Abstract
Direct sun can generate the same heat as a single bar radiator over each square meter of a surface. Shading can cool up to 90% of this heat. The big problem is that sunlight is a direct source of heat and the radiant heat from the sun passes through glass and is absorbed by building elements and furnishings, which then re-radiate it. Shading is the first step toward natural cooling in building systems. The starting point of cooling building systems is preventing sunlight from entering the building in warm periods. A shade is like putting a hat on a building. Shading must be the first line of defense against excessive heat gain. Shading in hot climate is vital. While there is no dispute about the general benefit of shading, nailing down the actual savings can be difficult. The highest priority must be placed on the surfaces that receive the most summer heat; that is, usually the east and west. The best shading occurs before the sun’s heat reaches the building. Shading is a very important method of stopping heat gain and unwanted direct sunlight by diverting the sun’s rays before entering the building. This can be accomplished with fixed and adjustable shading. Shading of the building and outer spaces can: (1) Reduce summer temperatures; (2) improve thermal comfort; (3) save building energy.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Al-musaed A (2004) Intelligent sustainable strategies upon passive bioclimatic houses. Arkitektskole in Aarhus, Denmark
Al-musaed A (2007) Shading effects upon cooling house strategy in Iraq, 2nd PALENC Conference and 28th AIVC Conference on Building Low Energy Cooling and Advanced Ventilation Technologies in the 21st Century, September 2007, Crete island, Greece
Bahadori MN (1978) Passive cooling systems in Iranian architecture, Scientific American, vol 238, no 2
Beckett HE (1974) Windows, crosby lockwood staples. London, p 181
Brown GZ (1985) Sun, wind and light: architectural design strategies. Wiley, pp 65–67
Butters C (2002) Architects in the time and space, understanding sustainability. UIA Congress, Berlin
Cook J (ed) (1989) Passive cooling. MIT Press, Cambridge
Givoni B (1992) Comfort, climate analysis and building design guidelines, energy and buildings
Givoni B, La Roche P (2001) Radiant cooling systems for developing countries. Accepted for ISES 2001, Adelaide Australia
Moore S (2001) Living homes: sustainable architecture and design. Chronicle books, San Francisco, p 36
The patrimony of passive cooling (1999) Proceeding of the symposium on Mosque. The environmental control in Mosque architecture. King Saudi University, Riyadh, Kingdom of Saudi Arabia, pp 1–14
Thompson GF, Steiner FR (1997) Ecological design planning.Wiley, New York
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2011 Springer-Verlag London Limited
About this chapter
Cite this chapter
Almusaed, A. (2011). Cooling by Effective Shading. In: Biophilic and Bioclimatic Architecture. Springer, London. https://doi.org/10.1007/978-1-84996-534-7_28
Download citation
DOI: https://doi.org/10.1007/978-1-84996-534-7_28
Published:
Publisher Name: Springer, London
Print ISBN: 978-1-84996-533-0
Online ISBN: 978-1-84996-534-7
eBook Packages: EngineeringEngineering (R0)