Optical Clock Distribution in Electronic Systems

  • Stuart K. Tewksbury
  • Lawrence A. Hornak


Techniques for distribution of optical signals, both free space and guided, within electronic systems has been extensively investigated over more than a decade. Particularly at the lower levels of packaging (intra-chip and chip-to-chip), miniaturized optical elements including diffractive optics and micro-refractive optics have received considerable attention. In the case of optical distribution of data, there is the need for a source of optical power and a need for a means of modulating the optical beam to achieve data communications. As the number of optical data interconnections increases, the technical challenges of providing an efficient realization of the optical data interconnections also increases. Among the system signals which might be transmitted optically, clock distribution represents a substantially simplified problem from the perspective of the optical sources required. In particular, a single optical source, modulated to provide the clock signal, replaces the multitude of optical sources/modulators which would be needed for extensive optical data interconnections. Using this single optical clock source, the technical problem reduces largely to splitting of the optical clock beam into a multiplicity of optical clock beams and distribution of the individual clocks to the several portions of the system requiring synchronized clocks. The distribution problem allows exploitation of a wide variety of passive, miniaturized optical elements (with diffractive optics playing a substantial role). This article reviews many of the approaches which have been explored for optical clock distribution, ranging from optical clock distribution within lower levels of the system packaging hierarchy through optical clock distribution among separate boards of a complex system. Although optical clock distribution has not yet seen significant practical application, it is evident that the technical foundation for such clock distribution is well established. As clock rates increase to 1 GHz and higher, the practical advantages of optical clock distribution will also increase, limited primarily by the cost of the optical components used and the manufacturability of an overall electronic system in which optical clock distribution has been selectively inserted.


