMani G (2018) A comprehensive study of 18–19 years field aged modules, for degradation rate determination along with defect detection and analysis using IR, EL, UV. In: Proceeding of 5th International Bhurban Conference on Applied Sciences and Technology (IBCAST). IEEE, New York. Also, Personal Communication with A.S.A.C. Diniz (2017)
Jin J, Chen S, Zhang J (2010) UV-aging behaviour of ethylene-vinyl acetate copolymers (EVA) with different vinyl acetate contents. Polym Degrad Stab 95(5):725–732
Gagliardi M, Lenarda P, Paggi M (2017) A reaction-diffusion formulation to simulate EVA polymer degradation in environmental and accelerated ageing conditions. Sol Energy Mater Sol Cells 164:93–106
Sinha A, Sastry OS, Gupta R (2016) Nondestructive characterization of encapsulant discoloration effects in crystalline-silicon PV modules. Sol Energy Mater Sol Cells 155:234–242
Igor Alessandro Silva Carvalho, Preparação estudo da fotodegradação de compósitos de matriz polimérica para encapsulamento de módulo fotovoltaico (2007) Master thesis, Pós-Graduação em Engenharia de Materiais da REDEMAT, Minas Gerais
Kojima T, Yanagisawa T (2005) Ultraviolet-ray irradiation and degradation evaluation of the sealing agent EVA film for solar cells under high temperature and humidity. Sol Energy Mater Sol Cells 85:63–72
Jin J, Chen S, Zhang J (2010) Investigation of UV aging influences on the crystallization of ethylene-vinyl acetate copolymer via successive self-nucleation and annealing treatment. J Poly Res 17:827–836
Acknowledgments
The authors would like to thank the Energetic Company of Minas Gerais (CEMIG-D), University of São Paulo (USP), and Pontifical Catholic University of Minas Gerais (PUCMINAS) for their support for the development of this project. Also, our team would like to thank FAPEMIG and CNPq for the financial support and guidance. We also gratefully acknowledge the help and inputs of the entire GREEN technical team.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Diniz, A.S.A.C. et al. (2020). Evaluation of Performance Losses and Degradation of Aged Crystalline Si Photovoltaic Modules Installed in Minas Gerais (Brazil). In: Sayigh, A. (eds) Renewable Energy and Sustainable Buildings. Innovative Renewable Energy. Springer, Cham. https://doi.org/10.1007/978-3-030-18488-9_4
Download citation
DOI: https://doi.org/10.1007/978-3-030-18488-9_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-18487-2
Online ISBN: 978-3-030-18488-9
eBook Packages: EnergyEnergy (R0)