Abstract
Electrogalvanizing is a specialized area of zinc electrodeposition. Simply stated, it is the electrodeposition of zinc on a continuously moving strip or wire. The term “galvanizing” refers to the coating of iron or steel with zinc. Originally, the popular usage of “galvanizing” referred to the continuous coating of strip or wire with zinc. The primary process was passage of the strip through a molten zinc bath, specifically known as “hot-dip galvanizing.” With the advent of electrolytic deposition, the parallel term “electrogalvanizing” evolved.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
E. W. Horvick, Plating 46 (1959) 639.
R. Steele, Met. Finish. 45 (12) (1947) 71.
G. Dubpernell, Met. Finish. 76 (1) (1978) 33.
A. Herman, Ostwald’s Klassiker (New Series), Vol. 2, Akademische Verlagsgesellschaft, Frankfurt; Johnson Reprint Corp., New York, 1968.
H. Geduld, Zinc Plating, Finishing Publications, Ltd., and ASM International, Metals Park, Ohio, 1988.
W. Blum, F. J. Liscomb, and C. M. Carson, National Bureau of Standards Technical Paper 195, National Bureau of Standards, Gaithersburg, Maryland, 1921.
R. H. Bumson, U.S. Patent 3,227, 638 (1966).
J. Korpiun and H. J. Steeg, German Patent 1, 521, 029 (1966).
W. Lankford, The Making, Shaping and Treating of Steel, Tenth Edition, USX Corporation and the Association of Iron and Steel Engineers, Pittsburgh, 1985.
M. Schiotter, Galvanostegie II Teil. Uber besondere Einrichtungen zum Plattieren (Electroplating Volume II. On Special Equipment for Plating), Wilhelm Knapp, 1911.
M. Miller, U.S. Patent 34, 640 (1862).
T. Edison, U.S. Patent 821, 622 (1906).
A. K. Graham and S. S. Johnson, in Electroplating Engineering Handbook,4th ed., Ed. by L. J. Durney, Van Nostrand Reinhold, New York, 1984, p. 617.
L. H. Winkler, Wire and Wire Products 16 (1941) 687.
R. M. Wick, U.S. Patent 2,392, 075 (1946).
E. H. Lyons, Jr., Trans. Electrochem. Soc. 78 (1940) 318.
J. H. Lindsay, R. F. Paluch, H. D. Nine, V. R. Miller, and T. J. O’Keefe, Plating Surf. Finish. 76 (3) (1989) 62.
T. Roberts, T. Heckard, and E. Williams, in Proceedings of the Fifth AESF Continuous Plating Seminar, Dearborn, Michigan, May 5–7, 1987, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1987.
W. Carter, R. Price, and R. Steinbicker, in Proceedings of the Fifth AESF Continuous Plating Seminar, Dearborn, Michigan, May 5–7, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1987.
B. Meuthen, in Proceedings of the International Conference on Zinc and Zinc Alloy Coated Steel Sheet, GALVATECH ‘89, Keidanren Kaikan, Tokyo, September 5–7, Iron and Steel Institute of Japan, Tokyo, 1989, p. 91.
B. Meuthen, J. Meyer zu Bexten, and D. Wollhard, in Proceedings of the Fifth AESF Continuous Plating Seminar, Dearborn, Michigan, May 5–7, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1987.
T. Hada, in Proceedings of the International Conference on Zinc and Zinc Alloy Coated Steel Sheet, GALVATECH ‘89, Keidanren Kaikan, Tokyo, September 5–7, 1989, Iron and Steel Institute of Japan, Tokyo, 1989, p. 111.
A. Komoda, A. Matsuda, T. Yoshihara, and H. Kimura, in Proceedings of the Fourth AESF Continuous Plating Seminar, Chicago, May 1–3, 1984, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1984.
T. Irie, K. Kyono, H. Kimura, T. Honjo, K. Yamoto, T. Yoshihara, and A. Matsuda, in Proceedings of the Fourth AESF Continuous Plating Seminar, Chicago, May 1–3, 1984, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1984.
H. Hahn, D. Vernon, and K. Watanabe, in Proceedings of the Fifth AESF Continuous Plating Seminar, Dearborn, Michigan, May 5–7, 1987, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1987.
