Abstract
In general thermoplastic polymers are made up of long linear chain molecules which exhibit large scale chain mobility and deformation under shear forces above their softening temperature. This change is reversible. Above this temperature the thermal motions of the chain segments are sufficient to overcome inter- and intra-molecular forces. At room temperature the material is a viscoelastic solid. Their behaviour is dependent on chain morphology, structure, crystallinity and the types of additives added (often to aid processing). The materials can easily be processed into different type of products and are considered to be the most important class of plastic materials commercially available. The proeessability of this class of plastics is a key characteristic for developing biomedical applications.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Black, J. (ed.) (1992), in Biological Performance of Materials: Fundamentals of Biocompatibility, Second edition, Marcel Dekker. Inc, New York.
Brydson, J.A (ed.), Plastics Materials, Butterworths Scientific, fourth edition, 1982; fifth edition, 1989.
Carhart, RO. (1985) Polycarbonate, in Engineering Thermoplastics, Properties and Applications, Margolis, J.M. (ed.), Chapter 3, pp. 29–82..
Chapman, RD. and Chroma, J.L. (1985) Nylon plastics, in Engineering Thermoplastics, Properties and Applications, Margolis J.M. (ed.), pp. 83–122.
Charrier, J.M. (ed.) (1990) Polymeric Materials and Processing: Plastics, Elastomers and Composites, Hanser.
Domininghaus, H. (ed.) (1993) Plastics for Engineers, Materials Properties, Applications, Car-Hanser Verlag.
Goodman, S.B. and Fomasier, V.L. (1992) Clinical and experimental studies in the biology of aseptic loosing of joint arthroplasties and the role of polymer particles, in Particulate Debris from Medical Implants: Mechanisms of Formation and Biological Consequences, ASTM ATP 1144, K.R St John, (ed), American Society for Testing and Materials, Philadelphia, pp. 27–37.
Harper, C.A (eds) (1992) Handbook of Plastics, Elastomers, and Composites, McGraw-Hill.
How, T.V. (1992) Mechanical properties of arteries and arterial grafts, in Cardiovascular Biomaterials, Hastings, G.W. (ed.), Springer-Verlag, London, pp.1–35.
Jones, AJ. and Denning, N.T. (1988) in Polymeric Biomaterials: Bio- and Ecocompatible Polymers, A Perspective for Australia, Department of Industry, Technology and Commerce.
Lilley, P.A, Blunn, G.W., and Walker, P.S. (1993) Wear performance of PEEK as a potential prosthetic knee joint material, in 7th International Conference on Polymers in Medicine and Surgery, 1–3 September 1993, Leeuwenhorst Congress Center, Noordwijkerhout, The Netherlands, pp. 320–326.
Margolis, J.M. (1985) Engineering Thermoplastics: Properties and Applications, Dekker, New York.
Mascia, L. (1989), in Thermoplastics: Materials Engineering, Second Edition, Elsevier Applied Science, London and New York.
McMillin, C.R (1994) Elastomers for biomedical applications, Rubber Chem. and Tech. 67, 417–446.
Park, J.B. and Lakes, RS. (1992) Biomaterials, an Introduction, Second Edition, Plenum Press, New York and London.
Rubin, 1.1. (ed.) (1990), Handbook of Plastic Materials and Technology, John Wiley & Son.
Staudinger, H. (1932) Die Hochmolekularen Organischer Verbindungen, Julius Springer.
Stokes, K., McVenes, R., and Anderson, J.M. (1995) Polyurethane elastomer biostability, J. Biomaterials Applications, 9, 321–355.
Szycher, M. (1991) in Blood Compatible Materials and Devices: Perspectives Towards the 21st Century, Sharma, C.P. and Szycher, M. (eds), Technomic Publishing CO., Inc., Lancaster, Basel, pp. 33–85.
Teoh, S.H., Lim, S.c., Yoon, E.T., and Goh, K.S. (1994a) A new method for in vitro wear assessment of materials used in mechanical heart valves, in Biomaterials Mechanical Properties, ASTM STP 1173, H.E. Kambic and AT. Yokobori, Jr. (eds), American Society for Testing and Materials, Philadelphia, pp.43–52.
Teoh, S.H., Martin, R.L., Lim, S.c., et al. (1990) Delrin as an occIuder material, ASAIO Transactions, 36, M417–421.
Watson, M., Cebon, D., Ashby, M., Charlton, C., and Chong, W.T. (eds) (1994) Cambridge Materials Selector V2.02, National University of Singapore, Granta Design Ltd.
Wenz, L.M., Merritt, K., Brown, S.A, and Moet, A (1990) In-vitro biocompatibility of polyetheretherketone and polysulphone composites, J. Biomed. Maters Res., 24, 207–215.
Ziegler, K.E. (1955) Angew. Chem. 67(426),541.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer Science+Business Media New York
About this chapter
Cite this chapter
Teoh, S.H., Tang, Z.G., Hastings, G.W. (2016). Chapter 3 Thermoplastic Polymers In Biomedical Applications: Structures, Properties and Processing. In: Murphy, W., Black, J., Hastings, G. (eds) Handbook of Biomaterial Properties. Springer, New York, NY. https://doi.org/10.1007/978-1-4939-3305-1_19
Download citation
DOI: https://doi.org/10.1007/978-1-4939-3305-1_19
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4939-3303-7
Online ISBN: 978-1-4939-3305-1
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)