Abstract
The actual status of metrology infrastructure of B&H on the state level and possibilities for improvement in future was discussed in this paper. The Institute of Metrology of Bosnia and Herzegovina (IMBiH) is a Government authority on the state level performing the functions of conformity assessment. Institute also has a role in harmonization of B&H legislation with the EC Directives. Since 2009. IMBiH has been full member of the European Association of National Metrology Institutes (EURAMET). Basic adopted laws in force on metrology in B&H are Law of metrology as well as Law on Measurement Units. The metrology system in B&H is highly decentralized, with a lack of correspondence between different levels of authorities. Accredited laboratories and other laboratories occupied with length measurement make their own traceability chain using laboratories in region and without inclusion of IMBiH. Laboratory for length in IMBiH is responsible for the realization and maintenance of the National Standard for Length and transferring unit of the length to lower rank standards and calibration of measuring instruments. Unit of length, in the Laboratory for length is realized through Iodine stabilized He-Ne laser of wavelength 633 nm. The laser is realized according to the definition of meter, i.e. according to the requirements of the International Recommendation for Practical Realization of the meter (CIMP 1997/2001 ‘Mise en pratique’). This laser can be used for calibration of other lasers with wavelength of 633 nm including laser interferometers for length measurements.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Aganovic, A.: Organization and quality system management of the national metrology institute in respect with international requirements and national metrology infrastructure. Master thesis, University of Zenica (2013). (in Bosnian)
Seferović, E., Bašić, H.: Metrology and measuring results data analysis. Mechanical Engineering Faculty Sarajevo, Sarajevo (2005). (in Bosnian)
Softic, A.: Traceability of unit of the length research using circular intercomparation. Ph.D. thesis, University of Sarajevo (2014). (in Bosnian)
http://www.met.gov.ba. Accessed 20 Feb 2019
Bosnjakovic, A.: Measuring uncertainty calculation of iodine stabilized He-Ne laser with wavelength at 633 nm. Master thesis, University of Sarajevo, Sarajevo (2013). (in Bosnian)
http://www.mirs.si. Accessed 16 Feb 2019
http://www.bata.gov.ba. Accessed 15 Jan 2019
Group of Authors: Measurements in theory and practice. In: PoMaCoM, Proceedings. University of Zenica, Zenica (2007)
http://www.dmdm.rs. Accessed 10 Feb 2019
http://www.bipm.fr. Accessed 20 Feb 2019
http://kcdb.bipm.org/. Accessed 17 Feb 2019
Bošnjaković, A., Bašić, H.: The method of calibration of He-Ne laser using the NPL iodine stabilized He-Ne laser with wavelength at 633 nm. In: 18th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology – TMT 2014, Budapest, Hungary, pp. 293–296 (2014). ISSN 1840-4944
Softić, A., Zaimovic-Uzunović, N., Bašić, H.: Proficiency testing and interlaboratory comparisons in laboratory for dimensional measurement. J. Trends Dev. Mach. Assoc. Technol. 16(1), 115–118 (2012)
Bašić, H., Softić, A.: Metrology infrastructure of Bosnia and Herzegovina in the context of European integration. In: IN-TECH 2017, International Conference on Innovative Technologies, Ljubljana, Slovenia, pp. 145–148 (2017)
Bašić, H., Softić, A.: The proficiency testing analyses for dimensional laboratories using the gauge blocks. In: 19th International Research/Expert Conference ‘Trends in the Development of Machinery and Associated Technology – TMT 2015, Barcelona, Spain, pp. 369–372 (2015). ISSN 1840-4944
Softić, A., Bašić, H., Zaimović-Uzunović, N.: Implementation methodology scheme for proficiency testing in length measurement. In: 9 Research/Expert Conference with International participation, QUALITY 2015, Neum, B&H, pp. 195–200 (2015). ISSN 1512-9268
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Softić, A., Bašić, H., Lemeš, S., Zaimović-Uzunović, N. (2019). Research of Traceability of Unit of Length in Metrology System of Bosnia and Herzegovina. In: Majstorovic, V., Durakbasa, N. (eds) Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue. IMEKOTC14 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-18177-2_9
Download citation
DOI: https://doi.org/10.1007/978-3-030-18177-2_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-18176-5
Online ISBN: 978-3-030-18177-2
eBook Packages: EngineeringEngineering (R0)