Phenolic Resins

  • Janis Robins
Part of the Topics in Applied Chemistry book series (TAPP)

Abstract

Phenolic resins are the reaction products of phenol and formaldehyde. A large variety of resins are possible, depending on the choice of phenol, the phenol/formaldehyde molar ratio, the type and amount of catalyst, and the time and temperature of the reaction.

Keywords

Hexa Vinyl Paraformaldehyde Quinone Butanol 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    A. Bayer, Ber. 5, 280–1095 (1872).Google Scholar
  2. 2.
    A. Bayer, Ger Patent 85, 588 (1894);Google Scholar
  3. A. Bayer, Ger. Patent 87, 335 (1895).Google Scholar
  4. 3.
    L. Lederer, J. Prakt. Chem. 50, 223 (1894).Google Scholar
  5. 4.
    O. Manasse, Ber. Otsch. Chem. Ges. 27, 2409 (1894).Google Scholar
  6. 5.
    A. Smith, Ger. Patent 112, 685 (1899).Google Scholar
  7. 6.
    L. Blumer, Ger. Patent 172, 877 (1902).Google Scholar
  8. 7.
    L. H. Baekeland, Ind. Eng. Chem. 1, 149 (1909);Google Scholar
  9. L. H. Baekeland, U.S. Patent 942, 699 (1907).Google Scholar
  10. 8.
    J. K. Traubenberg, Angew. Chem. 36, 515 (1923).Google Scholar
  11. 9.
    L. H. Baekeland and H. L. Bender, Ind. Eng. Chem. 17, 225 (1925).Google Scholar
  12. 10.
    J. Scheiber, Kunststoffe 19, 106 (1929).Google Scholar
  13. 11.
    F. Pollan and F. Riesenfeld, Z. Angew. Chem. 43, 1129 (1930).Google Scholar
  14. 12.
    F. S. Granger, Ind. Eng. Chem. 24, 442 (1932).Google Scholar
  15. 13.
    F. S. Granger, Ind. Eng. Chem. 29, 860, 1195, 1305 (1937).Google Scholar
  16. 14.
    N. J. L. Megson, Phenolic Resin Chemistry, Academic Press, New York (1958).Google Scholar
  17. 15.
    T. S. Carswell, Phenolplasts, Interscience Publishers, Inc., New York (1947).Google Scholar
  18. 16.
    A. A. K. Whitehouse, E. G. K. Pritchett, and G. Barnett, Phenolic Resins, Iliffe Books Ltd., London (1967).Google Scholar
  19. 17.
    K. H. Hultzsch, Chemie der Phenollbarze, Springer-Verlag, Berlin (1950).Google Scholar
  20. 18.
    A. Zinke and St. Pucher, Monatsh. Chem. 79 (1), 26 (1948).Google Scholar
  21. 19.
    S. Van der Meer, Comm. of Plastics Dept. of Rubber Found, Delft 47, 48, (1944).Google Scholar
  22. 20.
    H. S. Lilley, J. Soc. Chem. Ind. London 67, 196 (1948).Google Scholar
  23. 21.
    A. Zinke and E. Ziegler, Mien Chemikemtg 47, 151 (1944).Google Scholar
  24. 22.
    P. D. Caesar and A. N. Sachanen, Ind. Eng. Chem. 40, 922 (1948).Google Scholar
  25. 23.
    A. A. Drummond, J. Soc. Chem. Ind. London 41, 522 (1922).Google Scholar
  26. 24.
    S. R. Finn, G. J. Lewis, and N. J. L. Megan, J. Soc. Chem. Ind. London 69, 129 (1950).Google Scholar
  27. 25.
    H. L. Bender, A. G. Farnham, J. W. Guyer, F. N. Apel, and T. B. Gibb, Jr., Ind. Eng. Chem. 44, 1619 (1952).Google Scholar
  28. 26.
    H. L. Bender, A. G. Farnham, and J. W. Guyer (Bakelite Corp.), U.S. Patent 2,464, 207 (1949).Google Scholar
  29. 27.
    S. R. Finn and G. J. Lewis, J. Appl. Chem. 1, 524–560 (1951).Google Scholar
  30. 28.
    S. R. Finn and J. W. G. Musty, J. Appt. Chem. 1, 182 (1951).Google Scholar
  31. 29.
    A. T. Carpenter and R. F. Hunter, J. Appl. Chem. 1, 217 (1951).Google Scholar
  32. 30.
    J. H. Freeman, Anal. Chem. 24, 955 (1952).Google Scholar
  33. 31.
    J. Reese, Angew. Chem. 66, 170 (1954).Google Scholar
  34. 32.
    J. Reese, Kunststoffe 45 (4), 137 (1955).Google Scholar
  35. 33.
