Abstract
This document describes estimation and approximation process of bearings Remaining Useful Life from 2012 Data Challenge. Data were received with the help of PRONOSTIA Platform, constructed for the needs of IEEE Data Challenge. This paper shows different methods of data processing to approximate Remaining Useful Life, which is very important in industries and it is the main part of maintenance. Tests were made on learning set provided by Data Challenge. Raw Data were extracted, filtered and analyzed using algorithms implemented in Matlab. During tests there were used kurtosis, root mean square algorithms and moving average, which helped to process data to be useful for next tests. Remaining useful life was approximated using exponential fitting and different length of original data. Process of analysis boils down to determine at what point it is possible to correctly determinate the bearing remaining useful life.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Zhirabok, A., Shumsky, A.: Fault diagnosis in nonlinear hybrid systems. Int. J. Appl. Math. Comput. Sci. 28(4), 635–648 (2008). https://doi.org/10.2478/amcs-2018-0049
Bole, M.B.: Load allocation for optimal risk management in systems with incipient failure modes. Georgia Institute of Technology, Zielona Góora (2013)
Kundu, P., Chopra, S., Lad, B.K.: Multiple failure behaviors identification and remaining useful life prediction of ball bearings. J. Intell. Manufact. (2017). ISSN: 1572-8145. https://doi.org/10.1007/s10845-017-1357-8
Loutas, H.T., Roulias, D., Geogoulos, G.: Remaining useful life estimation in rolling bearings utilizing data-driven probabilistic E-support vectors regression. IEEE Trans. Reliab. 62(4), 821–832 (2013). https://doi.org/10.1109/TR.2013.2285318
Miao, Q., et al.: Remaining useful life prediction of lithium-ion battery with unscented particle filter technique. Microelectron. Reliab. 53(6), 805–810 (2012). https://doi.org/10.1016/j.microrel.2012.12.004
Gouriveau Nectoux, P.R., et al.: PRONOSTIA: an experimental platform for bearings accelerated life test. In: IEEE International Conference on Prognostics and Health Management, Denver, CO, USA (2012)
Saha, B., et al.: Prognostics methods for battery health monitoring using a bayesian framework. IEEE Trans. Instrum. Meas. 58(2), 291–296 (2009). https://doi.org/10.1109/TIM.2008.2005965
Si, X.-S., et al.: Remaining useful life estimation - a review on the statistical data driven approaches. Eur. J. Oper. Res. 213(1), 1–14 (2011). https://doi.org/10.1016/j.ejor.2010.11.018
Sikorska, J., et al.: A collaborative data library for testing prognostic models. In: Third European Conference of the Prognostics and Health Management Society 2016 (2016)
Singleton, K.R., et al.: Extended Kalman filtering for remaining-useful-life estimation of bearings. IEEE Trans. Ind. Electron. 62(3), 1781–1790 (2015). https://doi.org/10.1016/j.microrel.2012.12.004
Sutrisno, E., Oh, H., Vasan, A.S.S.: Estimation of remaining useful life of ball bearings using data driven methodologies. In: 2012 IEEE Conference on Prognostics and Health Management (PHM) (2012). https://doi.org/10.1109/ICPHM.2012.6299548
Tian, Z., et al.: Condition based maintenance optimization for wind power generation systems under continuous monitoring. Renewable Energy 36(5), 1502–1509 (2011). https://doi.org/10.1016/j.renene.2010.10.028
Simani, S., Farsoni, S., Castaldi, P.: Data-driven techniques for the fault diagnosis of a wind turbine benchmark. Int. J. Appl. Math. Comput. Sci. 28(2), 247–268 (2008). https://doi.org/10.2478/amcs-2018-0018
Acknowledgements
The work was supported by the National Science Centre, Poland under Grant: UMO-2017/27/B/ST7/00620.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Lipiec, B., Witczak, M. (2020). A Diagnostic System for Remaining Useful Life of Ball Bearings. In: Szewczyk, R., Zieliński, C., Kaliczyńska, M. (eds) Automation 2019. AUTOMATION 2019. Advances in Intelligent Systems and Computing, vol 920. Springer, Cham. https://doi.org/10.1007/978-3-030-13273-6_13
Download citation
DOI: https://doi.org/10.1007/978-3-030-13273-6_13
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-13272-9
Online ISBN: 978-3-030-13273-6
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)