Abstract
Characterization of mechanical behavior of materials and interfaces and joints (contacts), called constitutive modeling, is vital for realistic and economic solutions of geotechnical problems by using conventional and advanced computer methods. Since the latter allows complex factors that influence the material behavior, development and use of general and unified constitutive models that allow for such factors assume enhanced importance. This paper presents a brief review of available constitutive models and their limitations, and introduces and provides details of a unified and powerful modeling approach called the disturbed state concept (DSC) that can be used for a wide range of geologic, concrete, asphaltic, metallic, solders and polymeric materials, and contacts. The DSC with the hierarchical single surface (HISS) plasticity model has been used successfully for a wide range of geologic materials and contacts, and for prediction of measured behavior for many boundary value problems. Typical examples for validation of the behavior geologic martials and contacts, and of a boundary value problem are presented in the paper.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Desai, C.S.: Mechanics of materials and interfaces: the disturbed state concept. CRC Press, Boca Raton, FL, USA (2001)
Desai, C.S.: Constitutive modeling of materials and contacts using the disturbed state concept: part 1—background and analysis. Comput. Struct. 146, 214–233 (2015)
Desai, C.S.: Constitutive modeling of materials and contacts using the disturbed state concept: part 2—validations at specimen and boundary value problem levels. Comput. Struct. 146, 234–251 (2015)
Desai, C.S.: Constitutive modeling vital for computational mechanics, expressions. IACM Int. Assoc. Comput. Mech. 41(17), 12–17 (2017)
Desai, C.S., Siriwardane, H.J.: Constitutive Laws for Engineering Materials. Prentice-Hall, Englewood Cliffs, NJ, USA (1984)
Roscoe, K.H., Schofield, A., Wroth, C.P.: On yielding of soils. Geotechnique 8, 22–53 (1958)
Mroz, Z.: On the description of anisotropic work hardening. J. Mech. Phys. Solids 15, 163–175 (1967)
Prevost, J.H.: Plasticity theory for soils stress-strain behavior. J. Eng. Mech., ASCE 104(5), 1177–1194 (1978)
Dafalias, Y.F.: A bounding surface plasticity model. Proc., 7th Cong. Appl. Mech., Sherbrooke, Canada, 1979
Pastor, M., Zienkiewicz, O.C., Chan, A.H.C.: Generalized plasticity and the modeling of soil behavior, Int. J. Num. Analyt. Comp. Meth. Geomech. 14(3), 151–190 (1990)
Manzanal, D., Pastor, M., Merodo, J.: Generalized plasticity constitutive model basedon state parameters. CMES Comput. Model. Eng. Sci. 55(3), 17–20 (2010)
Mühlhaus, H.B. (ed.): Continuum Models for Materials with Microstructure. Wiley, Chichester, UK (1995)
Desai, C.S.: A general basis for yield, failure and potential functions in plasticity. Int. J. Num. Analyt. Meth. Geomech. 4, 361–375 (1980)
Desai, C.S., Somasundaram, S., Frantziskonis, G.: A hierarchical approach for constitutive modeling of geolotic materials. Int. J. Num. Analyt. Meth. Geomech. 10(3), 225–257 (1986)
Desai,C.S.: Unified DSC constitutive model for pavement materials with numerical implementation. Int. J. Geomech. ASCE, 7(2), 83–101 (2007)
Akhaveissy, A.H., Desai, C.S.: Application of DSC model for nonlinear analysis of reinforced concrete frames. Fin. Elem. Anal. Des. J. 50, 98–107 (2012)
Kachanov, L.M.: Introduction to Continuum Damage Mechanics. Martinus Nijhoft Publsihers, Dordrecht, The Netherlands (1986)
Bazant, Z.P.: Nonlocal damage theory based on micromechanics of crack interactions. J. Eng. Mech. ASCE 120, 593–617 (1954)
Desai, C.S.: A consistent finite element technique for work-softening behavior. In: Proceedings of the International Conference on Comp. Meth. in Nonlinear Mechanics, J. T. Oden, et al. (editors), Univ. of Texas, Austin, TX, USA, 1974
Desai, C.S., Li, G.C.: A residual procedure and application for free surface flow in porous media. Int. J. Adv. Water Resour. 6(1), 27–35 (1983)
