Abstract
This chapter describes the kind of erosion that involves impacts of solid particles at the target surface. With metal parts, the impact is elastic-plastic. Naturally, creation and development of the theory of erosion presumes an understanding of the theory of collision. This theory, however, still needs further refinement. In the past 25 years, researchers at TUT have paid considerable attention to the studies of the theory of collision and erosion.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
3.6 References
Davidenkov NN. Dynamic Testing of Metals. Moscow: 1929 (in Russian).
Engel O. Pits in metals by collision wih liquid drops and rigid steel spheres. J. of Research of the National Bureau of Standards. 1960; Vol.64A, N1:61–72.
Eichelberger RJ, Kineke JH. Hypervelocity Impact. In: High-Speed Physics. Vol.2, Moscow: Mir Publ, 1971;204–46 (in Russian).
Goldsmith W. Impact and contact phenomena at medium velocities. In: High-Speed Physics, Vol.2, Moscow: Mir Publ, 1971;153–203 (in Russian).
Kleis I, Uuemõis H. Untersuchung des Strahlverschleissmechanismus von Metallen. Zeitschrift für Werkstofftechnik, 1974;Heft 7:381–89.
Hutchings IM, Winter RE, Field JE. Solid particle erosion of metals: The removal of surface material by spherical particles. Proc Roy Soc London 1974;348A:379–92.
Kleis I. Hypothesis of constancy of required energy for formation of impact crashers, Proc Techn Univ Tallinn 1978;455:3–8 (in Russian).
Rinehart JS, Pearson J. Behaviour of Metals under Impulsive Loads. Moscow: Foreign Publishers, 1958 (in Russian).
Kangur HF. Dynamic Penetration of Rigid Sphere to Metallic Barrier. PhD Thesis, Tallinn 1987 (in Russian).
Kleis IR, Kangur HF. Resistance of metal surface to indentation by spherical projectile at impact. Proc 7th Conf on Erosion by Liquid and Solid Impact. Cambridge 1987;48-1–48-7.
Goodier IN. On the mechanics of indentation and cratering in solid targets of strain-hardering metal by impact of hard and soft spheres. Proc Seventh Hypervelocity Impact Symp, Tampa, Florida 1964;215–60.
Singer S. The influence of meteoritic particles to artifitial sattellites of Earth. Jet Propulsion, 1956;26/12:1071–75.
Lueger Lexikon der Technik. Band 3. Stuttgart:1961.
Gommel G. Stossuntersuchungen Stahlkugel — Stahlplatte im zusammenhang mit Strahlzertrümmerung und Strahlverschleiss. Techn-wiss Berichte MPA Stuttgart, 1967;Heft 67-01.
Tabor D. The Hardness of Metals. Oxford Univ. Press 1951.
Breckel H. Kenngrössen und Verschleiss metallischer Werkstoffe. Diss Univ Stuttgart 1968.
Kleis I, Remi T. On the geometry of impact craters produced by indentors of different shape. Proc Techn Univ Tallinn 1991;728:3–7 (in Russian).
Vitman FF, Stepanov AB. The influence of deformation rate to the deformation resistance of metals. Moscow: In: Some Strength Problems of Solid Body, Acad Sc USSR, 1959;207–21 (in Russian).
Huth G, Thompson J, and Van Valkenburg M. Some new results about the hypervelocity impacts. J of the Applied Mechanics 1957;24/1:65–68.
Kleis I, Remi T. Testing hardned steel targets for dynamic hardness. Proc Estonian Acad Sc Eng 2004;10/1:39–44.
Kangur H, Kleis I. The experimental determination and calculation of the coefficient of restitution. Proc Acad Sc USSR “Solid Mechanics” 1988;5:182–85 (in Russian).
Kleis I. Modelle zur analytischen Bestimmung der Stossziffer bei Metallen. Acta Universitatis Ouluensis C Tehnica 1996;92:8–15.
Frischman F, Haljasmaa I, Pappel T, Rudi U, and Scheglov I. Investigation of particle — wall collision. Proc Estonian Acad Sc Phys Math 1994;43:263–370.
Kleis I, and Hussainova I. Investigation of particle — wall impact process. Wear 1999;233–235:168–73.
