Abstract
This paper presents the simulation analysis of three dimensional circular embedded patch antenna mounted on coaxial cable for wideband applications. The proposed antenna design is constructed from taking a basic square substrate with ground at lower side which is fed by a cylindrical strip coaxial cable feed line satisfying the 50 Ω requirement. Two vertically symmetrical cylinder of equal diameter with perpendicular to each other are mounted on feed line; which acts as a radiator. High Frequency Structure Simulator (HFSS) is used to analyze the critical parameters and simulation results on the reflection coefficient/return loss, VSWR (voltage standing wave ratio), H-plane, E-plane, gain and radiation pattern of the proposed antenna at various frequencies. The antenna has ability to achieve the frequency range of 3.3–30 GHz along with 160%, 9.09:1 fractional bandwidth and bandwidth ratio (BWR), respectively.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Lau, K.-L., Li, P., Luk, K.-M.: A monopolar patch antenna with very wide impedance bandwidth. IEEE Trans. Antennas Propag. 53, 1004–1010 (2005)
Lau, K.L., Kong, K.C., Luk, K.M.: Super-wideband monopolar patch antenna. Electron. Lett. 44, 716–718 (2008)
Zuo, S.L., Yin, Y.Z., Zhang, Z.Y., Song, K.: Enhanced bandwidth of low-profile sleeve monopole antenna for indoor base station application. Electron. Lett. 46, 1587–1588 (2010)
Zhang, Z.-Y., Fu, G., Gong, S.-X., Zuo, S.-L., Lu, Q.-Y.: Sleeve monopole antenna for DVB-H applications. Electron. Lett. 46, 879–880 (2010)
Amert, A.K., Whites, K.W.: Miniaturization of the biconical antenna for ultrawideband applications. IEEE Trans. Antennas Propag. 57, 3728–3735 (2009)
Aten, D.W., Haupt, R.L.: A wideband, low profile, shorted top hat monocone antenna. IEEE Trans. Antennas Propag. 60, 4485–4491 (2012)
Nadeem, I., Kim, Y.J.: Design of ultra-wide band antenna with compact MCR structure for BW enhancement. J. Korean Inst. Commun. Sci. 42, 798–805 (2017)
Nadeem, I., Shrestha, S., Kim, S.W., Han, S.J., Choi, D.Y.: Design of slotted UWB antenna with modified ground plane for bio medical applications. In: Proceedings of the International Conference on Electronics, Information and Communication, Thailand, pp. 621–624 (2017)
Canelón, E.E.L., López, A.G., Chandra, R., Johansson, A.J.: 3D printed miniaturized UWB antenna for wireless body area network. In: IEEE 8th European Conference on Antennas and Propagation (EuCAP), pp. 3090–3093 (2014)
Palaniswamy, S.K., Selvam, Y.P., Gulam Nabi Alsath, M., Kanagasabai, M., Kingsly, S., Subbaraj, S.: 3-D eight-port ultrawideband antenna array for diversity applications. IEEE Antennas Wirel. Propag. Lett. 16, 569–572 (2017)
Ghazali, M.I.M., Gutierrez, E., Myers, J.C., Kaur, A., Wright, B., Chahal, P.: Affordable 3D printed microwave antennas. In: IEEE 65th Electronic Components and Technology Conference (ECTC), pp. 240–246 (2015)
Mazhar, W., Tarar, M.-A., Tahir, F.A., Gulistan, W.: A low profile cross strip 3D monocone antenna for UWB applications. Progr. Electromagn. Res. 46, 51–61 (2014)
Chen, S.L., Lin, K.H., Mittra, R.: Miniature and near-3D omnidirectional radiation pattern RFID tag antenna design. Electron. Lett. 45, 923–924 (2009)
Zhu, S., Ghazaany, T.S., Abd-Alhaeed, R.A., Jones, S.M., Noras, J., Suggett, T., Marker, S.: Miniaturized tunable conical helix antenna. In: IEEE Radio and Wireless Symposium (RWS), pp. 100–102 (2014)
Acknowledgement
This research was supported by the MSIP (Ministry of Science, ICT and Future Planning), Korea, under the Global IT Talent Information and Communication Technology (IITP-2017-0-01658) supervised by the IITP (Institute for information and Communication Technology promotion) and partially by the Human Resource Training Program for Regional Innovation and Creativity through the Ministry of Education and National Research Foundation of Korea (2015H1C1A1035855).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Nadeem, I., Choi, DY., Noh, Sk., Ghimire, J., Yu, HG. (2019). 3D Circular Embedded Antenna Mounted on Coaxial Feeding for Future Wideband Applications. In: Arai, K., Kapoor, S., Bhatia, R. (eds) Advances in Information and Communication Networks. FICC 2018. Advances in Intelligent Systems and Computing, vol 886. Springer, Cham. https://doi.org/10.1007/978-3-030-03402-3_10
Download citation
DOI: https://doi.org/10.1007/978-3-030-03402-3_10
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-03401-6
Online ISBN: 978-3-030-03402-3
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)