Desai, C.S., Toth, J.: Disturbed state constitutive modeling based on stress-strain and nondestructive behavior. Int. J. Solids Struct. 33(1), 1619–1650 (1996)
Desai, C.S., Basaran, C., Dishongh, T., Prince, J.: Thermomechanical analysis in electronic packaging with unified constitutive model for materials and joints, components, packaging and manuf. Tech. Part B, Adv. Packag. IEEE Trans. 21(1), 87–97 (1998)
Desai, C.S., Dishongh, T., Deneke, P.: Disturbed state constitutive model for thermomechanical behavior of dislocated silicon with impurities. J. Appl. Phys. 84(11), 5977–5984 (1998)
Desai, C.S.: Evaluation of liquefaction using disturbance and energy approaches. J. Geotech. Geoenviron. Eng. ASCE, 126(7), 618–631 (2000)
Desai, C.S., Pradhan, S.K., Cohen, D.: Cyclic testing and constitutive modeling of saturated sand-concrete interfaces using the disturbed state concept. Int. J. Geomech. 5(4), 286–294 (2005)
Sane, S., Desai, C.S., Jenson, J.W., Contractor, D.N., Carlson, A.E., Clark, P.U.: Disturbed state constitutive modeling of two Pleistocene tills. Q. Sci. Rev. 27(3–4), 267–283 (2008)
Bak, P., Chen, K.: Self-organized criticality. Sci. Am. (1991)
Desai, C.S., Zaman, M.M., Lightner, J.G., Siriwardane, H.J.: Thin-layer element for interfaces and joints. Int. J. Num. Analyt. Meth. Geomech. 14(1), 1–18 (1986)
Sharma, K.G., Desai, C.S.: An analysis and implementation of thin-layer element for interfaces and joints. J. Eng. Mech. ASCE, 118, 545–569 (1992)
Desai, C.S., Ma, Y.: Modelling of joints and interfaces using the disturbed state concept. Int. J. Num. Analyt. Meth. Geomech. 16(9), 623–653 (1992)
Fakharian, K., Evgin, E.: Elasto-plastic modeling of stress-path dependent behavior of interfaces. Int. J. Num. Analyt. Meth. Geomech. 24(2), 183–199 (2000)
Desai, C.S., Basaran, C., Zhang, W.: Numerical algorithms and mesh dependence in the disturbed state concept. Int. J. Num. Methods in Eng. 40(16), 3059–3080 (1997)
Desai, C.S., Zhang, W.: Computational aspects of disturbed state constitutive models. Int. J. Comp. Meth. Appl. Mech. Eng. 151, 361–376 (1998)
A.K. Garakani, S.M. Hari, Desai, C.S., S.M. Ghafouri, B. Sadollahzadeh, H.H. Senejani. Testing and constitutive modeling of lime-stabilized collapsible loess, Pat I and II (Modeling and Validations). Int. J. Geomech. (Resubmitted After Review) (2018)
Xiao, Y., Desai, C.S.: Constitutive modeling for overconsolidated clays based on disturbed state concept: Part I and Part II. Int. J. Geomech. (ASCE, Resubmitted After Review) (2018)
Essa, M.J.K., Desai, C.S.: Cyclic testing and modeling of saturated interfaces with effect of surface roughness: I and II – Modeling and validations. submitt. Int. J. Geomech. ASCE (2018)
Toufigh, V., Shirkhorshidi, S.M., Hosseinali, M.: Experimental Investigation and Constitutive Modeling of Polymer Concrete and Sand Interface. Int. J. of Geomech. ASCE 17(1) (2017)
Toufigh, V., Abyaneh, M.J.: Evaluation of rocks by considering softening behavior and volumetric deformation. Int. J. Geomech. (ASCE, Accepted for Publication) 2018
Essa, M.J.K., Desai, C.S.: Dynamic soil-pile interaction using the DSC constitutive model. Indian Geotech. J. 47(2), 137–149 (2017)
Park, I.J., Desai, C.S.: Cyclic behavior of sand using disturbed state concept. J. of Geotech. Geoenviron. Eng. ASCE 126(9), 834–846 (2000)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Desai, C.S. (2019). Constitutive Modeling of Geologic Materials and Interfaces: Significant for Geomechanics. In: Shehata, H., Desai, C. (eds) Advances in Numerical Methods in Geotechnical Engineering. GeoMEast 2018. Sustainable Civil Infrastructures. Springer, Cham. https://doi.org/10.1007/978-3-030-01926-6_1
Download citation
DOI: https://doi.org/10.1007/978-3-030-01926-6_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-01925-9
Online ISBN: 978-3-030-01926-6
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)