Advertisement

Vibration Monitoring and Control

Chapter
  • 1.9k Downloads
Part of the Advances in Industrial Control book series (AIC)

Abstract

Mechanical vibration in machines and equipment can occur due to many factors, such as unbalanced inertia, bearing failures on turbines, motors, generators, pumps, drives, turbofans, etc., poor kinematic design resulting in a non-rigid support structure, component failure and/or operations outside prescribed load ratings. The machine vibration signal can typically be characterised as a narrow-band interference signal anywhere in the range from 1 Hz to 500 kHz. To prevent equipment damage from the severe shaking that occurs when machines malfunction or vibrate at resonant frequencies, a real-time monitoring or control device is very useful. When the machine is used to perform highly precise positioning functions, undue vibrations can lead to poor repeatibility properties, impeding any systematic error compensation effort. This results directly in a loss of precision and accuracy achievable.

Keywords

Membership Function Finite Impulse Response Diagnostic Mode Vibration Signal Machine Structure 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Copyright information

© Springer-Verlag London Limited 2008

Personalised recommendations