Performance of Crycooler Shunt Heat Pipes

  • F. C. Prenger
  • D. D. Hill
  • D. E. Daney
  • M. A. Daugherty
  • G. F. Green
  • J. Chafe
  • M. Heiberger
  • A. Langhorn
Part of the Advances in Cryogenic Engineering book series (ACRE, volume 43)

Abstract

In many important cryogenic applications the use of liquid cryogens for system cooling is either not feasible or is unsuitable. In such cases a cryogenic refrigeration system or multi stage cryocooler must be employed to provide the necessary cooling. To shorten cooldown time for such a system, especially if the thermal mass is large, a thermal shunt directly connecting the first stage of the cryocooler to the load during cooldown is desirable. This thermal shunt allows effective utilization of the greater cooling power available from the first stage of the cryocooler early in the cooldown. Upon reaching operating temperature, the thermal shunt must exhibit a high resistance to thermally isolate the first stage of the cryocooler from the load. Heat pipes are well suited to achieve these objectives. The Advanced Lightweight Influence Sweep System (ALISS), under development by the U. S. Navy for shallow water magnetic mine countermeasures, employs a large, conductively cooled, superconducting magnet that must be cooled from 300 to 4.2 K. Cryogenic heat pipes acting as cryocooler thermal shunts are used to shorten the cooldown time. Ethane, nitrogen and oxygen were evaluated as possible working fluids. A thermal model of the ALISS was developed to evaluate the cooldown performance of various heat pipe combinations. In conjunction with heat pipe performance tests, this model was used to select a suitable design for the heat pipe thermal shunts.

Keywords

Total Heat Beach Boiling Refrigeration 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    E. M. Golda, J. D. Walters and G. F. Green; “Applications of Superconductivity to Very Shallow Water Mine Sweeping,” Naval Engineers Journal, May 1992.Google Scholar
  2. 2.
    M. Heiberger, et al., “A Light-Weight Rugged Conduction-Cooled NbTi Superconducting Magnet for U.S. Navy Minesweeper Applications,” Cryogenic Engineering Conference, Columbus, OH, July, 1995.Google Scholar
  3. 3.
    F. C. Prenger, et al., “Heat pipes for Advanced Cooldown of Cryogenic Systems,” 9th Cryocooler Conference, Waterville Valley, NH, June, 1996.Google Scholar
  4. 4.
    K. A. Woloshun, et al., “HTPIPE: A Steady-State Heat Pipe Analysis Program”, Los Alamos National Laboratory internal report no. LA-11324-M, Nov. 1988.Google Scholar
  5. 5.
    Rohsenow, W.H., and Choi, H; Heat Mass and Momentum Transfer; Prentice-Hall, Inc., Englewood Cliffs NJ, 1963.Google Scholar
  6. 6.
    Rohsenow, W.M.; “A Method of Correlating Heat Transfer Data for Surface Boiling of Liquids,” Trans ASME, July 1952.Google Scholar

Copyright information

© Springer Science+Business Media New York 1998

Authors and Affiliations

  • F. C. Prenger
    • 1
  • D. D. Hill
    • 1
  • D. E. Daney
    • 1
  • M. A. Daugherty
    • 1
  • G. F. Green
    • 2
  • J. Chafe
    • 2
  • M. Heiberger
    • 3
  • A. Langhorn
    • 4
  1. 1.Los Alamos National LaboratoryLos AlamosUSA
  2. 2.Naval Surface Warfare CenterAnnapolisUSA
  3. 3.General AtomicsSan DiegoUSA
  4. 4.StartechSolana BeachCAUSA

Personalised recommendations