Abstract
Electrocoagulation is successfully used for purifying various industrial wastewaters. In order to improve the quality of wastewater treatment and to reduce economic costs for achieving the specified pollution indicators, an automation system for controlling the wastewater treatment by an electrocoagulation method has been developed. A phenomenological mathematical model of the electrocoagulation process has been adapted for the investigation of the effect of current supply on the quality of wastewater treatment. The estimation of the dynamic characteristics of the electrocoagulation processes and the investigation of the influence of current supply on the concentration of the inlet pollution is made by means of simulation modeling. Based on experimental data a method of determination of regulator adjustment has been developed. A simulation model of the electrocoagulation process taking into account geometrical dimensions of the reactor, volume flow rate of the liquid and the applied current supply has been elaborated. An automation system for controlling concentration of nickel ions with an algorithm of operation for minimum power expenses has been proposed. The automation provides real-time control of the system based on SCADA-system WinCC Flexible. The automation control system with P-regulator can conserve up to 21.4% of power expenses.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Djaenudin, Muchlis, Ardeniswan: Nickel removal from electroplating wastewater using electrocoagulation. IOP Conf. Ser. Earth Environ. Sci. 160, 1–8 (2018)
Elnenay, A.E.M.H., Malash, G.F., Nassef, E., Magid, M.H.A.: Treatment of drilling fluids wastewater by electrocoagulation. Egypt. J. Pet. 26(1), 203–208 (2016)
Pavón, T., del Río, G.M., Romero, H., Huacuz, J.M.: Photovoltaic energy-assisted electrocoagulation of a synthetic textile effluent. Int. J. Photoenergy 3, 1–9 (2018)
Perren, W., Wojtasik, A., Cai, Q.: Removal of microbeads from wastewater using electrocoagulation. Am. Chem. Soc. Omega 3, 3357–3364 (2018)
Nepo Hakizimana, J., Gourich, B., Chafi, M., Stiriba, Y., Vial, C., Drogui, P., Naja, J.: Electrocoagulation process in water treatment: a review of electrocoagulation modeling approaches. Desalination 404, 1–21 (2017)
Kruglikov, S.S., Turaev, D.U., Borodulin, A.A.: Local electrochemical purification of washing waters of electroplating from heavy metal ions in a slit diaphragm electrocoagulator with an insoluble anode. Galvanotech. Surf. Treat. 12(4), 35 (2004)
Philipchuk, V.L.: Cleaning of Multicomponent Metal-Containing Sewage from Industrial Enterprises. UDUVGP, Rivne (2004)
Bomba, A., Safonyk, A., Fursachik, E.: Identification of mass transfer distribution factor and its account for magnetic filtration process modeling. J. Autom. Inf. Sci. 45(4), 16–22 (2013)
Yakovlev, S.V., Voronov, Y.: Water Disposal and Wastewater Treatment, 4th edn. Publishing of the DIA, Moscow (2006)
Ponkratova, S.A., Emelyanov, V.M., Sirotkin, A.S., Shulaev, M.V.: Mathematical modeling and management of sewage treatment quality. Vestn. Kazan Technol. Univ. 5–6, 76–85 (2010)
Adetola, V., Lehrer, D., Guay, M.: Adaptive estimation in nonlinearly parameterized nonlinear dynamical systems. In: American Control Conference on O’Farrell Street, San Francisco, USA, pp. 31–36 (2011)
Filatova, E.G., Kudryavtseva, E.V., Soboleva, A.A.: Optimization of parameters of electrocoagulation process on the basis of mathematical modeling. Bull. Irkutsk. State Tech. Univ. 4(75), 117–123 (2013)
Bomba, A.Y., Safonik, A.P.: Mathematical simulation of the process of aerobic treatment of wastewater under conditions of diffusion and mass transfer perturbations. J. Eng. Phys. Thermophys. 91(2), 318–323 (2018)
Shantarin, V.D., Zavyalov, V.V.: Optimization of processes of electrocoagulation treatment of drinking water. Scientific and technical aspects of environmental protection. SAT Rev. Inf. 5, 62–85 (2003)
Khalturaina, T.I., Rudenko, T.M., Churbakova, O.V.: Investigation of the technology of electrochemical treatment of sewage containing emulsified petroleum products. Izv. Univ. Constr. 8, 56–60 (2008)
Nikiforova, E.Yu., Kilimnik, A.B.: The regularities of electrochemical behavior of metals under the influence of alternating current. Vestn. TSTU 15(3), 604–614 (2009)
Bomba, A., Kunanets, N., Nazaruk, M., Pasichnyk, V., Veretennikova N.: Information technologies of modeling processes for preparation of professionals in smart cities. In: Advances in Intelligent Systems and Computing, pp. 702–712 (2018)
Shakhovska, N., Vysotska, V., Chyrun, L.: Features of e-learning realization using virtual research laboratory. In: XIth International Scientific and Technical Conference Computer Sciences and Information Technologies (CSIT), Lviv, pp. 143–148 (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Safonyk, A., Bomba, A., Tarhonii, I. (2019). Modeling and Automation of the Electrocoagulation Process in Water Treatment. In: Shakhovska, N., Medykovskyy, M. (eds) Advances in Intelligent Systems and Computing III. CSIT 2018. Advances in Intelligent Systems and Computing, vol 871. Springer, Cham. https://doi.org/10.1007/978-3-030-01069-0_32
Download citation
DOI: https://doi.org/10.1007/978-3-030-01069-0_32
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-01068-3
Online ISBN: 978-3-030-01069-0
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)