Integrate Circuit Solder Bump Optical Beam Clock Signal Diffractive Optic 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    Y. Ota, R.C. Miller, S.R. Forrest, D.A. Kaplan, C.W. Seabury, R.B. Huntington, J.G. Johnson, and J.R. Potopowicz, “Twelve-channel individually addressable InGaAs/InP p-i-n photodiode and InGaAsP/InP LED arrays in a compact package,” IEEE J. Lightwave Technol, Vol. 5, No. 4, pp. 1118–1122, 1987.CrossRefGoogle Scholar
  2. 2.
    Y.M. Wong et al., “Technology development of a high-density 32 channel 16 Gb/s optical data link for optical interconnections for the optoelectronic technology consortium (OETC),” IEEE J. Lightwave Technol, Vol. 13, No. 6, pp. 995–1016, 1995.CrossRefGoogle Scholar
  3. 3.
    H. Karstensen, C. Hanke, M. Honsberg, J.-R. Kropp, J. Wieland, M. Blaser, P. Weger, and J. Popp, “Parallel optical interconnection for uncoded data transmission with 1 Gb/sec-per-channel capacity, high dynamic range, and low power consumption,” IEEE J. Lightwave Technol, Vol. 13, No. 6, pp. 1017–1030, 1995.CrossRefGoogle Scholar
  4. 4.
    Special issue: Diffractive Optics: Design, Fabrication, and Applications,Appl. Optics, Vol. 32, No. 14, 1993.Google Scholar
  5. 5.
    Special issue: Micro-Optics, Optical Eng, Vol. 33, No. 11, pp. 3504–3669, 1994.Google Scholar
  6. 6.
    S.K. Tewksbury, “Interconnections within microelectronic systems,” in Microelectronic System Interconnections: Performance and Modeling, S.K. Tewksbury (Ed.), IEEE Press, Piscataway, pp. 1–49, 1994.Google Scholar
  7. 7.
    S.K. Tewksbury (Ed.), Microelectronic System Interconnections: Perfonnance and Modeling, IEEE Press, Piscataway, NJ, 1994.Google Scholar
  8. 8.
    J.W. Goodman, F.I. Leonberger, S.-Y. Kung, and R.A. Athale, “Optical interconnections for VLSI systems,” Proc. IEEE, Vol. 72, pp. 850–866, 1984.CrossRefGoogle Scholar
  9. 9.
    Special issue: Optical Interconnects,Appl. Opt., Vol. 29, pp. 1067–1177, 1990.Google Scholar
  10. 10.
    D.B. Clymer and J.W. Goodman, “Optical clock distribution to silicon chips,” Opt. Eng, Vol. 25, pp. 1103–1108, 1986.Google Scholar
  11. 11.
    L.A. Bergman, W.H. Wu, A.R. Johnston, R. Nixon, S.C. Esener, C.C. Guest, P. Yu, T.J. Brabik, M. Feldman, and S.H. Lee, “Holographic optical interconnects for VLSI,” Opt. Eng, Vol. 25, pp. 1109–1118, 1996.Google Scholar
  12. 12.
    R.K. Kostuk, L. Wang, and Y.-T. Huang, “Optical clock distribution with holographic optical elements,” in Real-Time Signal Processing XI, J.P. Letellier (Ed.), Proc. SPIE, Vol. 977, pp. 2436, 1988.Google Scholar
  13. 13.
    S. Koh, H.W. Carter, and J.T. Boyd, “Synchronous global clock distribution on multichip modules using optical waveguides,” Optical Eng, Vol. 33, No. 5, pp. 1587–1595, 1994.CrossRefGoogle Scholar
  14. 14.
    A. Himeno, H. Terui, and M. Kobayashi, “Loss measurement and analysis of high-silica reflection bending waveguides,” IEEE J. Lightwave Technol, Vol. 6, No. 1, pp. 41–46, 1988.CrossRefGoogle Scholar
  15. 15.
    F. Lin, E.M. Strzelecki, and T. Jannson, “Optical multiplanar VLSI interconnects based on multiplexed waveguide holograms,” Appl. Optics, Vol. 29, No. 8, pp. 1126–1133, 1990.CrossRefGoogle Scholar
  16. 16.
    F. Lin, C. Nugyen, J. Zhu, and B.M. Hendrickson, “Dispersion effects in a single-mode holographic waveguide interconnect system,” Appl. Optics, Vol. 31, No. 32, pp. 6831–6835, 1992.CrossRefGoogle Scholar
  17. 17.
    S.J. Walker, J. Jahns, L. Li, W.M. Mansfield, P. Mulgrew, D.M. Tennant, C.W. Roberts, L.C. West, and N.K. Ailawadi, “Design and fabrication of high-efficiency beam splitters and beam deflectors for integrated planar micro-optic systems,” Appl. Optics, Vol. 32, No. 14, pp. 2494–2501, 1993.Google Scholar
  18. 18.
    T. Kubota and M. Takeda, “Array illuminator using grating couplers,” Optics Letts, Vol. 14, No. 12, pp. 651–652, 1989.CrossRefGoogle Scholar
  19. 19.
    J.M. Miller, M.R. Tagizadeh, J. Turunen, and N. Ross, “Multilevel-grating array generators: Fabrication error analysis and experiments,” Appl. Optics, Vol. 32, No. 14, pp. 2519–2525, 1993.Google Scholar
  20. 20.
    E. Sidick, A. Knoesen, and J.N. Mait, “Design and rigorous analysis of high-efficiency array generators,” Appl. Optics, Vol. 32, No. 14, pp. 2599–2605, 1993.CrossRefGoogle Scholar
  21. 21.
