Skip to main content
SpringerLink
Log in

Effect of Ultrasonication on the Solidification Microstructure in Al and Mg-Alloys

  • Conference paper
  • First Online:
Light Metals 2019

Part of the book series: The Minerals, Metals & Materials Series ((MMMS))

Abstract

Solidification microstructures formed under high-intensity ultrasonication are systematically investigated in various Al and Mg-alloys. The range of microstructures examined include primary grain structure, intermetallic compounds (IMCs), regular and irregular eutectics. Extensive grain refinement is observed in all alloys, especially in the areas of cavitation, further facilitated by the presence of solute. Heat treatability of the ultrasonicated alloys is enhanced as the fine-grained microstructure reduced diffusion distance. Regular lamellar eutectic microstructure is observed to degenerate under cavitation. Irregular eutectic and IMCs are modified from coarse plates or complex morphology into compact polygonal shape. Result suggests that ultrasonication increases nucleating particles and potency of nucleants. The modification of eutectic and IMCs predominantly occurs through coarsening and spheroidisation in the area of intense cavitation. While grain refinement effect is noticed in the entire ingots assisted by acoustic streaming, eutectic modification effect dissipates rapidly outside the area of cavitation.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 299.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Hardcover Book
USD 449.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others

References

  1. Spittle JA (2006) Columnar to equiaxed grain transition in as solidified alloys. Int. Mater. Rev. 51(4):247–269. https://doi.org/10.1179/174328006x102493.

  2. Murty BS, Kori SA, Chakraborty M (2002) Grain refinement of aluminium and its alloys by heterogeneous nucleation and alloying. Int. Mater. Rev. 47(1):3–29. https://doi.org/10.1179/095066001225001049.

  3. Greer AL, Cooper PS, Meredith MW, Schneider W, Schumacher P, Spittle JA, Tronche A (2003) Grain refinement of aluminium alloys by inoculation, Adv. Eng. Mater. 5(1–2):81–91. https://doi.org/10.1002/adem.200390013.

  4. Qian M, StJohn DH, Frost MT (2004) Heterogeneous nuclei size in magnesium–zirconium alloys. Scr. Mater. 50(8):1115–1119. https://doi.org/10.1016/j.scriptamat.2004.01.026.

  5. Ali Y, Qiu D, Jiang B, Pan F, Zhang MX (2015) Current research progress in grain refinement of cast magnesium alloys: a review article. J. Alloys Compd. 619:639–651. https://doi.org/10.1016/j.jallcom.2014.09.061.

  6. Lu SZ, Hellawell A (1995) Modification of Al-Si alloys: Microstructure, thermal analysis, and mechanisms. JOM 47(2):38–40. https://doi.org/10.1007/bf03221405.

  7. Easton MA, Qian M, Prasad A, StJohn DH (2016) Recent advances in grain refinement of light metals and alloys. Curr. Opin. Solid State Mater. Sci. 20(1):13–24. https://doi.org/10.1016/j.cossms.2015.10.001.

  8. Das A, Liu G, Fan Z (2006) Investigation on the microstructural refinement of an Mg-6wt.% Zn alloy. Mater. Sci. Eng. A419:349–356. https://doi.org/10.1016/j.msea.2006.01.023.

  9. Vives C (1989) Electromagnetic refining of aluminum alloys by the CREM process: Part I. Working principle and metallurgical results. Metall. Trans. B. 20(5):623–629. https://doi.org/10.1007/bf02655919.

  10. Räbiger D, Zhang Y, Galindo V, Franke S, Willers B, Eckert S (2014) The relevance of melt convection to grain refinement in Al–Si alloys solidified under the impact of electric currents. Acta Mater. 79:327–338. https://doi.org/10.1016/j.actamat.2014.07.037.

  11. Eskin GI, Eskin DG (2015) Ultrasonic treatment of light alloy melts, 2nd Ed. CRC Press, Boca Raton.

    Google Scholar 

  12. Kotadia HR, Qian M, Eskin DG, Das A (2017) On the microstructural refinement in commercial purity Al and Al-10wt% Cu alloy under ultrasonication during solidification. Mater. Des. 132:266–274. https://doi.org/10.1016/j.matdes.2017.06.065.

