Advertisement

Capacitive Interfaces for Monolithic Integrated Sensors

  • Bernhard E. Boser

Abstract

Surface micromachining has become an established technology for inertial sensing. Compatibility with standard IC fabrication processes enables monolithic integration of the sensing element and interface electronics for reduced size and power dissipation, simplified packaging, and increased functionality. The need to resolve sub-Angstrom displacements poses a challenge on the interface. Capacitive pickups are attractive since they do not require special processing and because of their dual function as sensor and electrostatic actuator. The principles and practical considerations for capacitive sensor interfaces are discussed along with circuit examples including a precision sensor with a 3×10-12m/rt-Hz position measurement noise floor.

Keywords

Resonant Frequency Flicker Noise Noise Floor Sense Capacitor Differential Pair 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    J. M. Bustillo, G. K. Fedder, C. T.-C. Nguyen, and R. T. Howe, “Process technology for the modular integration of CMOS and polysilicon microstructures,” Microsystem Technologies, vol. 1, pp. 30–41 1994.CrossRefGoogle Scholar
  2. [2]
    T. A. Core, W. K. Tsang, and S. J. Sherman, “Fabrication technology for an integrated surface-micromachined sensor,” Solid State Technol. , vol. 36, no. 10, pp. 39–40, 42, 44, 46–37, Oct. 1993.Google Scholar
  3. [3]
    J. H. Smith, S. Montague, J. J. Sniegowski, J. R. Murray, and P. J. McWhorter, “Embedded micromechanical devices for the monolithic integration of MEMS with CMOS,” in IEDM Tech. Dig., 1995, pp. 609–612.Google Scholar
  4. [4]
    ADXL50, “Monolithic accelerometer with signal conditioning.” Datasheet, Analog Devices, Inc, One Technology Way, Norwood, MA 02062, 1993.Google Scholar
  5. [5]
    ADXL05, “Monolithic accelerometer with signal conditioning.” Datasheet, Analog Devices, Inc., One Technology Way, Norwood, MA 02062, 1995.Google Scholar
  6. [6]
    MMAS40, “Micromachined accelerometer.” Datasheet, Motorola, Inc, Motorola Literature Distribution, P.O.Box 20912, Phoenix, AZ 85036, 1995.Google Scholar
  7. [7]
    M. A. Lemkin, M. A. Oritiz, N. Wongkomet, B. E. Boser, and J. H. Smith, “A 3-axis surface micromachined ΣΔ accelerometer,” in ISSCC Dig. Tech. Papers, 1997, pp. 202–203.Google Scholar
  8. [8]
    G. K. Fedder, S. Santhanam, M. L. Reed, S. C. Eagle, D. F. Guillou, M. S. C. Lu, and L. R. Carley, “Laminated high-aspect-ratio microstructures in a conventional CMOS process,” in Proceedings. IEEE, The Ninth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, 1996, pp. 13–18.Google Scholar
  9. [9]
    T. J. Brosnihan, A. P. Pisano, and R. T. Howe, “Surface micromachined angular accelerometer with force-feedback.,” in Dig. ASME Int. Conf. and Exp., 1995Google Scholar
  10. [10]
    M. A. Lemkin, “A fully differential lateral ΣΔ accelerometer with drift cancellation circuitry,” in Technical Digest Solid-State Sensor and Actuator Workshop, 1996, pp. 90–93.Google Scholar
  11. [11]
    W. Yun, R. T. Howe, and P. R. Gray, “Surface micromachined, digitally force-balanced accelerometer with integrated CMOS detection circuitry,” in Technical Digest. IEEE Solid-State Sensor and Actuator Workshop, 1992, pp. 126–131.Google Scholar
  12. [12]
    M. Lemkin and B. E. Boser, “A micromachined fully differential lateral accelerometer,” in Proc. IEEE Custom Integrated Circuits Conf, 1996, pp. 315–318.CrossRefGoogle Scholar
  13. [13]
    T. B. Gabrielson, “Mechanical-thermal noise in micromachined acoustic and vibration sensors,” IEEE Trans. Electron Dev., vol. 40, no. 5, pp. 903–909, May 1993.CrossRefGoogle Scholar
  14. [14]
    B. E. Boser and R. T. Howe, “Surface micromachined accelerometers,” IEEE J. Solid-State Circuits, vol. 31, no. 3, pp. 366–375, May 1996.CrossRefGoogle Scholar
  15. [15]
    R. T. Howe, B. E. Boser, and A. P. Pisano, “Polysilicon integrated microsystems: technologies and applications,” Sens. Actuators A, Phys., vol. A56, no. 1–2, pp. 167–177, Aug. 1996.CrossRefGoogle Scholar
  16. [16]
    C. Lu, M. Lemkin, and B. E. Boser, “A monolithic surface micromachined accelerometer with digital output,” IEEE J. Solid-State Circuits, vol. 30, no. 12, pp. 1367–1373, Dec. 1995.CrossRefGoogle Scholar
  17. [17]
    J. C. Candy and G. C. Temes, “Oversampling methods for A/D and D/A conversion,” in Oversampling delta-sigma data converters, no. Issue, J. C. Candy and G. C. Termes, Eds.: IEEE Press, 1992, pp. 1–29.Google Scholar
  18. [18]
    W. Henrion, L. DiSanza, M. Ip, S. Terry, and H. Jerman, “Wide dynamic range direct digital accelerometer,” in Tech. Dig. Solid-State Sensor and Actuator Workshop, 1990.Google Scholar

Copyright information

© Springer Science+Business Media Dordrecht 1997

Authors and Affiliations

  • Bernhard E. Boser
    • 1
  1. 1.Berkeley Sensor & Actuator Center Department of Electrical Engineering and Computer SciencesUniversity of CaliforniaBerkeleyUSA

Personalised recommendations