nonreach – A Tool for Nonreachability Analysis
 1 Citations
 5.2k Downloads
Abstract
We introduce nonreach, an automated tool for nonreachability analysis that is intended as a dropin addition to existing termination and confluence tools for term rewriting. Our preliminary experimental data suggests that nonreach can improve the performance of existing termination tools.
Keywords
Term rewriting Nonreachability analysis Narrowing Termination Confluence Infeasibility1 Introduction
Nonreachability analysis is an important part of automated tools like Open image in new window [1] (for proving termination of rewrite systems) and ConCon [2] (for proving confluence of conditional rewrite systems). Many similar systems compete against each other in the annual termination (TermComp)^{1} and confluence (CoCo)^{2} competitions, both of which will run as part of TACAS’s TOOLympics^{3} in 2019.
Our intention for nonreach is to become a valuable component of all of the above mentioned tools by providing a fast and powerful back end for reachability analysis. This kind of analysis is illustrated by the following example.
Example 1
For checking termination we have to make sure that there is no infinite sequence of recursive calls. One specific subproblem for doing so is to check whether it is possible to reach Open image in new window ^{4} from Open image in new window for arbitrary instantiations of the variables Open image in new window , Open image in new window , Open image in new window , and Open image in new window . In other words, we have to check nonreachability of the target t from the source s.
In the remainder we will: comment on the role we intend for nonreach (Sect. 2), describe how nonreach is built and used (Sect. 3), give an overview of the techniques that went into nonreach (Sect. 4), and finally provide some experimental data (Sect. 5).
2 Role
When looking into implementations of current termination and confluence tools it soon becomes apparent that many tools use the same techniques for proving nonreachability. In light of this observation, one of our main goals for nonreach was to provide a dedicated standalone tool for nonreachability that can be reused for example in termination and confluence tools and can in principle replace many existing implementations.
In order to make such a reuse desirable for authors of other tools two things are important: (1) we have to provide a simple but efficient interface, and (2) we should support all existing techniques that can be implemented efficiently.^{5}
At the time of writing, we already successfully use nonreach as back end in the termination tool Open image in new window [1]. To this end, we incorporated support for external nonreachability tools into Open image in new window , with interaction purely via standard input and output. More specifically, while at the moment only YES/NO/MAYBE answers are required, the interface is general enough to support more detailed certificates corroborating such answers. The external tool is launched once per termination proof and supplied with those nonreachability problems that could not be handled by the existing techniques of Open image in new window . Our next goal is to achieve the same for the confluence tool ConCon [2].
Furthermore, a new infeasibility category will be part of CoCo 2019.^{6} Infeasibility is a concept from conditional term rewriting but can be seen as a variant of nonreachability [3]. Thus, we plan to enter the competition with nonreach.
Another potential application of nonreach is dead code detection or showing that some error can never occur.
3 Installation and Usage
Usage. The execution of nonreach is controlled by several command line flags. The only mandatory part is a rewrite system (with respect to which nonreachability should be checked). This may be passed either as literal string (flag Open image in new window ) or as file (flag Open image in new window ). Either way, the input follows the formats for (conditional) rewrite systems that are used for TermComp and CoCo.

We can provide whitespaceseparated lists of problems either literally on the command line (flag Open image in new window ) or through a file (flag Open image in new window ).

Alternatively, a single infeasibility problem can be provided as part of the input rewrite system as specified by the new infeasibility category of CoCo 2019.

