Abstract
A web-based rapid prototyping and manufacturing (RP&M) system offers a collaborative production environment among users and RP&M providers to implement the remote service and manufacturing for rapid prototyping, to enhance the availability of RP&M facilities, and to improve the capability of rapid product development for various small and medium sized enterprises. This chapter first provides a comprehensive review of recent research on developing web-based rapid prototyping and manufacturing systems. In order to meet the increasing requirements of rapid product development, an integrated manufacturing system based on RP&M is proposed. The workflow and overall architecture of a web-based RP&M system are described in detail. Furthermore, the key technologies for developing the Webbased RP&M system, which involve deploying the running platform, determining the system model, choosing a server-side language, constructing development platform as well as designing the database and developing application, are also discussed. Finally, a case study is given to demonstrate the application of the web-based RP&M system.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Yang, H. and Xue, D., 2003, “Recent research on developing Web-based manufacturing systems: a review,” International Journal of Production Research, 41(15), pp. 3601–3629.
Rahman, S.M., Sarker, R. and Bignall, B., 1999, “Application of multimedia technology in manufacturing: a review,” Computers in Industry, 38(1), pp. 43–52.
Luo, C.R., Tzou, J.H. and Chang, Y.C., 2001, “Desktop rapid prototyping system with supervisory control and monitoring through Internet,” IEEEE/ASME Transactions on Mechatronics, 6(4), pp. 399–409.
Bailey, M.L., 1995, “Tele-manufacturing: rapid prototyping on the Internet,” IEEE Computer Graphic and Applications, 15(6), pp. 20–26.
San Diego Supercomputer Centre, 2007, http://www.sdsc.edu/tmf.
Bailey, M.L., 1995, Tele-manufacturing: Rapid Prototyping on the Internet with Automatic Consistency-checking, White Paper, University of California at San Diego.
Tzou, J.H., 2004, “Distributed Web-based desktop e-manufacturing system,” In The 2nd International Conference on Autonomous Robots and Agents, pp. 356–361.
Luo, C.R., Lan, C.C., Tzou, J.H. and Chen, C.C., 2004, “The development of Web based e-commerce platform for rapid prototyping system,” In Proceedings of the 2004 IEEE International Conference on 1etworking, Sensing & Control, pp. 122–127.
Luo, C.R. and Tzou, J.H., 2003, “The development of distributed Web-based rapid prototyping manufacturing system,” In Proceedings of the 2003 IEEE International Conference on Robotics & Automation, pp. 1717–1722.
Luo, C.R. and Tzou, J.H., 2004, “The development of an intelligent web-based rapid prototyping manufacturing system,” IEEE Transactions on Automation Science and Engineering, 1(1), pp. 4–13.
Luo, C.R., Lee, W.Z., Chou, J.H. and Leong, H.T., 1999, “Tele-control of rapid prototyping machine via Internet for automated tele-manufacturing,” In Proceedings of the 1999 IEEE International Conference on Robotics & Automation, pp. 2203–2208.
Jiang, P. and Fukuda, S., 2001, “TeleRP – an Internet web-based solution for remote rapid prototyping service and maintenance,” International Journal of Computer Integrated Manufacturing, 14(1), pp. 83–94.
Jiang, P. and Fukuda, S., 1999, “Internet service and maintenance for RP-oriented tele-manufacturing,” Concurrent Engineering: Research and Applications, 7(3), pp. 179–189.
Liu, X.G., Jin, Y. and Xi, J.T., 2006, “Development of a web-based telemanufacturing service system for rapid prototyping,” Journal of Manufacturing Technology Management, 17(3), pp. 303–314.
Lan, H.B., Chin, K.S. and Hong J., 2005, “Development of a tele-service system for RP service bureaus,” Rapid Prototyping Journal, 11(2), pp. 98–105.
Lan, H.B., Ding, Y.C., Hong, J., Huang, H.L. and Lu, B.H., 2004, “A web-based manufacturing service system for rapid product development,” Computers in Industry, 54(1), pp. 51–67.
Tay, F.E.H., Khanal, Y.P., Kwong, K.K. and Tan, K.C., 2001, “Distributed rapid prototyping – a framework for Internet prototyping and manufacturing,” Integrated Manufacturing Systems, 12(6), pp. 409–415.
Xu, A.P., Hou, H.Y., Qu, Y.X. and Gao, Y.P., 2005, “VRPS-I: an Internet-based virtual rapid prototyping system,” Journal of Integrated Design and Process Science, 9(3), pp. 15–27.
