Advertisement

A System to Aid Design by Planning Manufacturing Operations

  • J. Bennaton
  • K. Case
  • N. Hart
  • S. Acar

Summary

Design for manufacture is a well-accepted concept, but there is little evidence that computer-aided design (CAD) systems are aimed at this specific objective. Instead, they tend to mimic each stage of the existing design to manufacture sequence, albeit with the important addition of effectively linking successive phases. The advent of computer solid modelling systems provides an opportunity for the simulation of manufacturing processes as an aid to design. The major potential advantage is the integration of manufacturing considerations with design, together with the provision of an engineering language for CAD and the capture of information for the subsequent stages of manufacture. This paper describes initial work pn such a system to simulate metal-cutting operations in the context of component design and process planning.

Keywords

Process Planning Stock Material Engineering Drawing Process Planning System Numerical Control Programming 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    Link C H (1976) CAPP-CAM-I automated process planning system. Proc. of 1916 N/C Conf. CAM-I Inc., Arlington, Texas.Google Scholar
  2. [2]
    Schaffer G (1980) GT via automated process planning. American Machinist, May, 119.Google Scholar
  3. [3]
    Spur J, Anger, H M and Kunzendorf K (1978) CAPSY, a dialogue system for computer aided manufacturing process planning. Machine Tool Design and Research Conf. vol. 19, p.281.Google Scholar
  4. [4]
    El-Midany and Davies B J (1981) AUTOCAP: a dialogue system for planning the sequence of operations for turning components. International Journal of Machine Tool Design and Research, 21 (3/4), 175.CrossRefGoogle Scholar
  5. [5]
    Ssemakula M E (1984) Integrated process planning and NC programming for prismatic parts. Proc. 1st Int. Machine Tool Conf Birmingham, UK, 26–28 June 1984, p. 143.Google Scholar
  6. [6]
    Chang T C and Wysk R (1981) An integrated CAD-automated process planning system. AEII Transactions, 13, 233.Google Scholar
  7. [7]
    Chang, T C and Wysk R (1984) Integrating CAD and CAM through automated process planning. International Journal of Production Research 22 (5), 877.CrossRefGoogle Scholar
  8. [8]
    Logan F (1981) Let LOCAM take the paperwork out of planning. Production Engineer, June, 15.Google Scholar
  9. [9]
    Anonymous (1984) CAPES, Computer Aided Planning and Estimating System UNBUCON Productivity Services, Coventry.Google Scholar
  10. [10]
    Anonymous (1984) C-PLAN CAD Centre Ltd, Cambridge.Google Scholar
  11. [11]
    Parkinson A (1983) Expert Systems in Geometric Modelling and its Applications Computer Aided Engineering Group, Cambridge University Engineering Department.Google Scholar
  12. [12]
    Davies B J and Darbyshire L (1984) The use of expert systems in process planning. Annals of the CIRP 33/1.Google Scholar
  13. [13]
    Lee Y T (1984) BOXER, subroutine driven version PAFEC Ltd, Nottingham.Google Scholar

Copyright information

© Springer Science+Business Media New York 1986

Authors and Affiliations

  • J. Bennaton
    • 1
  • K. Case
    • 1
  • N. Hart
    • 1
  • S. Acar
    • 1
  1. 1.Department of Engineering ProductionLoughborough University of TechnologyLoughborough, LeicestershireUK

Personalised recommendations