Advertisement

Horn Systems

  • John Eargle
Chapter

Abstract

The history of the horn as an acoustic device dates to antiquity. Early man used hollowed animal horns for signaling over long distances, and in time the horn became the basis of a number of musical instruments.

Keywords

Section View Pattern Control Ring Radiator Secondary Resonance Bell Telephone Laboratory 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Bibliography and References

  1. Beranek, L, Acoustics, John Wiley & Son, New York (1954), reprinted by ASA 1993.Google Scholar
  2. Eargle, J., Electroacoustical Reference Data, Kluwer Academic Publishers, Boston (1994).Google Scholar
  3. Edgar, B., “The Tractrix Horn Contour,” Speaker Builder, volume 2, 1981.Google Scholar
  4. Frayne, J. and Locanthi, B., “Theater Loudspeaker System Incorporating an Acoustic Lens Radiator,” J. Society of Motion Picture and Television Engineers, volume 63 (September 1954).Google Scholar
  5. Geddes, E., Audio Transducers, ISBN 0–9722085–0–X (2002).Google Scholar
  6. Henricksen, C. and Ureda, M., “The Manta-Ray Horns,”./. Audio Engineering Society, volume 26, number 9 (Sept 1978).Google Scholar
  7. Hilliard, J. and Clark, L, L “Headphones and Loudspeakers,” Chapter VII in Motion Picture Sound Engineering, D. Van Nostrand, New York (1938).Google Scholar
  8. JBL, Technical Note 1(7), Northridge, CA (1984). JBL, Technical Notes 1(8), Northridge, CA (1985).Google Scholar
  9. Johansen, T., “On the Directivity of Horn Loudspeakers,”./. Audio Engineering Society, vol. 42, no. 12 (1994).Google Scholar
  10. Keele, D, D., “What’s so Sacred about Exponential Horns?” presented at the 51st Convention of the AES, J. Audio Engineering Society (abstracts) vol. 23, p. 492 (1975); convention preprint 1038.Google Scholar
  11. Keele, D, D., “Low Frequency Horn Design Using Thiele-Small Driver Parameters,” presented at AES Convention, Los Angeles, CA, May 1977. Preprint number 1250.Google Scholar
  12. Keele, D. “Optimum Horn Mouth Sizes,” presented at the 46th AES Convention, New York, September 1973; convention preprint 933.Google Scholar
  13. Keele, D., U. S. Patent number 4,308, 932 (1982).Google Scholar
  14. Kinoshita, S., Locanthi, B., et al., “Design of a 48-mm Beryllium Diaphragm Compression Driver,” presented at AES 60th Convention, 2–5 May 1978 (Preprint number 1364 ).Google Scholar
  15. Kock, W., and Harvery, F., “Refracting Sound Waves,” J Acoustical Society of America, volume 21, number 5 (September 1949).Google Scholar
  16. Kinoshita, S. and Locanthi, B, B., “The Influence of Parasitic Resonances on Compression Driver Loudspeaker Performance,” Presented at AES 61st Convention, 3–6 November 1978 (Preprint number 1422 ).Google Scholar
  17. Klipsch P., “A Low-frequency Horn of Small Dimensions,” J. Acoustical Society of America, vol. 18, pp. 137–144 (1941).CrossRefGoogle Scholar
  18. Lansing, J. and Hilliard, J., “An Improved Loudspeaker System for Theaters,” J Society of Motion Picture Engineers, vol. 45, pp. 339–349 (1945).Google Scholar
  19. Locanthi, B., “Application of Electric Circuit Analogs to Loudspeaker Design Problems,” J Audio Engineering Society, vol. 19, p. 778–785 (1971).Google Scholar
  20. Olson, H. Acoustical Engineering, D. Van Nostrand, New York (1957), reprinted by Professional Acoustical Journals, 1991.Google Scholar
  21. Plach, D., “Design Factors in Horn-Type Speakers,” J. Audio Engineering Society, volume 1, number 4 (1953).Google Scholar
  22. Post, J. and Hixson, E, E., “A Modeling and Measurment Study of Acoustic Horns,” dissertation, University of Texas at Austin, Department of Electrical and Computer Engineering, May 1994.Google Scholar
  23. Salmon, V. “Hypex Horns,” Electronics, volume 14, p. 39 (1941). Smith, B. “A Distributed-Source Horn,” Audio Engineering, (Jan 1951).Google Scholar
  24. Smith, D., Keele, D., and Eargle, J., “Improvements in Monitor Loudspeaker Systems,” J Audio Engineering Society, volume 31, number 6 (June 1983).Google Scholar
  25. Wente, E. and Thuras, A., “Auditory Perspective: Loudspeakers and Microphones,” Electrical Engineering, January 1934.Google Scholar
  26. Voishvillo, A., and Surupov, S., U. S. Patent 5,537, 481 (1996)Google Scholar
  27. Thuras, A. “Extraneous Frequencies Generated in Air Carrying Intense Sound Waves,” J Acoustical Society of America, volume 6, pp. 173–180 (1935).MATHCrossRefGoogle Scholar
  28. Voigt, P., British Patent 278,098, British Patent 278,098, “Improvements in Horns for Acoustic Instruments,” 1927.Google Scholar

Copyright information

© Springer Science+Business Media New York 2003

Authors and Affiliations

  • John Eargle
    • 1
  1. 1.JME Consulting CorporationCanada

Personalised recommendations