Abstract
Computational homogenisation is a useful tool to predict the macroscale response of composite materials without the cumbersome experimental programme. However, careful verification is required for computational methods as well. A recently proposed method to create synthetic 3D mesoscale models of hot mix asphalt uses Voronoi polyhedra to represent the mineral aggregate. The agreement of these synthetic shapes with data from XRCT scanning is investigated. Typical shape measures are compared, and good agreement is found. The generalised Maxwell model is used to describe the viscoelasticity of the mortar. However, the previously used experimental data is found to be inadequate. This is attributed to the hitherto employed mortar design, which is revised, and a review of the relevant literature is conducted. Reported experimental data is critically assessed in terms of usefulness for homogenisation schemes. First-order strain driven homogenisation is then carried out in frequency domain in order to obtain the macroscale response, which is compared to macroscale experimental data. A satisfactory agreement is found.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsNotes
- 1.
Often termed fine aggregate matrix (FAM) in the relevant literature.
- 2.
Or volume in case of uniform density.
References
Allen Cooley Jr., L., Prowell, B.D., Brown, E.R.: Issues pertaining to the permeability characteristics of coarse-graded superpave mixes, s.l.: s.n. (2002)
Anon: DIN EN 933-4 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index; German version EN 933-4:2008. s.l.:s.n. (2015)
Chen, J., Wang, H., Li, L.: Virtual testing of asphalt mixture with two-dimensional and three-dimensional random aggregate structures. Int. J. Pavement Eng. 18(9), 824–836 (2015). https://doi.org/10.1080/10298436.2015.1066005
Gudipudi, P., Underwood, B.S.: Testing and modeling of fine aggregate matrix and its relationship to asphalt concrete mix. Transp. Res. Rec. J. Transp. Res. Board 2507(1), 120–127 (2015)
Karki, P., Kim, Y.-R., Little, D.N.: Dynamic modulus prediction of asphalt concrete mixtures through computational micromechanics. Transp. Res. Rec. J. Transp. Res. Board 2507, 1–9 (2015)
Krumbein, W.C.: Measurement and geological significance of shape and roundness of sedimentary particles. J. Sediment. Res. 11, 64–72 (1941)
Neumann, J., Simon, J.-W., Mollenhauer, K., Reese, S.: A framework for 3D synthetic mesoscale models of hot mix asphalt for the finite element method. Constr. Build. Mater. 148, 857–873 (2017)
Ozer, H., Ghauch, Z.G., Dhasmana, H., Al-Qadi, I.L.: Computational micromechanical analysis of the representative volume element of bituminous composite materials. Mech. Time Depend. Mater. 20(3), 441–453 (2016)
Schüler, T., Jänicke, R., Steeb, H.: Nonlinear modeling and computational homogenisation of asphalt concrete on the basis of XRCT scans. Constr. Build. Mater. 109, 96–108 (2016)
Schüler, T., et al.: Multi-scale modelling of elastic/viscoelastic compounds. ZAMM J. Appl. Math. Mech./Z. Für Angew. Math. Und Mech. 93, 126–137 (2013)
Underwood, B.S., Kim, Y.R.: Effect of volumetric factors on the mechanical behavior of asphalt fine aggregate matrix and the relationship to asphalt mixture properties. Constr. Build. Mater. 49, 672–681 (2013)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 RILEM
About this paper
Cite this paper
Neumann, J., Simon, JW., Reese, S. (2019). Meso- to Macroscale Homogenisation of Hot Mix Asphalt Considering Viscoelasticity and the Critical Role of Mortar. In: Poulikakos, L., Cannone Falchetto, A., Wistuba, M., Hofko, B., Porot, L., Di Benedetto, H. (eds) RILEM 252-CMB Symposium. RILEM 252-CMB 2018. RILEM Bookseries, vol 20. Springer, Cham. https://doi.org/10.1007/978-3-030-00476-7_45
Download citation
DOI: https://doi.org/10.1007/978-3-030-00476-7_45
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-00475-0
Online ISBN: 978-3-030-00476-7
eBook Packages: EngineeringEngineering (R0)