Abstract
Disassembly sequence planning not only reduces product lifecycle cost, but also greatly influences environmental impact Many prior green design research studies have focused on complete disassembly of an end-of-life product to recover valuable components. However, complete disassembly is often not practical or cost effective if only a few components will be recovered and recycled from a given product. Selective disassembly sequence planning focuses on disassembling only one or more selected components from a product for reuse, recycling, maintenance, and remanufacturing. This paper presents a rule-based recursive method for finding an optimal heuristic selective disassembly sequence for green design. Most prior methods either enumerate all solutions or use a stochastic method to generate random solutions. Enumerative or stochastic methods often require tremendous computational resources while, at the same time, they often fail to find realistic or optimal solutions. On the contrary, the proposed method establishes certain heuristic disassembly rules to eliminate uncommon or unrealistic solutions. In addition, rather than considering geometric constraints for each pair of components, the developed method only considers geometric relationships between a part and its neighboring parts. As a result, the developed method can effectively find an optimal heuristic solution while greatly reducing computational time and space.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Aguinaga, I., Borro, D., and Matey, L., Automatic Selective Disassembly and Path Planning for the Simulation of Maintenance Operations. IEEE Virtual Reality Conference 2007 March 10-14; 283-284.
Aguinaga, I., Borro, D., and Matey, L., Parallel RRT-based path planning for selective disassembly planning. Int J Adv Manuf Technol 2008; 36: 1221-1233.
Boothroyd, G., Dewhurst, P., and Knight, W., Product Design for Manufacture and Assembly Second Edition Revised and Expanded. Published by CRC Press Taylor & Francis Group. Boca RatonLondon New York, 2002; 96-103.
Chen, S-F., Oliver, J. H., Chuo, S-Y., and Chen, L-L., Parallel disassembly by onion peeling. Transactions of The ASME, Journal of Mechanical Design 1997; 119: 267-274.
Chung, C., and Peng, Q., An integrated approach to selective-disassembly sequence planning. Robotics and Computer-Integrated Manufacturing 2005; 21: 475-485.
Chung, C., and Peng, Q., A hybrid approach to selective-disassembly sequence planning for de-manufacturing and its implementation on the Internet. Int J Adv Manuf Technol 2006; 30: 521-529.
Chung, C., and Peng, Q., Sequence planning for selective disassembly in de-manufacturing. International Journal of Computer Integrated Manufacturing 2006; 19: 3: 278-286.
Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Official Journal of the European Union, 2003.
Directive 2002/96/EC of the Europoean Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment. Official Journal of the European Union, 2003.
Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005. Official Journal of the European Union, 2005.
GarcÃa, M. A., Larré, A., López, B., and Oller, A., Reducing the Complexity of Geometric Selective Disassembly. Proceedings of the 2000 IEEE/RSJ International Conference on Intelligent Robots and Systems. 1474-1479.
Giudice, F., and Fargione, G., Disassembly planning of mechanical systems for service and recovery: a genetic algorithms based approach. J Intell Manuf 2007; 18:313–329.
Kara, S., Pornprasitpol, P., and Kaebernick, H., A selective disassembly methodology for end-of-life products. Assembly Automation 2005; 25: 2: 124–134.
Kara, S., Pornprasitpol, P., and Kaebernick, H., Selective Disassembly Sequencing: A Methodology for the Disassembly of End-of-Life Products. Annals of the CIRP 2006; 55: 1: 37-40.
Mascle, C., and Balasoiu, B. -A., Algorithmic selection of a disassembly sequence of a component by a wave propagation method. Robotics and Computer Integrated Manufacturing 2003; 19: 439-448.
Mascle, C., and Hong, P -Z., Integrating environmental consciousness in product/process development based on life-cycle thinking. Int. J. Production Economics 2008; 112: 5-17.
Pitipong, V., and Surendra M., G., Optimal analysis of lot-size balancing for multiproducts selective disassembly. International Journal of Flexible Automation and Integrated Manufacturing 1998; 6:3: 245-269.
Shyamsundar, N., and Gadh, R., Selective Disassembly of Virtual Prototypes. Proceedings of the IEEE International Conference on Systems, Man and Cybernetics 1996; 4: 3159-3164.
Srinivasan, H., and Gadh, R., Selective disassembly: Representation and Comparative Analysis of Wave Propagation Abstractions in Sequence Planning. Proceedings of the 1999 IEEE International Symposium on Assembly and Task Planning Porto, Portugal, 1999; 129-134.
Srinivasan, H., Figueroa, R., and Gadh, R., Selective disassembly for virtual prototyping as applied to de-manufacturing. Robotics and Computer Integrated Manufacturing 1999; 15: 231-245.
Srinivasan, H., and Gadh, R., Efficient Geometric Disassembly of Multiple Components from an Assembly Using Wave Propagation. Jouranl of Mechanical Design 2000; 122: 179-184.
Srinivasan, H., and Gadh, R., A non-interfering selective disassembly sequence for components with geometric constraints. IIE Transactions 2002; 34: 349-361.
Wang, J, -F., Liu, J. -H., Li S. -Q., and Zhong, Y. -F., Intelligent selective disassembly using the ant colony algorithm. Artificial Intelligence for Engineering Design, Analysis and Manufacturing 2003; 17: 325–333.
Wang, J. –F., Li, S. –Q., and Liu, J. –H., Selective disassembly planning for product green manufacturing. Computer Integrated Manufacturing Systems June 2007; 13: 6: 1097-1102.
Xue, J. –F., Qiu, C. –H., and Xiang, D., Planning of Selective Disassembly Sequence Based on Ant Colony Optimization Algorithm. Journal of Computer Aided Design & Computer Graphics 2007; l119: 16: 742-747.
Yi, J., Yu, B., Du, L., Li, C., amd Hu, D., Research on the selectable disassembly strategy of mechanical parts based on the generalized CAD model. Int J Adv Manuf Technol 2008; 37: 599-604.
Zhang, X. -H., Li, S. -Q., Wang, J. -F., and Li, X., Single object selective disassembly sequence planning based on ant colony algorithm. Computer Integrated Manufacturing Systems 2007; 13: 6: 1110-1114.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer London
About this paper
Cite this paper
Smith, S., Chen, WH. (2009). Rule-Based Recursive Selective Disassembly Sequence Planning for Green Design. In: Chou, SY., Trappey, A., Pokojski, J., Smith, S. (eds) Global Perspective for Competitive Enterprise, Economy and Ecology. Advanced Concurrent Engineering. Springer, London. https://doi.org/10.1007/978-1-84882-762-2_27
Download citation
DOI: https://doi.org/10.1007/978-1-84882-762-2_27
Publisher Name: Springer, London
Print ISBN: 978-1-84882-761-5
Online ISBN: 978-1-84882-762-2
eBook Packages: EngineeringEngineering (R0)