    S. R. Finn and J. W. James, J. Appl. Chem. 6, 466 (1956).Google Scholar
  36. 34.
    H. W. Thompson, J. Chem. Soc., 293 (1947).Google Scholar
  37. 35.
    R. E. Richards and H. W. Thompson, J. Chem. Soc., 1260 (1947).Google Scholar
  38. 36.
    S. I. Ishida, Y. Tsutsumi, and K. Kaneko, J. Polym. Sci. 19, 1609 (1981).Google Scholar
  39. 37.
    H. P. Higginbottom, H. M. Culbertson, and J. C. Woodbrey, Anal. Chem. 37, 1021 (1965).Google Scholar
  40. 38.
    J. C. Woodbrey, H. P. Higginbottom, and H. M. Culbertson, J. Polym. Sci., Part A-3, 1079 (1965).Google Scholar
  41. 39.
    T. Tanno, Y. Mukouyama, and T. Saito, Polym. Lett. 10, 51 (1972).Google Scholar
  42. 40.
    P. R. Steiner, J. AppL Polym. Set 19, 215 (1975).Google Scholar
  43. 41.
    M. G. Kim, G. T. Tiedeman, and L. W. Amos, in: Phenolic Resins: Chemistry and Application, p. 263, Weyerhaeuser Co., Tacoma, WA, (1981).Google Scholar
  44. 42.
    H. Lippmaa, Kern-Kemi 8 (3), 96 (1981).Google Scholar
  45. 43.
    E. Dradi, G. Casiraghi, and G. Casnati, Chem. Ind. 16, 627 (1978).Google Scholar
  46. 44.
    R. H. White and T. F. Rust, J. Appl. Polym. Sci. 9, 777 (1965).Google Scholar
  47. 45.
    S. N. Tong, K. Y. Park, and J. J. Harwood, Polym. Prepr., Am. Chem. Soc., Div. Polym. Chem. 24, 196 (1983).Google Scholar
  48. 46.
    L. E. Walker, E. A. Dietz, Jr., R. A. Wolfe, B. F. Dannels, and S. A. Sojka, Polym. Prep., Am. Chem. Soc., Div. Polym. Chem. 24, 177 (1983).Google Scholar
  49. 47.
    J. R. Ebdon, in: Development in Polymer Characterisation-2, ( J. V. Dawkins, ed.), Appl. Sci. Publ. Ltd., London (1980).Google Scholar
  50. 48.
    H. Pasch, P. Goetzky, E. Grundemann, and H. Raubach, Acta Polymerica 32, 14 (1981).Google Scholar
  51. 49.
    H. Schindbauer, G. Henkel, J. Weiss, W. Eichberger, and P. O. Hromatka, Angew. MakromoL Chem. 49 (725), 115 (1976).Google Scholar
  52. 50.
    A. J. J. de Breet, W. Dankelman, W. G. B. Hysmans, and J. de Wit, Makromol. Chem. 62, 7 (1977).Google Scholar
  53. 51.
    R. Burns and E. W. Orrell, J. Mater. Sci. 2, 72 (1967).Google Scholar
  54. 52.
    J. W. Adlersley, V. M. R. Bertram, G. R. Harper, and B. P. Stark, Br. Polym. J. 1, 101 (1969).Google Scholar
  55. 53.
    M. Duval, B. Bloch, and S. Kohn, J. Appl. Polym. Sci. 16, 1585 (1972).Google Scholar
  56. 54.
    D. Braun and J. Arndt, Angew. Makromol. Chem. 73, 133 (1978).Google Scholar
  57. 55.
    E. J. Quinn, H. W. Osterhoudt, J. S. Heckles, and D. C. Ziegler, Anal. Chem. 40, 547 (1968).Google Scholar
  58. 56.
    J. H. Freeman, J. Am. Chem. Soc. 74, 6257 (1952).Google Scholar
  59. 57.
    A. Sebenik, J. Chromatogr. 160, 205 (1978).Google Scholar
  60. 58.
    H. Much and H. Pasch, Acta Polymerica 33, 366 (1982).Google Scholar
  61. 59.
    E. G. K. Pritchett, Chem. Ind., 295 (1949).Google Scholar
  62. 60.
    A. Knop and W. Scheib, Chemistry Applications of Phenolic Resins, Springer-Verlag, New York (1979).Google Scholar
  63. 61.
    A. M. Partanskey, Am. Chem. Soc., Div. Org. Coat. Plast. Chem. 27 (1), 115 (1967).Google Scholar
  64. 62.
    R. W. Martin, The Chemistry of Phenolic Resins, John Wiley & Sons, Inc., New York (1956).Google Scholar
  65. 63.
