A Comparison of Calpuff Modeling Results With 1977 Inel Field Data Results
CALPUFF is a non-steady-state, multi-layer puff dispersion model that simulates the effects of time and space varying meteorological conditions. The puff modeling simulation results are compared with data obtained following a single 3-hour late-afternoon tracer release conducted on April 19, 1977 near Idaho Falls, Idaho, USA. Samplers were positioned on arcs at downwind distances of 3.2, 48 and 90 km. Low-level instrumented masts provided hourly values of wind and temperature at 17 sites within the experimental area. Hourly rawindsondes were available 600 m northwest of the release point. And hourly pibals provided winds aloft at three other sites within the area. In this discussion, alternative combinations of the available meteorological data were used to assess the differences to be seen in the simulation results. Analysis of the results suggests that the simulated lateral dispersion along each arc was best characterized when all of the surface and upper wind observations were used and that the position of the simulated maximum on each arc was poorly characterized regardless of data used.
KeywordsWind Field Cylinder Sample Vertical Dispersion Lateral Dispersion Similarity Dispersion
Unable to display preview. Download preview PDF.
- Clements, W.E (ed.)., 1979: Experimental Design and Data of the April 1977 Multitracer Atmospheric Experiment at the Idaho National Engineering Laboratory, Los Alamos Scientific Laboratory Informal Report, LA-7795-MS/UC-11, Los Alamos, NM 87545, U.S.A., 100 pp.Google Scholar
- Douglas, S., and R. Kessler, 1988: User’s guide to the diagnostic wind field model (Version 1.0). Systems Applications, Inc., San Rafael, CA, 48 pp.Google Scholar
- U.S. Environmental Protection Agency, 1995a: A User’s Guide for the CALMET Meteorological Model. EPA-454/B-95-002, Office of Air Quality Planning and Standards, Research Triangle Park, NC 273 pp.Google Scholar
- U.S. Environmental Protection Agency. 1995b: A User’s Guide for the CALPUFF Dispersion Model. EPA-454/B-95-006, Office of Air Quality Planning and Standards, Research Triangle Park, NC 338 pp.Google Scholar
- U.S. Environmental Protection Agency, 1996: CALMET, CALPUFF and CALPOST Modeling System, PB 96-502-083INC (CD ROM and diskette). National Technical Information Service, U.S. Department of Commerce, Springfield, VA, 22161.Google Scholar