Cooper, A.G., Kang, S., Kietzman, J.W., Prinz, F.B., Lombardi, J.L. and Weiss, L.E., 1999, “Automated fabrication of complex moulded parts using Mould Shape Deposition Manufacturing,” Materials and Design, 20(2), pp. 83–89.
Rajagopalan, S., Pinilla, J.M. and Losleben, P., 1998, “Integrated design and manufacturing over the Internet,” In ASME Design Engineering Technical Conferences, Atlanta, GA, pp. 13–16.
Huang, H.L., Ding, Y.C. and Lu, B.H., 2000, “Research of the rapid prototypeoriented tele-service system based on Internet and Intranet,” Journal of Xi'an Jiaotong University, 34(7), pp. 52–57.
Huang, J., Jiang, P.Y., Yan, J.Q., Ma, D.Z. and Jin, Y., 2000, “Implementing Internet/Web-based rapid prototyping tele-manufacturing service,” Journal of Shanghai Jiaotong University, 34(3), pp. 433–436.
Fidan, I. and Ghani, N., 2007, “Remotely accessible laboratory for rapid prototyping,” In Proceedings of ASEE Annual Conference and Exposition, pp. 7.
Helsinki University of Technology, 2007, http://ltk.hut.fi/RP-Selector.
Gibson, I., 2002, Software Solutions for Rapid Prototyping, Professional Engineering Publishers, London, UK.
Lan, H., Ding Y. and Hong, J., 2005, “Decision support system for rapid prototyping process selection through integration of fuzzy synthetic evaluation and expert system,” International Journal of Production Research, 43(1), pp. 169–194.
Chung, C.W., Hong, J., Lee, A., Ramani, K. and Tomovic, M.M., 2003, “Methodology for selection of rapid tooling process for manufacturing application,” In 2003 ASME International Mechanical Engineering Congress, pp. 23–30.
Quickparts.com, 2007, http://www.quickparts.com.
3T RPD, 2007, http://www.3trpd.co.uk/request-a-quoye.htm.
Lan, H.B. and Ding, Y.C., 2007, “Price quotation methodology for stereolithography parts based on STL model,” Computers & Industrial Engineering, 52(2), pp. 241–256.
Lan, H.B., Ding, Y.C., Hong, J., Huang, H.L. and Lu, B.H., 2008, “Web-based quotation system for stereolithography parts,” Computers in Industry, doi: 10.1016/ j.compind.2008.03.006.
Rosen, D., 2001, “STL viewer,” http://srl.gatech.edu/Members/cwilliams/classes/ CBW.ME6104.Report.pdf.
Lan, H.B., Ding, Y.C., Hong, J. and Lu, B.H., 2007, “Research on ASP tool set for RP data pre-processing based on STL model,” China Mechanical Engineering, 18(5), pp. 559–563.
Roy, U. and Cargian, M., 1997, “Tele-manufacturing: object slicing for rapid prototyping on the Internet,” In Proceedings of 4th ISPE International Conference on Concurrent Engineering: Research and Applications, pp. 301–307.
Wu, Y.X., 2001, “Rapid prototyping job scheduling optimisation,” Master Thesis, Virginia Polytechnic Institute and State University.
Lin, H.H., Hsueh, C.W. and Chen, C.H., 2003, “A real-time scheduling approach for a Web-based rapid prototyping manufacturing platform,” In Proceedings of the 23rd International Conference on Distributed Computing System Workshops, pp. 42–47.
Wang, Q., Ren N.F. and Chen, X.L., 2006, “Java 3D-based remote monitoring system for FDM rapid prototype machine,” Computer Integrated Manufacturing Systems, 12(5), pp. 737–741.
Gao, C.Y., Wang, X., Yu, X.J. and Xu, Q.S., 2005, “Research and development of tele-control system for rapid prototyping machine based on Internet,” Journal of Jiangsu University (1atural Science Edition), 26(1), pp. 16–19.
Kang, Y.Y., Xi, J.T. and Yan, J.O., 2003, “Remote monitoring and diagnosis of breaking-down fault for FDM rapid prototyping machine,” Computer Integrated Manufacturing Systems, 9(9), pp. 771–775.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer London
About this chapter
Cite this chapter
Lan, H. (2009). A Web-based Rapid Prototyping Manufacturing System for Rapid Product Development. In: Wang, L., Nee, A. (eds) Collaborative Design and Planning for Digital Manufacturing. Springer, London. https://doi.org/10.1007/978-1-84882-287-0_10
Download citation
DOI: https://doi.org/10.1007/978-1-84882-287-0_10
Publisher Name: Springer, London
Print ISBN: 978-1-84882-286-3
Online ISBN: 978-1-84882-287-0
eBook Packages: EngineeringEngineering (R0)