Abstract
This study employs the commercial DEFORM™ 3D finite element analysis software to simulate superplastic blow-forming of titanium alloy (Ti-6Al-4V) sheet in an ellip-cylindrical die. The titanium sheet is assumed to be a rigid-plastic material with homogeneous and isotropic properties. The model of the ellip-cylindrical die and titanium sheet is constructed using three-dimensional solid elements. Simulations are performed to investigate the effects of shear friction, sheet temperature, die height and length of the die’s short axis on the thickness, effective stress, effective strain and critical damage characteristics of the formed sheet. The Taguchi method is then applied to optimize the processing parameters for the superplastic blow-forming process such that the thickness of the formed titanium sheet is optimal average distribution. The simulation results confirm the effectiveness of the Taguchi method in identifying the optimal blow-forming processing parameters for the current Ti-6Al-4V titanium alloy sheet.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Miller, Q.S., White, J., in Superplasticity in Aerospace, Heikkenen, H.C., McNelley (Eds.), T.R., AIME, PA, Warrendate, 1988, USA, P211.
Al-Naib, T.Y.M., Duncan, J.L., 1970, Superplastic Metal Forming, Int. J. Mech. Sci., Vol.12, P463–477.
Cornfield, G.C., Johnson, R.H., 1970, The Forming of Superplastic Sheet Metal, Int. J. Mech. Sci., Vol.12, P479–490.
Holt, D.L., 1970, An Analysis of the Bulging of a Superplastic Sheet by Lateral Pressure, Int. J. Mech. Sci., Vol.12, P491–497.
Hwang, Y.M., Lay, H.S., Huang, J.C., 2002, Study on Superplastic Blow-forming of 8090 Al-Li Sheets in an Ellip-cylindrical Closed-die, International Journal of Machine Tools & Manufacture, Vol.42, P1363–1372.
Senthil Kumar, V.S., Viswanathan, D., Natarajan, S., 2006, Theoretical Prediction and FEM Analysis of Superplastic Forming of AA7475 Aluminum Alloy in a Hemispherical Die, Journal of Materials Processing Technology, Vol.173, P247–251.
Hwang, Y.M., Yang, J.S., Chen, T.R., Huang, J.C., Wu, W.U., 1998, Analysis of Superplastic Blow-forming in a Conical Closed Die, Int. J. Mech. Sci. Vol.40, No.9, P867–885.
Hwang, Y.M., Yang, J.S., Chen, T.R., Huang, J.C., 1997, Analysis of Superplastic Sheet-metal Forming in a Circular Closed-die Considering Non-uniform Thinning, Journal of Materials Processing Technology, Vol.65, P215–227.
Bonet, J., Wood, R.D., Collins, R., 1994, Pressure-control Algorithms for the Numerical Simulation of Superplastic Forming, Int. J. Mech. Sci., Vol.36, No.4, P297–309.
Kim, Y.H., Lee, J.M., Hong, S.S., 2001, Optimal Design of Superplastic Forming Processes, Journal of Materials Processing Technology, Vol.112, P166–173.
Yarlagadda, P.K.D.V., Gudimetla, P., Adam, C., 2002, Finite Element Analysis of High Strain Rate Superplastic Forming (SPF) of Al-Ti Alloys, Journal of Materials Processing Technology, Vol.130–131, P469–476.
Huang, A., Lowe, A., Cardew-Hall, M.J., 2001, Experimental Validation of Sheet Thickness Optimisation for Superplastic Forming of Engineering Structures, Journal of Materials Processing Technology, Vol.112, P136–143.
Lee, K.S., Huh, H., 1999, Simulation of Superplastic Forming/diffusion Bonding with Finite-element Analysis using the Convective Coordinate System, Journal of Materials Processing Technology, Vol.89–90. P92–98.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer-Verlag London Limited
About this paper
Cite this paper
Chen, DC., Lin, JY., Jheng, MW., Chen, JM. (2007). Design of Titanium Alloy Superplastic Blow-forming in Ellip-cylindrical Die Using Taguchi Method. In: Hinduja, S., Fan, KC. (eds) Proceedings of the 35th International MATADOR Conference. Springer, London. https://doi.org/10.1007/978-1-84628-988-0_23
Download citation
DOI: https://doi.org/10.1007/978-1-84628-988-0_23
Publisher Name: Springer, London
Print ISBN: 978-1-84628-987-3
Online ISBN: 978-1-84628-988-0
eBook Packages: EngineeringEngineering (R0)