Advertisement

Development of Bronze-Processed Nb3Sn Superconductors for 1GHz NMR Magnets

  • T. Miyazaki
  • N. Matsukura
  • T. Miyatake
  • M. Shimada
  • K. Takabatake
  • K. Itoh
  • T. Kiyoshi
  • A. Sato
  • K. Inoue
  • H. Wada
Part of the Advances in Cryogenic Engineering book series (ACRE, volume 44)

Abstract

To realize a 1GHz NMR magnet, superconductors with such features as high critical current, high n-value, high strength, enough weight of a continuous spool and so on are required. Two types of bronze-processed Nb3Sn superconductors have been developed. One is the conductor for the inner coil with high critical current density (overall Jc) of over 100 A/mm2 and n-value of over 20 at 21 T, 1.8 K, the other is the Ta reinforced conductor for the middle field coils with high yield strength of over 300 MPa at 4.2 K and the spool weight of more than 60 kg. Details of characteristics for these conductors are reported including overall Jc, n-value and mechanical properties.

Keywords

Critical Current Density High Yield Strength High Critical Current Density Cryogenic Engineer Bronze Matrix 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    K. Inoue, T. Takeuchi, A. Sato, K. Itoh, H. Wada, H. Maeda, R. Ogawa, Y. Kawate, K. Takabatake, T. Horiuchi, J. Kida, and K. Higuchi, “Development Project of 1 GHz NMR Spectrometer,” Proceedings of ICEC 16/ICMC, 1103, (1997).Google Scholar
  2. 2.
    K. Itoh, M. Yuyama, T. Kiyoshi, T. Takeuchi, K. Inoue, H. Maeda, T. Miyatake, and M. Shimada, “Development of NbTi and Nb3Sn Conductors for l GHz NMR Superconductor,” Proceedings of ICEC 16/1CMC, 1735, (1997).Google Scholar
  3. 3.
    T. Miyazaki, Y. Fukumoto, N. Matsukura, T. Miyatake, M. Shimada, and N. Kobayashi, “Improvement of Critical Current Density of Bronze-Processed Nb3Sn Superconducting Wire, Advances in Cryogenic Engineering,” Plenum Press, New York (1996), p. 1385.Google Scholar
  4. 4.
    T. Miyazaki, T. Miyatake, M. Shimada, H. Kurahashi, I. Tatara, and N. Kobayashi, “Comparison of properties between Bronze-Prosecced Nb3Sn Wires with Different Tin Content,” Proceedings of ICEC 16/ICMC, 1739, (1997).Google Scholar
  5. 5.
    “Constitution of binary alloys,” M. Hansen ed., McGraw-Hill, New York (1958), p. 633.Google Scholar
  6. 6.
    T. Miyazaki, N. Matsukura, T. Miyatake, M. Shimada, K. Takabatake, K. Itoh, T. Kiyoshi, and K. Inoue, “Improvement of Critical Current Density in the Bronze-Processed Nb3Sn Superconductor,” CEC/ICMC 1997, Portland, paper CP 7.Google Scholar
  7. 7.
    S. Iwasaki, K. Goto, N. Sadakata, T. Saito, O. Kohno, S. Awaji, K. Watanabe, “Mechanical and Superconducting Properties of Multifilamentary Nb3Sn Wire with CuNb Reinforced Stabilizer,” Proceedings of ICEC 16/ICMC, 1723, (1997).Google Scholar
  8. 8.
    S. Murase, S. Nakayama, K. Koyanagi, T. Masegi, S. Nomura, M. Urata, K. Shimamura, K. Amano, N. Shiga, K. Watanabe, and N. Kobayashi, “Development of the Alumina-Copper Reinforced Nb3Sn Wire for Coil Fabrication,” Proceedings of ICEC 16/ICMC, 1707, (1997).Google Scholar
  9. 9.
    H. Kurahashi, Y. Monju, M. Shimada, M. Taneda, S. Hayashi, R. Ogawa, and Y. Kawate, “The Characterization of Nb3Sn Conductors for High Field Magnet, Advances in Cryogenic Engineering,” Plenum Press, New York (1994), p. 861.Google Scholar

Copyright information

© Springer Science+Business Media New York 1998

Authors and Affiliations

  • T. Miyazaki
    • 1
  • N. Matsukura
    • 1
  • T. Miyatake
    • 1
  • M. Shimada
    • 1
  • K. Takabatake
    • 1
  • K. Itoh
    • 2
  • T. Kiyoshi
    • 2
  • A. Sato
    • 2
  • K. Inoue
    • 2
  • H. Wada
    • 2
  1. 1.Kobe Steel Ltd.KobeJapan
  2. 2.National Research Institute for MetalsTsukuba 305Japan

Personalised recommendations