F. Kuhaneck and M. Terry, in Proceedings of the Fifth AESF Continuous Plating Seminar, Dearborn, Michigan, May 5–7, 1987, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1987.
M. Morimoto, T. Tanaka, J. Oka, N. Ando, S. Ayusawa, Y. Murai, and Y. Kitazawa, in Proceedings of the Second AESF Continuous Plating Seminar, Chicago, January 24–26, 1977, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1977, p. 5.
G. Colin and A. Klein, in Proceedings of the Fifth AESF Continuous Plating Seminar, Dearborn, Michigan, May 5–7, 1987, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1987.
R. Nourri, K. Yanagawa, Y. Hoboh, H. Nagasaki, and T. Kurimoto, in Proceedings of the Fourth AESF Continuous Plating Seminar, Chicago, May 1–3, 1984, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1984.
T. Nonaka, H. Oishi, H. Nagasaki, S. Shoda, A. Shibuya, and T. Hattori, in Proceedings of the Fifth AESF Continuous Plating Seminar, Dearborn, Michigan, May 5–7, 1987, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1987.
R. Higgs, W. Johnson, and S. Bennett, in Proceedings of the Fifth AESF Continuous Plating Seminar, Dearborn, Michigan, May 5–7, 1987, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1987.
Electrolytic Galvanizing Facilities,Double Eagle Steel Coating Company, Dearborn, Michigan, 1986.
L. W. Austin and J. H. Lindsay, AESF Illustrated Lecture Series: Continuous Steel Strip Electroplating, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1989.
A. Komoda, in Proceedings of the International Conference on Zinc and Zinc Alloy Coated Steel Sheet, GALVATECH ‘89, Keidanren Kaikan, Tokyo, September 5–7, 1989, Iron and Steel Institute of Japan, Tokyo, 1989, p. 170.
F. Falcioni, P. Miceli, and S. Ramundo, in Proceedings of the Sixth AESF Continuous Plating Seminar, Pittsburgh, May 8–10, 1990, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1990.
K. L. Hardee, L. K. Mitchell, and E. J. Rudd, Plat. Surf. Finish. 76 (4) (1989) 66.
C. Bowen, P. Claessens, and S. Belisle, in Proceedings of the Sixth AESF Continuous Plating Seminar, Pittsburgh, May 8–10, 1990, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1990.
A. Weymeersch and L. Renard, in Proceedings of the Fourth AESF Continuous Plating Seminar, Chicago, May 1–3,1984, American Electroplaters’ and Surface Finisher’s Society, Orlando, Florida, 1984.
A. Komoda, A. Matsuda, T. Yoshihara, and H. Kimura, in Proceedings of the Fourth AESF Continuous Plating Seminar, Chicago, May 1–3, 1984, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1984.
W. R. Johnson and L. E. Pfister, in Proceedings of the Fourth AESF Continuous Plating Seminar, Chicago, May 1–3, 1984, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1984.
R. Noumi. K. Yanagawa, Y. Hoboh, H. Nagasaki, and G. T. Kurimoto, in Proceedings of the Fourth AESF Continuous Plating Seminar, Chicago, May 1–3, 1984, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1984.
S. G. Fountoulakis, R. N. Steinbicker, and T. W. Fisher, in Proceedings of the Fourth AESF Continuous Plating Seminar, Chicago, May 1–3, 1984, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1984.
T. Irie, L. Kyono, H. Kimura, T. Honjo, K. Yamato, T. Yoshihara, and A. Matsuda, in Proceedings of the Fourth AESF Continuous Plating Seminar, Chicago, May 1–3, 1984, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1984.
T. Andaniya, in Proceedings of the Fourth AESF Continuous Plating Seminar, Chicago, May 1–3, 1984, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1984.
M. Thorogood, in Proceedings of the Sixth AESF Continuous Plating Seminar, Pittsburgh, May 8–10, 1990, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1990.
T. Hamano, in Proceedings of the Sixth AESF Continuous Plating Seminar, Pittsburgh, May 8–10, 1990, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1990.