  13. Atamanenko TV, Eskin DG, Zhang L, Katgerman L (2010) Criteria of grain refinement induced by ultrasonic melt treatment of aluminum alloys containing Zr and Ti. Metall. Mater. Trans. A. 41 (8), 2056–2066. https://doi.org/10.1007/s11661-010-0232-4.

  14. Wang G, Dargusch MS, Qian M, Eskin DG, StJohn DH (2014) The role of ultrasonic treatment in refining the as-cast grain structure during the solidification of an Al–2Cu alloy. J. Cry. Growth 408, 119–124. https://doi.org/10.1016/j.jcrysgro.2014.09.018.

  15. Qian M, Ramirez A, Das A (2009) Ultrasonic refinement of magnesium by cavitation: clarifying the role of wall crystals. J. Cryst. Growth. 311(14):3708–3715. https://doi.org/10.1016/j.jcrysgro.2009.04.036.

  16. Liu X, Osawa Y, Takamori S, Mukai T (2008) Grain refinement of AZ91 alloy by introducing ultrasonic vibration during solidification. Mater. Lett. 62 (17–18), 2872–2875. https://doi.org/10.1016/j.matlet.2008.01.063.

  17. D Gao, Z Li, Q Han, Q Zhai (2009) Effect of ultrasonic power on microstructure and mechanical properties of AZ91 alloy, Mat. Sci. Eng. A, 502 (1–2) 2–5. https://doi.org/10.1016/j.msea.2008.12.005.

  18. Das A, Kotadia HR (2011) Effect of high-intensity ultrasonic irradiation on the modification of solidification microstructure in a Si-rich hypoeutectic Al–Si alloy. Mater. Chem. Phys. 125(3):853–859. https://doi.org/10.1016/j.matchemphys.2010.09.035.

  19. Abramov V, Abramov O, Bulgakov V, Sommer F (1998) Solidification of aluminium alloys under ultrasonic irradiation using water-cooled resonator, Mater. Lett. 37 (1–2), 27-34. https://doi.org/10.1016/s0167-577x(98)00064-0.

  20. St John DH, Qian M, Easton MA, Cao P, Hildebrand Z (2005) Grain refinement of magnesium alloys. Metall. Mater. Trans. A. 36(7):1669–1679. https://doi.org/10.1007/s11661-005-0030-6.

  21. Hunt JD, Jackson KA (1966) Nucleation of Solid in an undercooled liquid by cavitation. J. Appl. Phys. 37(1):254–257. https://doi.org/10.1063/1.1707821.

  22. Yu S, Gao Y, Liu C, Han X (2015) Effect of aging temperature on precipitation behavior and mechanical properties of extruded AZ80-Ag alloy. J. Alloys Comp. 646:431–436. https://doi.org/10.1016/j.jallcom.2015.06.126.

  23. Bradai D, Kadi-Hanifi M, Zieba P, Kuschke WM, Gust W (1999) The kinetics of the discontinuous precipitation and dissolution in Mg-rich Al alloys. J. Mater. Sci. 34:5331–5336. https://doi.org/10.1023/a:1004753122411.

Download references

Acknowledgements

Dr. Hiren Kotadia thanks the support of WMG—High Value Manufacturing Catapult.

Author information

Authors and Affiliations

  1. College of Engineering, Swansea University, Bay Campus, Swansea, SA1 8EN, UK

    X. Zhang, J. Depner & A. Das

  2. Warwick Manufacturing Group, University of Warwick, Coventry, CV4 7AL, UK

    H. R. Kotadia

  3. Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, Australia

    M. Qian

Authors
  1. X. Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. H. R. Kotadia
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. J. Depner
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. M. Qian
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. A. Das
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to A. Das .

Editor information

Editors and Affiliations

  1. Metal Quality Solutions, LLC, Avonmore, PA, USA

    Corleen Chesonis

Rights and permissions

Reprints and permissions

Copyright information

© 2019 The Minerals, Metals & Materials Society

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Zhang, X., Kotadia, H.R., Depner, J., Qian, M., Das, A. (2019). Effect of Ultrasonication on the Solidification Microstructure in Al and Mg-Alloys. In: Chesonis, C. (eds) Light Metals 2019. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-030-05864-7_201

Download citation

Publish with us

Policies and ethics

Search

Navigation