Advertisement

Analysis of Facets and Other Surfaces Using Electron Backscatter Diffraction

  • Valerie Randle

Abstract

A facet is defined as ‘one side of a many-sided body.’ With regard to grains in a polycrystal, a facet can be an intergranular or transgranular fracture surface (Field 1997; Randle and Hoile, 1998; Randle, 1999), or the surface of a grain or phase boundary (Randle, 1997). Figure 23.1 shows the appearance of intergranular fracture surfaces in an aluminium alloy revealed as a result of liquid metal embrittlement by gallium. This is, of course, an unusual view of grain boundaries; usually they are revealed by etching a polished surface to show the trace of the grain boundary network. Frequently, fracture surfaces and grain boundaries have very specific crystallographic identities. This is also true of other planar features in materials, such as intergranular or transgranular microcracks, (Liu et al., 1992) or slip traces (Blochwitz et al., 1996; Lin and Pope, 1996; Raabe et al., 1997). It is possible to extend the capabilities of EBSD to obtain the crystallographic indices of these flat surfaces (i.e., planes). Such a strategy is a precursor to a three-dimensional view of microtexture. This chapter gives an overview of the state-of-the-art of EBSD analysis of facets and surfaces.

Keywords

Fracture Surface Slip Trace Orientation Matrix Fracture Facet EBSD Measurement 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Reference

  1. Blochwitz, C, Brechbuhl, J., and Tirschler, W., 1996, Analysis of activated slip systems in fatigued nickel polycrystals using the EBSD-technique in the scanning electron microscope, Mat. Sci. Eng. A210:42.CrossRefGoogle Scholar
  2. Field, D.P., 1997, Recent advances in the application of orientation imaging, Ultramicroscopy, 67:1.CrossRefGoogle Scholar
  3. Lin, H., and Pope, D.P., 1996, Formation of slip traces during grain growth of thin metal sheets, Mat. Sci. For. 204–206:399.Google Scholar
  4. Liu, W., Bayerlein, M., Mughrabi, H., Day, A., and Quested, P.N., 1992, Crystallographic features of intergranular crack initiation in fatigued copper polycrystals, Acta Met. et Mat. 40:1763.CrossRefGoogle Scholar
  5. Malis, T.F., and Steele, D., 1990, Ultramicrotomy for materials science, Proc. Materials Research Society, R. Anderson, ed., 199, Pittsburgh, USA.Google Scholar
  6. Raabe, D., Keichel, J., Mao, W., Sun, Z., and Gottstein, G., 1997, An investigations of the active slip systems in warm rolled Fe3Al by use of microtexture measurements and slip trace determination, Proc. 11thInternational Conference on Textures of Materials (ICOTOM11), Z. Liang et al., eds., International Academic Publishers, China, 1027.Google Scholar
  7. Randle, V., 1993, Grain Boundary Geometry in Polycrystals, Institute of Physics Publishing, Bristol.Google Scholar
  8. Randle, V., 1995, Crystallographic characterisation of planes in the scanning electron microscope, Mat. Char. 34:29.CrossRefGoogle Scholar
  9. Randle, V., 1997, The role of the grain boundary plane in cubic polycrystals, Acta Mat. 46:1459.CrossRefGoogle Scholar
  10. Randle, V., 1999, Crystallographic analysis of facets using electron back-scatter diffraction, Journal of Microscopy (special EBSD edition), A. Wilkinson, ed., 195:226.CrossRefGoogle Scholar
  11. Randle, V., and Hoile, C, 1998, Crystallographic analysis of facets using electron backscatter diffraction, in: Proc. Int. Conf. on Texture and Anisotropy of Polycrystals, R.A. Schwarzer, ed., Trans Tech. Pub. Ltd, Switzerland, 183.Google Scholar
  12. Randle, V., and Dingley, D.J., 1989, Measurement of boundary plane inclination in a scanning electron microscope, Scripta Met. 23:1565.CrossRefGoogle Scholar
  13. Randle, V., Caul, M.C., and Fiedler, J., 1997, Twinning and interfacial planes in copper, Microscopy and Analysis, 3:224.Google Scholar
  14. Randle, V., Davies, P., and Davies, H., 1999, Texture and multiple twinning, in: Proc. ICOTOM12, J.A. Szpunar, ed., NRC Research Press, Canada, 1196.Google Scholar
  15. Slavik, D.C., Wert, J.A., and Gangloff, R.P., 1993, Determining fracture facet crystallography using electron backscatter patterns and quantitative tilt fractography, J. Mater. Res. 8:2482.CrossRefGoogle Scholar
  16. Themelis, G., Chikwembani, S., and Weertman, J., 1990, Determination of the orientation of Cu-Bi grain boundary facets using a photogrammetric technique, Mat. Char. 24:27.CrossRefGoogle Scholar
  17. Weiland, H., Rouns, T.N., and Liu, J. 1994, The role of particle-stimulated nucleation during recrystallisation of an aluminium-magnesium alloy, Z. Metallk. 85:8.Google Scholar
  18. Wolf, D., 1992, Atomic-level geometry of interfaces, in: Materials Interfaces: Atomic Level Structure and Properties, D. Wolf and S. Yip, eds., Chapman & Hall, London, 1.Google Scholar

Copyright information

© Springer Science+Business Media New York 2000

Authors and Affiliations

  • Valerie Randle
    • 1
  1. 1.Dept. Materials EngineeringUniversity of Wales SwanseaSwanseaUK

Personalised recommendations