    N. Komblum, R. A. Smiley, R. K. Blackwood, and D. C. Illiand, J. AppL Chem. Soc. 77, 7269 (1955).Google Scholar
  66. 64.
    P. W. Kopf and E. R. Wagner, J. Polym. Sci., Polym. Chem. Ed. 11, 939 (1973).Google Scholar
  67. 65.
    H. C. Malhotra and (Mrs.) Avinash, J. Appl. Polym. Sci. 20, 2461 (1976).Google Scholar
  68. 66.
    G. L. Brode, in: Encyclopedia of Chemical Technology, 3rd Ed., Vol. 17, p. 386, John Wiley & Sons, New York (1982).Google Scholar
  69. 67.
    M. F. Drumm and J. R. Le Blanc, Kinet. Mech. Polym. 3, 157 (1972).Google Scholar
  70. 68.
    R. H. Peterson, W. J. Burke, and W. C. Nickles, Am. Chem. Soc., Div. Org. Coat. Plast. Chem., Proc. 27 (1), 164 (1967).Google Scholar
  71. 69.
    W. J. Burke, S. H. Ruetman, and H. P. Higginbottom, J. Polym. Sci. 38, 513 (1959).Google Scholar
  72. 70.
    W. J. Burke, G. A. Short, and H. P. Higginbottom, J. Polym. Sci. 43, 49 (1960).Google Scholar
  73. 71.
    H. Kammerer and W. Niemann, Makromol. Chem. 169, 1 (1973).Google Scholar
  74. 72.
    P. M. Frontini, T. R. Cuadrado, and R. J. J. Williams, Polymer 23, 267 (1982).Google Scholar
  75. 73.
    A. Kumar, S. K. Gupta, and U. K. Phukan, Polym. Eng. Sci. 21, 1218 (1981).Google Scholar
  76. 74.
    J. Borrajo, M. I. Aranguren, and R. J. J. Williams, Polymer 23, 263 (1982).Google Scholar
  77. 75.
    A. Kumar, U. K. Phukan, A. K. Kulshreshtha, and S. K. Gupta, Polymer 23, 215 (1982).Google Scholar
  78. 76.
    J. H. Freeman and C. W. Lewis, J. Am. Chem. Soc. 76, 2080 (1954).Google Scholar
  79. 77.
    A. Kumar, A. K. Kulshreshtha, and S. K. Gupta, Polymer 21, 317 (1980).Google Scholar
  80. 78.
    H. L. Bender and A. G. Farnham (Bakelite Corp.), U.S. Patent 2,475, 587 (1949).Google Scholar
  81. 79.
    D. A. Fraser, R. W. Hall, and A. L. J. Raum (B. Miller Co. Ltd.), Brit. Patent 773, 547 (1957).Google Scholar
  82. 80.
    D. A. Fraser, R. W. Hall, and A. L. J. Raum (Distillers Co. Ltd.), Brit. Patent 757, 392 (1954).Google Scholar
  83. 81.
    J. E. S. Whitney and P. F. Cartlidge (Catalin Ltd.), Ger. Patent 1,086, 432 (1961).Google Scholar
  84. 82.
    C. P. West, H. H. Leiner, and R. Saltzman (America Potash & Chem.), U.S. Patent 3,006, 893 (1961).Google Scholar
  85. 83.
    U. Boschert and R. B. Dean (The Borden Company), U.S. Patent 3,083, 183 (1963).Google Scholar
  86. 84.
    R. M. Huck (Monsanto Chem. Co.), Ger. Patent 1, 149, 167 (1963).Google Scholar
  87. 85.
    R. M. Huck (Monsanto Chem. Co.), U.S. Patent 3, 332, 911 (1967).Google Scholar
  88. 86.
    H. M. Culbertson and A. D. Buchanan (Monsanto Chem. Australia Ltd.), U.S. Patent 3, 476, 707 (1969).Google Scholar
  89. 87.
    H. M. Culbertson (Monsanto Chem. Co.), U.S. Patent 4, 097, 463 (1978).Google Scholar
  90. 88.
    H. M. Culbertson (Monsanto Chem. Co.), U.S. Patent 4, 113, 700 (1978).Google Scholar
  91. 89.
    J. Robins (Ashland Oil Ref. Co.), U.S. Patent 3,485, 797 (1969).Google Scholar
  92. 90.
    N. L. Bender, Mod. Plast. 30, 136 (1953);Google Scholar
  93. N. L. Bender, Mod. Plast. 31, 115 (1954).Google Scholar
  94. 91.
    A. F. Shepard and T. J. McNaughtan (Hooker Chem. Co.), U.S. Patent 3, 425, 989 (1969).Google Scholar
  95. 92.