    S.K. Patra, J. Ma, V.H. Ozguz, and S.H. Lee, “Alignment issues in packaging for free-space optical interconnects,” Optical Eng, Vol. 33, No. 5, pp. 1561–1570, 1994.CrossRefGoogle Scholar
  22. 22.
    J. Schwider, W. Stork, N. Streibl, and R. Völkel, “Possibilities and limitations of space-variant holographic optical elements for switching networks and general interconnects,” Appl. Optics, Vol. 31, No. 35, pp. 7403–7410, 1992.CrossRefGoogle Scholar
  23. 23.
    K.-H. Brenner and F. Sauer, “Diffractive-reflective optical interconnects,” Appl. Optics, Vol. 27, No. 20, pp. 4251–4254, 1988.CrossRefGoogle Scholar
  24. 24.
    E. Bradley, P.K.L. Yu, and A.R. Johnston, “System issues relating to laser diode requirements for VLSI holographic optical interconnections,” Optical Eng, Vol. 28, No. 3, pp. 201–211, 1989.Google Scholar
  25. 25.
    J. Jahns, Y.H. Lee, C.A. Burrus, Jr., and J. Jewell, “Optical interconnects using top-surface-emitting microlasers and planar optics,” Appl. Optics, Vol. 31, No. 5, pp. 592–597, 1992.Google Scholar
  26. 26.
    G.P. Behrmann and J.P. Bowen, “Influence of temperature on diffractive lens performance,” Appl. Optics, Vol. 32, No. 14, pp. 2483–2489, 1993.CrossRefGoogle Scholar
  27. 27.
    J. Schwider, “Achromatic design of holographic optical interconnects,” Optical Eng, Vol. 35, No. 3, pp. 826–831, 1996.CrossRefGoogle Scholar
  28. 28.
    T.M. Shen, “Timing jitter in semiconductor lasers under pseudorandom word modulation,” IEEE J. Lightwave Technol, Vol. 7, pp. 1394–1399, 1989.CrossRefGoogle Scholar
  29. 29.
    A. Weber, W. Ronghan, E. Bottcher, M. Schell, and D. Bimberg, “Measurement and simulation of the turn-on delay time jitter in gain-switched semiconductor lasers,” IEEE J. Quantum Electronics, Vol. 28, pp. 441–446, 1992.CrossRefGoogle Scholar
  30. 30.
    V.N. Morozov and W. Thomas Cathey, “Practical speed limits of free-space global holographic interconnects: Time skew, jitter and turn-on delay,” Appl. Optics, Vol. 33, No. 8, pp. 1380–1390, 1994.CrossRefGoogle Scholar
  31. 31.
    R. Cinato and K.C. Young, Jr., “Optical interconnections within multichip modules,” Optical Eng, Vol. 32, No. 4, pp. 852–860, 1993.CrossRefGoogle Scholar
  32. 32.
    S.K. Tewksbury, Wafer Level System Integration: Implementation Issues, Kluwer Academic Publishers, Boston, 1989.CrossRefGoogle Scholar
  33. 33.
    S.K. Tewksbury and L.A. Hornak, “Multichip modules: A platform for optical interconnections within microelectronic systems,” Int. J. Optoelectronics, Devices, and Technologies, MITA Press, Japan, Vol. 9, No. 1, pp. 55–80, 1994.Google Scholar
  34. 34.
    L.A. Hornak and S.K. Tewksbury, “On the feasibility of through-wafer optical interconnects for hybrid wafer-scale integrated architectures,” IEEE Trans. Elect. Dev, Vol. 34, No. 7, pp. 15571563, 1987.Google Scholar
  35. 35.
    D.S. Wills, W.S. Lacy, C. Camperi-Ginestet, B. Buchanan, H.H. Cat, S. Wildinson, M. Lee, N.M. Jokerst, and M.A. Brooke, “A three-dimensional high-throughput architecture using through-wafer optical interconnect,” IEEE J. Lightwave Technol, Vol. 13, No. 6, pp. 1085–1092, 1995.CrossRefGoogle Scholar
  36. 36.
    M.J. Wale et al., “A new self-aligned technique for the assembly of integrated optical devices with optical fiber and electronic interfaces,” Proc. ICIC ‘89, paper ThA 19–7, p. 368, 1989.Google Scholar
  37. 37.
    M.J. Goodwin, A.J. Mosely, M.G. Kearly, R.C. Morris, D.J. Groves-Kirkby, J. Thompson, R.C. Goodfellow, and I. Bennion, “Optoelectronic component arrays for optical interconnection of circuits and systems,” IEEE J. Lightwave Technol, Vol. 9, No. 12, pp. 1639–1645, 1991.CrossRefGoogle Scholar
  38. 38.
    R. Selvaraj, H.T. Lin, and J.F. McDonald, “Integrated optical waveguides in polyimide for wafer scale integration,” IEEE J. Lightwave Technol, Vol. 6, pp. 1034–1037, 1988.CrossRefGoogle Scholar
  39. 39.
    J.C. Lyke, R. Wojnarowski, G.A. Forman, E. Bernard, R. Saia, and B. Gorowitz, “Three dimensional patterned overlay high density interconnect (HDI) technology,” Journal of Microelectronic Systems Integration, Vol. 1, No. 2, pp. 99–141, 1993.Google Scholar
  40. 40.
    R.S. Beech and A.K. Ghosh, “Optimization of alignability in integrated planar-optical interconnect packages,” Appl. Optics, Vol. 32, No. 29, pp. 5741–5749, 1993.CrossRefGoogle Scholar
  41. 41.
    J. Jahns and R.A. Brumback, “Integrated-optical split-and-shift module based on planar optics,” Opt. Commun, Vol. 76, pp. 318323, 1990.Google Scholar