G. W. Loar, K. R. Romer, and T. J. Aoe, Plat. Surf. Finish. 70 (3) (1991) 74.
J. McBreen and E. J. Cairns, in Advances in Electrochemistry and Electrochemical Engineering, Vol. 11, Ed. by H. Gerischer and C. W. Tobias, Wiley Interscience, New York, 1978, p. 273.
I. Epelboin, M. Ksouri, and R. Wiart, J. Electrochem. Soc. 122 (9) (1975) 1206.
E. R. Cole, Ph.D. Thesis, University of Missouri—Rolla, 1970.
H. Fukushima, in Proceedings of the International Conference on Zinc and Zinc Alloy Coated Steel Sheet, GALVATECH ‘89, Keidanren Kaikan, Tokyo, September 5–7, 1989, Iron and Steel Institute of Japan, Tokyo, 1989, p. 19.
F. A. Lowenheim, Modern Electroplating, McGraw-Hill, New York, 1978, p. 142.
R. Winand, in Proceedings of the International Conference on Zinc and Zinc Alloy Coated Steel Sheet, GALVATECH ‘89, Keidanren Kaikan, Tokyo, September 5–7, 1989, Iron and Steel Institute of Japan, Tokyo, 1989, p. 27.
S. Alota, N. Azzeri, R. Bruno, M. Memmi, and S. Ramundo, Metall. Ital. 79 (3) (1987) 217.
T. R. Roberts and F. H. Guzzetta, in Proceedings of the Fifth AESF Continuous Plating Seminar, Dearborn, Michigan, May 5–7, 1987, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1987.
S. F. Chen, J. S. Cuzmar, T. J. O’Keefe, E. R. Cole, V. R. Miller, and J. H. Lindsay, in Proceedings of the Fifth AESF Continuous Plating Seminar, Dearborn, Michigan, May 5–7, 1987, American Electroplaters’ and Surface Finishers’ Society, Orlando, Florida, 1987.
V. Jiricny, H. Choi, and J. W. Evans, J. Appl. Electrochem. 17 (1987) 91.
I. Tomov, Chr. Cvetkova, V. Velinov, A. Riesenkampf, and B. Pawlik, J. Appl. Electrochem. 19 (1989) 377.
S. J. Shaffer, W. E. Nojima, P. N. Skarpelos, and J. W. Morris, in Zinc-Based Steel Coating Systems: Metallurgy and Performance, Ed. by G. Krauss and D. K. Matlock, The Minerals, Metals and Materials Society, Warrendale, Pennsylvania, 1990, p. 251.
S. J. Shaffer, J. W. Morris. Wenk, in Zinc-Based Steel Coating Systems: Metallurgy and Performance, Ed. by G. Krauss and D. K. Matlock, The Minerals, Metals and Materials Society, Warrendale, Pennsylvania, 1990, p. 129.
S. J. Shaffer, A. M. Philip, and J. W. Morris, Jr., in Proceedings of the International Conference on Zinc and Zinc Alloy Coated Steel Sheet, GALVATECH ‘89, Keidanren Kaikan, Tokyo, September 5–7, 1989, Iron and Steel Institute of Japan, Tokyo, 1989, p. 338.
A. Brenner, Electrodeposition of Alloys—Principles and Practice, Vols. I and II, Academic Press, New York, 1963.
D. E. Hall, Plat. Surf. Finish. 70 (11) (1983) 59.
S. Swathirajan, J. Electroanal. Chem. 221 (1987) 211.
S. Swathirajan and Y. M. Mikhail, J. Electrochem. Soc. 136 (2) (1989) 374.
S. Swathirajan and Y. M. Mikhail, J. Electrochem. Soc. 136 (8) (1989) 2188.
S. G. Denner, in Proceedings of the International Conference on Zinc and Zinc Alloy Coated Steel Sheet, GALVATECH ‘89, Keidanren Kaikan, Tokyo, September 5–7, 1989, Iron and Steel Institute of Japan, Tokyo, 1989, p. 101.
R. Winand, Surf. Coat. Technol. 37 (1989) 65.
C. R. Shastry and H. E. Townsend, Corrosion 45 (2) (1989) 103.
Y. L. Chen and D. D. Snyder, in Zinc-Based Steel Coating Systems: Metallurgy and Performance, Ed. by G. Krauss and D. K. Matlock, The Minerals, Metals and Materials Society, Warrendale, Pennsylvania, 1990, p. 95.
