Advertisement

Effects of Specimen Thickness and Side-Groove on Fracture Toughness of JN1 Austenitic Stainless Steel Rolled Plate at Liquid Helium Temperature

  • Y. Shindo
  • K. Horiguchi
  • T. Kobori
  • H. Nakajima
  • H. Tsuji
Part of the Advances in Cryogenic Engineering Materials book series (ACRE, volume 42)

Abstract

In order to evaluate the fracture toughness (J IC ) of JN1 austenitic stainless steel rolled plate, we performed elastic-plastic fracture toughness tests with standard and modified compact tension specimens at liquid helium temperature. These tests were conducted in accordance with ASTM standards E813–81 and E813–87 for determining J IC using the unloading compliance method to monitor crack growth. The effects of specimen thickness and side-groove on J IC and tearing modulus (T mat ) are reported. The final value of physical crack extension was taken as the average of nine measurements using an optical microscope. Fracture surfaces were examined by scanning electron microscopy (SEM) to verify the failure mechanisms. The effects of crack tunneling on the determination of J-integral resistance curves and valid J IC values, and a difference between ASTM standards E813–81 and E813–87 are also discussed.

Keywords

Austenitic Stainless Steel Crack Front Crack Extension Specimen Thickness Compact Tension Specimen 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    K. Suemune, T. Sakamoto, T. Ogawa, T. Okazaki, S. Maefara, H. Nakajima and S. Shimamoto, Munufacture and properties of nitrogen-Containing Cr-Nn and Cr-Ni Austenitic Stainless Steels for Cryogenic Use, Advances in Cryogenic Engineering, 34:123 (1988),Google Scholar
  2. 2.
    Standard test Method for J IC, A Measure of Fracture Toughness, ASTM Designation E813–81, in:”1986 Annual Book of ASTM Standards,” American Society for Testing and Materials, Philadelphia (1986), p.822Google Scholar
  3. 3.
    K. Yoshida, H. Nakajima, M. Oshikiri, R. L. Tobler, S. Shimamoto, R. Miura and J. Ishizaka, Mechanical Tests of Large Specimens at 4K: Facilities and Results, Advances in Cryogenic Engineering, 34:225 (1988),Google Scholar
  4. 4.
    M. Shimada, R. L. Tobler, T. Shoji and H. Takahashi, Size, Side-grooving, and Fatigue Precracking Effects on J-integral Test results for SUS304 Stainless Steel at 4K, Advances in Cryogenic Engineering, 34:251 (1988),Google Scholar
  5. 5.
    T. Ogata, K. Ishikawa, T. Yuri, R. L. Tobler, R. T. Purtscher, R. P. Reed, T. Shoji, K. Nakano and H. Takahashi, Effects of Specimen Size, Side-grooving, and Precracking Temperature on J-integral Test Results for AISI 316LN at 4K, Advances in Cryogenic Engineering, 34:259 (1988).Google Scholar
  6. 6.
    Y. Wadayama, T. Matsumoto, H. Satoh and H. Takahashi, Effect of Specimen Size on Elastic-Plastic Fracture Toughness for SUS316LN at Cryogenic Temperature, Cryogenics Engineering, 23–2:78 (1987),Google Scholar
  7. 7.
    Standard test Method for J IC, A Measure of Fracture Toughness, ASTM Designation E813–87, in:”1987 Annual Book of ASTM Standards,” American Society for Testing and Materials, Philadelphia (1987), p.968Google Scholar
  8. 8.
    H. Nakajima, K. Yoshida, S. Shimamoto, R. L. Tobler, R. P. Reed, R. P. Walsh and P. T. Purtscher, Interlaboratory Tension and Fracture Toughness Test Results for CSUS-JN1 (Fe-25Cr-15Ni-0.35N) Austenitic Stainless Steel at 4K, Advances in Cryogenic Engineering, 36:1069 (1990).Google Scholar
  9. 9.
    A. Saxena and S. J. Hudak, Jr, Review and Extension of Compliance Information for Common Crack Growth Specimens, International Journal of Fracture, 14–5:453 (1978),Google Scholar
  10. 10.
    X. M. Chen and H. G. Hahn, Stress Structure and Deformation Behavior of Mode I Three-Dimensional Crack in Elastic-Plastic State, Engineering Fracture Mechanics, 44:895 (1993).CrossRefGoogle Scholar
  11. 11.
    P. C. Paris, H. Tada, A. Zahoor and H. Ernst, The Theory of Instability of the Tearing Mode of Elastic-Plastic Crack Growth, ASTM STP, 668:5 (1979).Google Scholar

Copyright information

© Springer Science+Business Media New York 1996

Authors and Affiliations

  • Y. Shindo
    • 1
  • K. Horiguchi
    • 1
  • T. Kobori
    • 1
  • H. Nakajima
    • 2
  • H. Tsuji
    • 2
  1. 1.Tohoku UniversitySendaiJapan
  2. 2.Naka Fusion Research EstablishmentJapan Atomic Energy Research InstituteNaka, IbaragiJapan

Personalised recommendations