  42. 42.
    F. Sauer, “Fabrication of diffractive-reflective optical interconnects for infrared operation based on total internal reflection,” Appl. Optics, Vol. 28, pp. 386–388, 1989.CrossRefGoogle Scholar
  43. 43.
    J. Jahns and A. Huang, “Planar integration of free-space optical components,” Appl. Optics, Vol. 28, pp. 1602–1605, 1989.CrossRefGoogle Scholar
  44. 44.
    H.J. Haumann, H. Kobolla, F. Sauer, J. Schmidt, J. Schwider, W. Stork, N. Streibl, and R. Völkel, “Optoelectronic interconnections based on a light-guiding plate with holographic coupling elements,” Opt. Eng, Vol. 30, pp. 1620–1623, 1991.CrossRefGoogle Scholar
  45. 45.
    L.A. Hornak, S.K. Tewksbury, J.C. Barr, W.D. Cox, and K.S. Brown, “Optical interconnections and cryoelectronics: Complimentary enabling technologies for emerging mainstream systems,” SPIE Photonics West Symposium, Optical Interconnections III Conference, San Jose, CA, Feb. 1995.Google Scholar
  46. 46.
    J.W. Parker, “Optical interconnection for advanced processor systems: A review of the ESPRIT II OLIVES program,” IEEE J. Lightwave Technol, Vol. 9, pp. 1764–1773, 1991.CrossRefGoogle Scholar
  47. 47.
    Y. Yamanaka, K. Yoshihara, I. Ogura, T. Numai, K. Kasahara, and Y. Ono, “Free-space optical bus using cascaded verticalto-surface transmission electrophotonic devices,” Appl. Optics, Vol. 31, No. 23, pp. 4676–4681, 1992.CrossRefGoogle Scholar
  48. 48.
    A. Guha, J. Briston, C. Sullivan, and A. Husain, “Optical interconnects for massively parallel architectures,” Appl. Optics, Vol. 29, pp. 1077–1093, 1990.CrossRefGoogle Scholar
  49. 49.
    K. Kasahara, Y. Tahiro, N. Hamao, M. Sugimoto, and T. Yanese, “Double heterostructure optoelectronic switch as a dynamic memory with low-power consumption,” Appl. Phy.s. Lett, Vol. 52, pp. 679–681, 1988.Google Scholar
  50. 50.
    K. Rastani and W.M. Hubbard, “Alignment and fabrication tolerances of planar gratings for board-to-board optical interconnects,” Appl. Optics, Vol. 31, pp. 4863–4870, 1992.CrossRefGoogle Scholar
  51. 51.
    High-speed optical interconnects for digital systems,“ Lincoln Labs. Journal,Vol. 4, pp. 31–43, 1991.Google Scholar
  52. 52.
    D.Z. Tsang, “Free-space board-to-board optical interconnections” in Optical Enhancements to Computing Technology, J.A. Heff (Ed.), SPIE Vol. 1563, pp. 66–71, 1991.Google Scholar
  53. 53.
    D.Z. Tsang and T.J. Goblick, “Free-space optical interconnection technology in parallel processing systems,” Optical Eng, Vol. 33, No. 5, pp. 1524–1531, 1994.CrossRefGoogle Scholar
  54. 54.
    C.T. Sullivan, “Optical waveguide circuits for printed wire-board interconnections,” Proc. SPIE, Optoelectronic Materials, Devices and Packaging, Vol. 994, p. 92, 1988.Google Scholar
  55. 55.
    R.C. Kim, E. Chen, and F. Lin, “An optical holographic backplane interconnect system,” IEEE J. Lightwave Technol, Vol. 9, pp. 1650–1656, 1991.CrossRefGoogle Scholar
  56. 56.
    S. Natarajan, C. Zhao, and R.T. Chen, “Bi-directional optical backplane bus for general purpose multiprocessor board-toboard optoelectronic interconnects,” IEEE J. Lightwave Technol, Vol. 13, No. 6, pp. 1031–1040, 1995.CrossRefGoogle Scholar
  57. 57.
    R.K. Kostuk, J.-H. Yeh, and M. Fink, “Distributed optical data bus for board-level interconnections,” Appl. Optics, Vol. 32, No. 26, pp. 5010–5021, 1993.CrossRefGoogle Scholar
  58. 58.
    R.K. Kostuk, “Simulation of board-level free-space optical interconnects for electronic processing,” Appl. Optics, Vol. 31, No. 14, pp. 2438–2445, 1992.CrossRefGoogle Scholar
  59. 59.
    B. Dheodt, P. De Dobbalaer, J. Blondelle, P. Van Daile, P. Demester, and R. Baets, “Monolithic integration of diffractive lenses with LED arrays for board-to-board free space optical interconnect,” IEEE J. Lightwave Technol, Vol. 13, No. 6, pp. 1065–1073, 1995.CrossRefGoogle Scholar
  60. 60.
    R.S. Beech and A.K. Ghosh, “Optimization of alignability in integrated planar-optical interconnect packages,” Appl. Optics, Vol. 32, No. 29, pp. 5741–5749, 1993.CrossRefGoogle Scholar

Copyright information

© Kluwer Academic Publishers 1997

Authors and Affiliations

  • Stuart K. Tewksbury
    • 1
  • Lawrence A. Hornak
    • 1
  1. 1.Department of Electrical and Computer EngineeringWest Virginia UniversityMorgantownUSA

Personalised recommendations