Advertisement

Steady State Heat Transfer Characteristics in He I with Different Surface Area

  • A. Iwamoto
  • R. Maekawa
  • T. Mito
  • J. Yamamoto
Part of the Advances in Cryogenic Engineering book series (ACRE, volume 43)

Abstract

Accuracy of stability analyses for pool boiling superconductors depends on heat transfer from the conductor surface to liquid helium. Previously, many heat transfer measurements from copper plates have been reported.1–4 These heat transfer surfaces were different in size and in condition. At the same heat flux, as surface area increases, the quantity of bubbles is also increasing. Free convection in the liquid helium around the surface is considered to be influenced by bubbles. It is assumed that various surface areas take different heat transfer characteristics. In this paper, the heat transfer of copper plates has been measured as a function of heat transfer surface area. We studied four types of heat transfer surface areas including : a) 10 × 18 mm, b) 18 × 18 mm, c) 40 × 18 mm, and d) 76 × 18 mm. The surface roughness is less than 10 μm. It is well-known that the heat transfer characteristics depend on surface orientation. To estimate the dependence for these samples in this study, the surface orientation was changed from 0°(horizontal, heat transfer surface upward), through 90°(vertical), to 180°(horizontal, downward) at the interval of 15°. The dependence of the heat transfer characteristics on the surface areas is discussed.

Keywords

Heat Transfer Heat Flux Heat Transfer Coefficient Free Convection Liquid Helium 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    D. N. Lyon, Boiling heat transfer and peak nucleate boiling fluxes in saturated liquid helium between the 1 and critical temperature, in: “Advances in Cryogenic Engineering Vol.10,” Plenum Press, New York (1965),p.371.Google Scholar
  2. 2.
    Z. Chen, et al. Channel heat transfer in He II — steady state orientation dependence, Cryogenics Vol.27:635 (1987).CrossRefGoogle Scholar
  3. 3.
    G. R. Chandratilleke, et al., Pool boiling heat transfer to saturated liquid helium from coated surface, Cryogenics Vol.29:588 (1989).CrossRefGoogle Scholar
  4. 4.
    A. Iwamoto, et al., Heat transfer from an oxidized large copper surface to liquid helium: dependence on surface orientation and treatment, in: “Advances in Cryogenic Engineering Vol.41,” Plenum Press, New York (1996), p.217.CrossRefGoogle Scholar
  5. 5.
    Steven W. Van Sciver, Pool boiling Hel heat transfer, in: “Helium Cryogenics”, Plenum Press, New York (1986), p.199.Google Scholar
  6. 6.
    S. Nishio, et al., Natural-convection film boiling heat transfer (1st report, saturated film boiling with long vapor film), Transaction of The Japan Society of Mechanical Engineers B Vol.56:1484 (1990) (in Japanese).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media New York 1998

Authors and Affiliations

  • A. Iwamoto
    • 1
  • R. Maekawa
    • 1
  • T. Mito
    • 1
  • J. Yamamoto
    • 1
  1. 1.National Institute for Fusion ScienceToki, GifuJapan

Personalised recommendations