Skip to main content

Material Characterization Based on Deep Rolling Utilizing Process Dependent Descriptors

  • Conference paper
  • First Online:
Advances in Production Research (WGP 2018)

Included in the following conference series:

  • 2950 Accesses


Deep rolling is widely applied to plastically deform specimens. The resulting plastic deformation depends on the process parameters and on the material properties of the deformed parts. As the material properties depend e.g. on the microstructure, within this work deep rolling is used to gain information about the influence of the microstructure on the plastic deformation. Therefore, fast and easily determinable material-specific variables, so called descriptors, are determined. The examination of macro samples with different heat treatments shows an influence of the workpiece hardness and a smaller change due to the different microstructures. Considering equivalent stresses, a process parameter independent analysis was performed. The descriptors determined for macro and additionally processed micro samples showed a progressive trend, which is why a scaling from macro to micro descriptors within the framework of subsequent work is conceivable.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
USD 129.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Hardcover Book
USD 169.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others


  1. Yang, K.H.: Material laws and properties. In: Basic Finite Element Method as Applied to Injury Biomechanics, pp. 231–256 (2017)

    Chapter  Google Scholar 

  2. Holmes, M.: Aerospace looks to composites for solutions. Reinf. Plast. 61(4), 237–241 (2017)

    Article  MathSciNet  Google Scholar 

  3. Macherauch, E., Zoch, H.: Praktikum in Werkstoffkunde, 11th edn. Vieweg+Teubner Verlag/Springer Fachmedien Wiesbaden GmbH Wiesbaden, Wiesbaden (2011)

    Google Scholar 

  4. Thelning, K.E. (ed.): Steel and Its Heat Treatment. Butterworth-Heinemann, Oxford (2013)

    Google Scholar 

  5. Mädler, L.: Is High-throughput screening for structural materials/metals possible? In: Proceedings of the 4th International Conference on Nanomanufacturing (2014)

    Google Scholar 

  6. Ellendt, N., Mädler, L.: High-troughput exploration of evolutionary structural materials. HTM, 175–186 (2018)

    Google Scholar 

  7. Schulze, V.: Modern mechanical surface treatment: states, stability, effects, Zugl.: Karlsruhe, Univ., Habil.-Schr., 2004, vol. 1. Wiley-VCH Verl., Weinheim (2006)

    Google Scholar 

  8. Meyer, D., Kämmler, J.: Surface integrity of AISI 4140 after deep rolling with varied external and internal loads. Procedia CIRP 45, 363–366 (2016)

    Article  Google Scholar 

  9. Hertz, H.: Ueber die Berührung fester elastischer Körper. Journal für die reine und angewandte Mathematik (Crelle’s Journal) 1882(92) (1881)

    Google Scholar 

  10. Czichos, H., Hennecke, M. (eds.): HÜTTE - Das Ingenieurwissen, 32., aktualisierte Auflage ed. Springer, Heidelberg (2012)

    Google Scholar 

  11. Ellendt, N., Ciftci, N., Goodreau, C., Uhlenwinkel, V., Mädler, L.: Solidification of single droplets under combined cooling conditions. In: IOP Conference Series: Materials Science and Engineering, vol. 117, p. 12057 (2016)

    Article  Google Scholar 

  12. Röttger, K.: Walzen hartgedrehter Oberflächen, Shaker, Aachen, XI, 154, 6 S. (2003)

    Google Scholar 

  13. Information on:

Download references


Financial support of the subproject U04 ‘Mechanical Treatment’ of the Collaborative Research Center SFB 1232 “Farbige Zustände” by the German Research Foundation (DFG) is gratefully acknowledged.

Author information

Authors and Affiliations


Corresponding author

Correspondence to Nicole Wielki .

Editor information

Editors and Affiliations

Rights and permissions

Reprints and permissions

Copyright information

© 2019 Springer Nature Switzerland AG

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Wielki, N., Kämmler, J., Guba, N., Meyer, D. (2019). Material Characterization Based on Deep Rolling Utilizing Process Dependent Descriptors. In: Schmitt, R., Schuh, G. (eds) Advances in Production Research. WGP 2018. Springer, Cham.

Download citation

  • DOI:

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-030-03450-4

  • Online ISBN: 978-3-030-03451-1

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics