Abstract
Burn-in is a quality screening technique used to induce early failures that would be costly if experienced by the customer. As a method to screen out the earlier failures of the products, burn-in testing has been widely used in electronic manufacturing as well as many other areas such as the military and aerospace industries since the 1950s. Burn-in has proven to be a very effective quality control procedure which can improve products’ quality, enhance their reliability for operational life, and bring both profit and goodwill to the manufacturers.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Baskin EM (2002) Analysis of burn-in time using the general law of reliability. Microelectronics Reliability 42:1967–1974
Chang DS (2000) Optimal burn-in decision for products with an unimodal failure rate function. European Journal of Operational Research 126:534–540
Chi D, Kuo W (1989) Burn-in optimization under reliability and capacity restrictions. IEEE Transactions on Reliability 38:193–198
Chien WK, Kuo W (1995) Modeling and maximizing burn-in effectiveness. IEEE Transactions on Reliability 44:19–25
Genadis TC (1996) A cost optimization model for determining optimal burn-in times at the module/system level of an electronic product. International Journal of Quality and Reliability Management 13:61–74
Guess F, Walker E, Gallant D (1992) Burn-in to improve which measure of reliability. Microelectronics and Reliability 32:759–762
Hui YV, Lu WL (1996) Cost optimization of accelerated burn-in. International Journal of Quality and Reliability Management 13:69–78
Jensen F, Petersen NE (1982) Burn-in: an engineering approach to the design and analysis of burn-in procedures. Wiley, New York
Kim KN (1998) Optimal burn-in for minimizing cost and multiobjectives. Microelectronics Reliability 38:1577–1583
Kim T, Kuo W (1998) Optimal burn-in decision making Qual. Reliab. Engng. Int 14:417–423
Kuo W (1984) Reliability enhancement through optimal burn-in. IEEE Transactions in Reliability R-33:145
Kuo W, Kuo Y (1983) Facing the headaches of early failures: a state-of-the-art review of burn-in decision. Proc IEEE 71:1257–1266
Launer RL (1993) Graphical techniques for analyzing failure data with the percentile residual-life function. IEEE Transactions on Reliability 42:71–80
Lu WL, Hui YV (1998) Economic design of high stress first burn-in processes. International Journal of Production Research 36:181–196
Mi J (1994a) Maximization of a survival probability and its application. J Appl Prob 31:1026–1033
Mi J (1994b) Burn-in and maintenance policy. Advances in Applied Probability 26:207–221
Mi J (1995) Bathtub failure rate and upside-down bathtub mean residual life. IEEE Transactions on Reliability 44:388–391
Mi J (1996) Minimizing some cost functions related both burn-in and field use. Operations Research 44:497–500
Mi J (1997) Warranty policies and burn-in. Naval Research Logistics 44,:199–209
Nicolato E, Runggaldier WJ (1999) A Bayesian dynamic programming approach to optimal maintenance combined with burn-in. Ann Oper Res 91:105–122
Perlstein D, Jarvis WH, Mazzuchi TA (2001) Bayesian calculation of cost optimal burn-in test duration for mixed exponential populations. Reliab Engng Syst Safety 72:265–273
Sheu S-H, Chien Y-H (2004) Minimizing cost-functions related to both burn-in and field-operation under a generalized model. IEEE Transactions on Reliability 53:435–439
Sheu S-H, Chien Y-H (2005) Optimal burn-in time to minimize the cost for general repairable products sold under warranty. European Journal of Operational Research 163:445–461
Spizzichino F (1991) Sequential burn-in procedures. J Statis Planning Infer 29:187–197
Su C-T, Wu C-L (2001) Intelligent approach to determining optimal burn-in time and cost for electronic products. International Journal of Quality and Reliability Management 18:549–559
Sultan TI (1986) Optimum burn-in time: model and application. Microelectronics and Reliability 26:909–916
Washburn LA (1970) Determination of optimum burn-in time: a composite criterion. IEEE Transactions on Reliability R-19:134–140
Whitbeck CW, Leemis LM (1989) Component vs. system burn-in techniques for electronic equipment. IEEE Transactions on Reliability 38:206–209
Wu C-L, Su C-T (2002) Determination of the optimal burn-in time and cost using an environmental stress approach: a case study in switch mode rectifier. Reliability Engineering and System Safety 76:53–61
Yan L, English JR (1997) Economic cost modelling of environmental-stress-screening and burn-in. IEEE Transactions on Reliability 46:275–282
Yuan J, Shih SW (1991) Mixed hazard models and their applications. Reliab Engng Syst Safety 33:115–129
Yun WY, Lee YW, Ferreira L (2002) Optimal burn-in time under cumulative free replacement warranty. Reliability Engineering and System Safety 78:93–0100
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2008 Springer London
About this chapter
Cite this chapter
Liu, X., Mazzuchi, T. (2008). The Optimal Burn-in: State of the Art and New Advances for Cost Function Formulation. In: Pham, H. (eds) Recent Advances in Reliability and Quality in Design. Springer Series in Reliability Engineering. Springer, London. https://doi.org/10.1007/978-1-84800-113-8_6
Download citation
DOI: https://doi.org/10.1007/978-1-84800-113-8_6
Publisher Name: Springer, London
Print ISBN: 978-1-84800-112-1
Online ISBN: 978-1-84800-113-8
eBook Packages: EngineeringEngineering (R0)