Kleis I. Dynamische Härte als eine Physicalische Konstante. Proc of OST-94 Symposium on Machine Design, Oulu: 1994;13–26.
Kleis I. Analytical determination of indentor load in terms of impact energy. Acta Univ Oulu, 1997;C109:25–33.
Kirejev AV, and Malafejev NJ. The influence of ask particles flow parameters on boiler tubes wear. Polzunov Boiler-Turbine Inst Report N5881, Lengingrad, 1938 (in Russian).
Lebedev IK. Erosion in the boilers. Electric Power Stations 1958;11:22–27 (in Russian).
Finnie IA. Erosion of surfaces by solid particles. Wear 1960;3:87–103.
Bitter JGA. A study of erosion phenomena: Part II. Wear 1963;6:169–90.
Nepomnyashchy EF. Friction and wear caused by the stream of solid particles. Interation of Solid Bodies and Calculation of Friction Forces and Wear. Moscow:1971;190 (in Russian).
Abramov JA. The erosion of energetic equipment. Power Engineering 1985;7:15–21 (in Russian).
Beckmann G. and Gotzmann J. Analytical model of the blast wear intensity of metal based on a general arrangement for abrasive wear. Wear 1981;73:325–33.
Peter P. Strahlverschleiss an konventionellen Dampferzeugern-Prognose und Verschleissschutz. Wiss Berichte TH Zittau, 1004, 1989:Lecture NV/3.
Tadolder J. The influence of the geometry of abrasive particle on wear rate of metals. Proc Techn Univ Tallinn 1966;237:3–13 (in Russian).
Levin SM. Investigation of the Erosion of Steels in Different Conditions. Dissertation, Moscow Institute of Petrochemical and Gas Industry, 1978;207 (in Russian).
Ellermaa RR. Erosion prediction of pure metals and carbon steels. Wear 1993;162–164:1114–22.
Beckmann G. and Kleis I. Abtragvershleiss von Metallen. Leipzig:1983;184. (Distributed by Springer — Verlag Wien — New York).
Lepikson H. and Siimpoeg R. The methodics of erosion study at low temperatures and some results. Proc Techn Univ Tallinn 1969;271:31–39 (in Russian).
Üksti L. Physicochemical aspects of wet sand erosion mechanism. Proc Techn Univ Tallinn 1983;560:19–27 (in Russian).
Neiman A. Relationship Between Abrasivity of Sands and Their Geological and Physical Indicators. Research Report, Tallinn 1968 (in Estonian).
Uuemõis H. An Investigation into Some Laws of Hard-Particle Erosion. PhD Thesis, Tallinn 1967;185 (in Russian).
Uetz H. and Gross KJ. Strahlvershleiss in Abrasion and Erosion, München Wien: Carl Hanser Verlag, 1986;326–78.
Langeberg I. Study of Erosion at Small Angles of Impact. PhD Thesis, Tallinn 1968;196 (in Russian).
Kleis I. Effect of Hardness of Abrasive Grains Metal Erosion. Research Report. Tallinn 1961;25 (in Estonian).
Kleis I. and Remi T. Adapting the energetic erosion theory to hardened steels. Proc Estonian Acad Sc Eng 2004;10/1:45–52.
Kleis I. Probleme der Bestimmung des Strahlverschleisses bei Metallen. Wear 1969;13, 199–215.
Kleis I. About the erosion of metals. Proc Techn Univ Tallinn 1959;168:3–25 (in Russian).
Kleis I, Pappel T, and Arumäe H. Strahlverschleissuntersuchungen an modernen Konstruktionswerkstoffen. Wiss. Berichte Ingenierhochschule Zittau, 1982;383:64–66.
Beckmann G, Dierich P, Gellrich R, Gotzmann J, and Pietschmann F. Modelling of severe wear; asurvey of the contributions of the Technical University of Zittau to tribology. J Tribology International 1996;29/3:215–20.
Gotzmann J. Modellierung des Strahlverschleisses an keramischen Werkstoffen. Schmierungstechnik, Fachzeitschrift für Tribotechnik, Berlin: VEB Verlag Technik 1989;20/11:324–29.
Beckmann G, and Gotzmann J. Modelling blast wear on ceramic materials. Proc Techn Univ Tallinn 1985;609:102–9 (in Russian).
