Advertisement

Glued Laminated Members

  • Judith J. Stalnaker
  • Ernest C. Harris
Part of the VNR Structural Engineering Series book series (VNRSES)

Abstract

Glued laminated timbers were used as early as the late 1800s. During and since World War II, they have been used extensively. Casein adhesives were the most frequently used until the early 1970s, when they were generally replaced by synthetic resins suitable either for exterior or interior use. Glued laminated members (glulams) have seen increasing use in both buildings and bridges. Structures that would not have been feasible using only sawn-timber members have proved practical and successful using glulams.

Keywords

Curve Beam Size Factor Dead Load Live Load Allowable Stress 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    National Design Specification for Wood Construction,National Forest Products Association, Washington, DC, 1986.Google Scholar
  2. 2.
    Structural Glued Laminated Timber,ANSI/AITC A190.1-1983, American Institute of Timber Construction, Vancouver, WA, 1983.Google Scholar
  3. 3.
    Johnson, J. W., “Edge-Gluing Douglas Fir Lumber to Improve Strength Properties,” Forest Products Journal, 28 (11), Nov. 1978, pp. 37–41.Google Scholar
  4. 4.
    Design Standard Specifications for Structural Glued Laminated Timber of Softwood Species,AITC 11784, American Institute of Timber Construction, Vancouver, WA, 1984.Google Scholar
  5. 5.
    Wood Handbook,U.S. Department of Agriculture, Washington, DC, 1974.Google Scholar
  6. 6.
    Eby, R. E., “Proof Loading of Finger Joints for Glu-lam Timber,” Forest Products Journal, 31 (1), Jan. 1981, pp. 37 – 41.Google Scholar
  7. 7.
    American Institute of Timber Construction, Timber Construction Manual,3rd ed., Wiley, 1986.Google Scholar
  8. 8.
    Uniform Building Code,International Conference of Building Officials, Whittier, CA, 1985.Google Scholar
  9. 9.
    Manual of Steel Construction,8th ed., American Institute of Steel Construction, Chicago, 1980.Google Scholar
  10. 10.
    Building Code Requirements for Reinforced Concrete, ACI 318-83, American Concrete Institute, Detroit, MI, 1983.Google Scholar
  11. 11.
    Wood Structures, a Design Guide and Commentary, ASCE Structural Division, American Society of Civil Engineers, New York, 1975.Google Scholar
  12. 12.
    Maki, A., and E. Kuenzi, “Deflection and Stresses of Tapered Wood Beams,” Forest Products Laboratory Research Paper FPL-34, 1965.Google Scholar

Copyright information

© Springer Science+Business Media New York 1989

Authors and Affiliations

  • Judith J. Stalnaker
    • 1
  • Ernest C. Harris
    • 1
  1. 1.University of Colorado at DenverDenverUSA

Personalised recommendations