Abstract
In general, machined holes have straight axes and their cross-sections are constant circles since holes are machined by drills. In other words, shapes of machined holes do not have so much variety. To solve the problem, the device was developed which can machine a certain shape on an inside wall of a straight hole by means of electrical discharge machining. This results in fabrication of holes whose cross-sections change variously. In the study, the holes are called cross-section changing holes. However, the device had only ability to make two-dimensional shapes. Therefore, the device has been improved so that three-dimensional shapes can be machined inside holes. From the result of the machining experiment, it is found that the improved device can machine a cross-section changing hole with a hemisphere.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
6 References
Morishige, K. and Takeuchi, Y., 2000, Strategic Tool Attitude Determination for Five-Axis Control Machining Based on Configuration Space, CIRP J. of Manufacturing Systems, 31/3:247–252.
Ishida, T., Mochizuki, Y., and Takeuchi, Y., 2002, Fin Fabrication inside a Hole by Means of Electrical Discharge Machining and Reciprocating Block Slider Crank Mechanism, Proc. of 2002 Japan-USA Symposium on Flexible Automation (2002JUSFA), 349–355.
Ishida, T., and Takeuchi, Y., 2005, Development of Hole-Inside shape Fabricating Method —Machined Shape Control by Means of Software—, Proc. of 5th Manufacturing & Machine Tool Conference, Japan Society of Mechanical Engineers (JSPE), 293–294 (in Japanese).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2008 Springer-Verlag London Limited
About this paper
Cite this paper
Ishida, T., Nagasawa, H., Kita, M., Takeuchi, Y. (2008). Creation of Cross-Section Changing Hole with a Hemisphere by Means of Electrical Discharge Machining. In: Mitsuishi, M., Ueda, K., Kimura, F. (eds) Manufacturing Systems and Technologies for the New Frontier. Springer, London. https://doi.org/10.1007/978-1-84800-267-8_74
Download citation
DOI: https://doi.org/10.1007/978-1-84800-267-8_74
Publisher Name: Springer, London
Print ISBN: 978-1-84800-266-1
Online ISBN: 978-1-84800-267-8
eBook Packages: EngineeringEngineering (R0)