Greenwood DA. and Williamson JBP. Contact of nominally flat surfaces. Proc Roy Soc Lond, 1986;A295:300–19.
Evans AG, Gulden ME. and Rosenblatt M. Impact damage in brittle materials in elastic-plastic regime. Proc Roy Soc Lond, 1978;A361:343–65.
Sheldon GL, Finnie IJ. On the ductile behaviour of nominally brittle materials during erosive cutting. J of Engineering for Industry 1966;Nov:387–92.
Gulden ME. Solid-particle erosion of high-technology ceramics (Si3N4, glassbonded Al2O3 and MgF2). American Society for Testing and Materials. ASTM STP 664,1979;101–22.
Beckmann G, Dierich P. Tendenzdarstellungen von Mikrohärteverteilugen technischer Werkstoffe. Schmierungstechnik, Fachzeitschrift für Tribotechnik, VEB Verlag Technik Berlin 1989;20/12.
Kulu P. Principles of Creation of Erosion Wear Resistant Powder Materials and Coatings. Doctoral Thesis, Tallinn 1989 (in Russian).
Kulu P. Wear Resistance of Powder Materials and Coatings Tallinn: Valgus Publishers, 1988;119 (in Russian).
Kulu P, Veinthal R, and Käerdi H. Characterisation and modelling of erosion wear of powder composite materials and coatings. Int J Materials and Product Technology, 2007;28/3–4:425–447.
Ponton C, Rowlings R. Vickers indentation fracture toughness. Part 1; Test review of literature and formulation of standardised indendation thoughness equation. Mater Sci Tehnol 1989;5:865–72.
Veinthal R. Characterisation and modelling of Erosion Wear of Composite Materials and Coatings, PhD Thesis, TTU Press, 2005.
Wahl H. Verschleissprobleme in Braunkohlenbergbau. Braunkohle, Wärme u. Energie, 1951;3:75–87.
Khrushchov MM. and Babichev MA. Study of Metals Wear. Moscow: 1960;351 (in Russian).
Wellinger K. and Uetz H. Gleitverschleiss, Spülverschleiss, Strahlverschleiss unter der Wirkung von körnigen Stoffen. VDI-Forshungsheft, 1955;449/B21:1–40.
Wellinger K, Uetz H. and Gürleyik M. Gleitverschleiss-Untersuchungen an Metallen und nichtmetallischen Harstoffen unter wirkung körnigen Stoffen. Wear, 1968;11:173–99.
Tereshtshenko AF. and Gavrisch VA. About the abrasive selection for testing of surfacing to erosion. Abstracts of Tribological Conference. Kiev 1970;48–51 (in Russian).
Tadolder J. Erosion of Pure Metals. PhD Thesis. Tallinn 1966 (in Estonian).
Uetz H. and Khosrawi MA. Strahlverschleiss. Aufbereitungstechnik, 1980;21/5:253–66.
Stupnitsky A, Kleis I. and Rufanov Y. Wear characterictics of comercially pure metals in a grazing abrasive stream. Proc Techn Univ Tallinn 1981;381:23–32 (in Russian).
Kleis I. Grundlagen der Werkstoffauswahl bei der Bekämpfung des Strahlverschleisses. Werkstofftechnik, 1984;15:49–58.
Wellinger K. and Uetz H. Einfluss der Schweissbedingungen auf das Verschleissverhalten von Auftragschweissungen. Schweissen und Schneiden, 1960;12:465–72.
Katavic I. Untersuchungen über die Beeinflussung des Gefüges karbidischer Gusseisen bei abrasivet Verschleissbeanspruchung. Wear 1978;48:35–53.
Juzvenko J. and Paschenko M. The chromium carbide based alloys for mechanized surfacing. Automatic Welding 1969;3:24–28 (in Russian).
Rights and permissions
Copyright information
© 2008 Springer-Verlag London Limited
About this chapter
Cite this chapter
(2008). Development of Theories of Collision and Erosion. In: Solid Particle Erosion. Springer, London. https://doi.org/10.1007/978-1-84800-029-2_3
Download citation
DOI: https://doi.org/10.1007/978-1-84800-029-2_3
Publisher Name: Springer, London
Print ISBN: 978-1-84800-028-5
Online ISBN: 978-1-84800-029-2
eBook Packages: EngineeringEngineering (R0)