Otherwise, nonreach waits for individual problems on standard input.
For each given problem nonreach produces one line of output: In its default mode the output is NO whenever nonreachability can be established and either MAYBE or TIMEOUT, otherwise. When given an infeasibility problem, the output is YES if the problem is infeasible and either MAYBE or TIMEOUT, otherwise.
Further flags may be used to specify a timeout (in microseconds; flag Open image in new window ) or to give finer control over the individual techniques that are implemented in nonreach (we will mention those in Sect. 4).
It is high time for an example. Let us check Example 1 using nonreach.
Example 2
4 Design and Techniques
In this section we give a short overview of the general design decisions and specific nonreachability techniques that went into nonreach.
Design. Efficiency was at the heart of our concern. On the one hand, from a userinterface perspective, this was the reason to provide the possibility that a single invocation of nonreach for a fixed TRS can work on arbitrarily many reachability problems. On the other hand, this lead us to mostly concentrate on techniques that are known to be fast in practice. The selection of techniques we present below (with the exception of narrowing) satisfies this criterion.
Techniques. Roughly speaking, nonreach uses two different kinds of techniques: (1) transformations that result in disjunctions or conjunctions of easier nonreachability problems, and (2) actual nonreachability checks. We use the notation \(s \twoheadrightarrow t\) for a nonreachability problem with source s and target t.
Reachability checks. The first check we recapitulate is implemented by most termination tools and based on the idea of computing the topmost part of a term that does not change under rewriting (its cap) [4]. If the cap of the source s does not unify with the target t, then there are no substitutions \(\sigma \) and \(\tau \) such that \(s\sigma \rightarrow ^* t\tau \). There are different algorithms to underapproximate such caps. We use \(\mathsf {etcap}\), developed by Thiemann together with the second author [5], due to its linear time complexity (by reducing unification to ground context matching) but nevertheless simple implementation. With \(\mathsf {etcap}\) subterms are matched bottomup with lefthand sides of rules. In case of a match, the corresponding subterm is potentially rewritable and thus replaced by a hole, written \(\square \), representing a fresh variable. We illustrate \(\mathsf {etcap}\) on the first two (addition) rules of Example 1.
Example 3
The second reachability check implemented in nonreach [3, 6] is based on the so called symbol transition graph (SG for short) of a TRS. Here, the basic idea is to build a graph that encodes the dependencies between root symbols induced by the rules of a TRS. This is illustrated by the following example:
Example 4
For each rule we generate an edge from the node representing the root symbol of the lefthand side to the node representing the root symbol of the righthand side. Since in the last rule, the righthand side is a variable (which can in principle be turned into an arbitrary term by applying a substitution), we have to add edges from Open image in new window to all nodes (including Open image in new window itself).
From the graph it is apparent that Open image in new window is not reachable from Open image in new window , no matter the substitutions for Open image in new window , Open image in new window and Open image in new window , since there is no path from Open image in new window to Open image in new window .
Transformations. We call the first of our transformations (problem) decomposition. This technique relies on rootreachability checks to decompose a problem into a conjunction of strictly smaller subproblems. Thus, we are done if any of these subproblems is nonreachable.
Decomposition of a problem \(s \twoheadrightarrow t\) only works if source and target are of the form \(s = f(s_1,\dots ,s_n)\) and \(t = f(t_1,\dots ,t_n)\), respectively. Now the question is whether t can be reached from s involving at least one rootrewrite step. If this is not possible, we know that for reachability from s to t, we need all \(t_i\) to be reachable from the corresponding \(s_i\).
If at least one of these checks returns Open image in new window , we can decompose the initial problem \(s \twoheadrightarrow t\) into a conjunction of problems \(s_1 \twoheadrightarrow t_1\), ..., \(s_n \twoheadrightarrow t_n\).
The second transformation is based on narrowing. Without going into too much technical detail let us start from the following consideration. Given a reachability problem \(s \twoheadrightarrow t\), assume that t is reachable from s. Then either the corresponding rewrite sequence is empty (in which case s and t are unifiable) or there is at least one initial rewrite step. Narrowing is the tool that allows us to capture all possible first steps (one for each rule \(l \rightarrow r\) and each subterm of s that unifies with l), of the form \(s \rightarrow s_i \rightarrow ^* t\). This idea is captured in Fig. 1(b).
Now, decomposition (which is always applicable and thus has to be handled with care), transforms a given reachability problem \(s \twoheadrightarrow t\) into a disjunction of new problems (that is, this time we have to show Open image in new window for all of these problems in order to conclude Open image in new window for the initial one) \(s {\mathop {\sim }\limits ^{\smash {?}}} t\) or \(s_1 \twoheadrightarrow t\) or ...or \(s_k \twoheadrightarrow t\), where the first one is a unifiability problem and the remaining ones are again reachability problems.
The maximal number of narrowing applications is specified by the Open image in new window flag.
5 Experiments
In order to obtain test data for nonreach we started from the Termination Problem Data Base (TPDB, for short),^{9} the data base of problems that are used also in TermComp. Then we used a patched version of the termination tool Open image in new window to obtain roughly 20,000 nontrivial reachability problems with respect to 730 TRSs. These are available from a public bitbucket repository^{10} alongside a small script, that runs nonreach on all the problems and displays the overall results. All these problems could, at the time of creating the dataset, not be solved with the reachability checks used in the competition strategy of Open image in new window . The current version^{11} of nonreach in its default configuration can prove nonreachability of 369 problems of this set. While this does not seem much, we strongly suspect that the majority of problems in our set are actually reachable.
Footnotes
 1.
 2.
 3.
 4.
We differentiate between recursive calls and normal argument evaluation by capitalization of function symbols.
 5.
Efficiency is especially important under the consideration that, for example, termination tools may sometimes have to check thousands of nonreachability problems within a single termination proof.
 6.
 7.
 8.
 9.
 10.
 11.
References
 1.Korp, M., Sternagel, C., Zankl, H., Middeldorp, A.: Tyrolean termination tool 2. In: Treinen, R. (ed.) RTA 2009. LNCS, vol. 5595, pp. 295–304. Springer, Heidelberg (2009). https://doi.org/10.1007/9783642023484_21CrossRefGoogle Scholar
 2.Sternagel, T., Middeldorp, A.: Conditional confluence (system description). In: Dowek, G. (ed.) RTA 2014. LNCS, vol. 8560, pp. 456–465. Springer, Cham (2014). https://doi.org/10.1007/9783319089188_31CrossRefGoogle Scholar
 3.Sternagel, C., Yamada, A.: Reachability analysis for termination and confluence of rewriting. In: Vojnar, T., Zhang, L. (eds.) TACAS 2019. LNCS, vol. 11427, pp. 262–278 (2019)CrossRefGoogle Scholar
 4.Giesl, J., Thiemann, R., SchneiderKamp, P.: Proving and disproving termination of higherorder functions. In: Gramlich, B. (ed.) FroCoS 2005. LNCS (LNAI), vol. 3717, pp. 216–231. Springer, Heidelberg (2005). https://doi.org/10.1007/11559306_12CrossRefzbMATHGoogle Scholar
 5.Thiemann, R., Sternagel, C.: Certification of termination proofs using CeTA. In: Berghofer, S., Nipkow, T., Urban, C., Wenzel, M. (eds.) TPHOLs 2009. LNCS, vol. 5674, pp. 452–468. Springer, Heidelberg (2009). https://doi.org/10.1007/9783642033599_31CrossRefGoogle Scholar
 6.Yamada, A.: Reachability for termination. In: 4th AJSW (2016). http://clinformatik.uibk.ac.at/users/ayamada/AJSW2016slides.pdf
Copyright information
Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.
The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.