A. Weymeersch, R. Winand, and L. Renard, Plat. Surf. Finish. 68 (4) (1981) 56.
J. Ting, D. Duffy, R. Y. Lin, F. H. Guzzetta, and T. Roberts, in Proceedings of the International Conference on Zinc and Zinc Alloy Coated Steel Sheet, GALVATECH ‘89, Keidanren Kaikan, Tokyo, September 5–7, 1989, Iron and Steel Institute of Japan, Tokyo, 1989, p. 178.
A. Weymeersch, R. Winand, and L. Renard, Plat. Surf. Finish. 68 (5) (1981) 118.
E. Mattsson, Mater. Perform. 21 (7) (1982) 9.
V. Kucera and E. Mattsson, in Corrosion Mechanisms, Ed. by F. Mansfield, Marcel Dekker, New York, 1987, p. 255.
K. Barton, Schutz Gegen Atmospharische Korrosion, Verlag Chemie, Weinheim, 1972.
R. Grauer and W. Feitknecht, Corros. Sci. 7 (1969) 629.
A. T. Gwathmey, in Corrosion Handbook, Ed. by H. Uhlig, John Wiley & Sons, New York, 1948, p. 33.
D. Abayarathna, E. B. Hale, T. J. O’Keefe, Y. M. Wang, and D. Radovic, Corros. Sci. 32 (7) (1991) 755.
T. O’Keefe, University of Missouri—Rolla, private communication, April 12, 1991.
R. D. Granata, in Proceedings of NACE Annual Conference, CORROSION ‘81, Cincinnati, March 11–15, 1991, Paper # 382, National Association of Corrosion Engineers, Houston, 1991.
H. Leidheiser, Jr. and W. Wang, J. Coat. Tech. 53 (1981) 77.
J. H. Lindsay and C. R. Shastry, in Proceedings of the AESF Annual Technical Conference, Anaheim, Dearborn, Michigan, June 21–25, 1993, American Electroplaters’ and Surface Finishers’ Society, Orlando, Flordia, 1993.
M. R. Lambert, R. G. Hart, and H. E. Townsend, SAE Technical Paper No. 831817, Society of Automotive Engineers, Warrendale, Pennsylvania, 1983.
H. H. Lee, in Zinc-Based Steel Coating Systems: Metallurgy and Performance, Ed. by G. Krauss and D. K. Matlock, The Minerals, Metals and Materials Society, Warrendale, Pennsylvania, 1990, p. 157.
F. A. Lowenheim, Electroplating, McGraw-Hill, New York, 1977, p. 442.
W. Rausch, in Proceedings of the International Conference on Zinc and Zinc Alloy Coated Steel Sheet, GALVATECH ‘89, Keidanren Kaikan, Tokyo, September 5–7, 1989, Iron and Steel Institute of Japan, Tokyo, 1989, p. 197.
G. Lorin, Phosphating of Metals, Finishing Publications Ltd., Hampton Hill, Middlesex, England, 1974, p. 20.
G. Lorin, Phosphating of Metals, Finishing Publications Ltd., Hampton Hill, Middlesex, England, 1974, p. 57.
G. Lorin, Phosphating of Metals, Finishing Publications Ltd., Hampton Hill, Middlesex, England, 1974, p. 65.
J. H. Lindsay, in Zinc-Based Steel Coating Systems: Metallurgy and Performance, Ed. by G. Krauss and D. K. Matlock, The Minerals, Metals and Materials Society, Warrendale, Pennsylvania, 1990, p. 281.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1994 Springer Science+Business Media New York
About this chapter
Cite this chapter
Lindsay, J.H., O’Keefe, T.J. (1994). Electrogalvanizing. In: Conway, B.E., Bockris, J.O., White, R.E. (eds) Modern Aspects of Electrochemistry. Modern Aspects of Electrochemistry, vol 26. Springer, Boston, MA. https://doi.org/10.1007/978-1-4899-1733-1_4
Download citation
DOI: https://doi.org/10.1007/978-1-4899-1733-1_4
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4899-1735-5
Online ISBN: 978-1-4899-1733-1
eBook Packages: Springer Book Archive