    D. A. Fraser, R. W. Hall, and A. L. J. Raum, J. Appl. Chem. 7, 676 (1957).Google Scholar
  96. 93.
    A. Pizzi, J. Polym. Sci., Polym. Lett. Ed. 17, 489 (1979).Google Scholar
  97. 94.
    A. Pizzi, J. Appl. Polym. Sci. 24, 1247 (1979).Google Scholar
  98. 95.
    A. Pizzi, J. Appl. Polym. Sci. 24, 1257 (1979).Google Scholar
  99. 96.
    A. Pizzi and P. Van Der Spuy, J. Polym. Sci., Polym. Chem. Ed. 18, 3447 (1980).Google Scholar
  100. 97.
    J. Robins, J. Appl. Polym. Sci. 9, 831 (1965).Google Scholar
  101. 98.
    G. Casiraghi, G. Casnati, M. Cornia, G. Sartori, and F. Bigi, Makromol. Chem. 182, 2973 (1981).Google Scholar
  102. 99.
    A. Pizzi, Wood Adhesives, Marcel Dekker, New York (1983).Google Scholar
  103. 100.
    G. Casiraghi, M. Cornia, G. Sartori, G. Casnati, and V. Bocchi, Makromol. Chem. 183, 2611 (1982).Google Scholar
  104. 101.
    E. Dradi, G. Casiraghi, G. Sartori, and G. Casnati, Macromolecules 11, 1295 (1978).Google Scholar
  105. 102.
    H. Kammerer and G. Happel, Chem. Rapid Commun. 1, 443 (1980).Google Scholar
  106. 103.
    R. H. Peterson, C. R. Guilbert, and W. J. Burke, Am. Chem. Soc., Div. Org. Coat. Plast. Chem., Proc. 27 (1), 152 (1967).Google Scholar
  107. 104.
    K. Roczniak, T. Biernacka, and M. Skarzynski, J. Appl. Polym. Sci. 28, 531 (1983).Google Scholar
  108. 105.
    G. R. Sprengling, J. Am. Chem. Soc. 76, 1190 (1954).Google Scholar
  109. 106.
    K. Hultzsch and W. Hesse, Kunststoffe 53, 166 (1963).Google Scholar
  110. 107.
    N. D. Gupta and S. K. Chatterjee, J. Polym. Sci., Polym. Chem. Ed. 12, 211 (1974).Google Scholar
  111. 108.
    V. Bohmer, C. Antes, and H. Kammerer, Makromol. Chem. 177, 2201 (1976).Google Scholar
  112. 109.
    N. D. Coggeshall, J. Am. Chem. Soc. 72, 2836 (1950).Google Scholar
  113. 110.
    G. R. Sprengling and C. W. Lewis, J. Am. Chem. Soc. 75, 5709 (1953).Google Scholar
  114. 111.
    V. Z. Deal and G. E. A. Wyld, Anal. Chem. 27, 47 (1955).Google Scholar
  115. 112.
    D. B. Bruss and G. A. Harlow, Anal. Chem. 30, 1836 (1958).Google Scholar
  116. 113.
    R. P. Mitra and S. K. Chatterjee, Indian J. Chem. 2 (3), 85 (1964).Google Scholar
  117. 114.
    T. Cairns and G. Eglinton, J. Chem. Soc., 5906 (1965).Google Scholar
  118. 115.
    S. K. Chatterjee, Can. J. Chem. 47, 2323 (1969).Google Scholar
  119. 116.
    S. K. Chatterjee, Indian J. Chem. 7 (6), 605 (1969).Google Scholar
  120. 117.
    M. Imoto, I. Ijichi, C. Tanaka, and M. Kinoshita, Makromol. Chem. 113, 117 (1968).Google Scholar
  121. 118.
    V. Boehmer, C. Antes, D. Stotz, and G. Stein, in: Phenolic Resins: Chemistry and Application, p. 157, Weyerhaeuser Co., Tacoma, WA, (1981).Google Scholar
  122. 119.
    J. Robins, unpublished results.Google Scholar
  123. 120.
    R. C. Vasishth and P. Chandramouli (Cor Tech Research Ltd.), U.S. Patent 4,036, 816 (1977).Google Scholar
  124. 121.
    R. C. Vasishth and P. Chandramouli (Cor Tech Research Ltd.), U.S. Patent 4,045, 411 (1977).Google Scholar
  125. 122.
    R. C. Vasishth (Cor Tech Research Ltd.), U.S. Patent 4,140, 845 (1979).Google Scholar
  126. 123.
    R. C. Vasishth (Cor Tech Research Ltd.), U.S. Patent 4,161, 576 (1979).Google Scholar
  127. 124.
    R. C. Vasishth and P. Chandramouli (Cor Tech Research Ltd.), U.S. Patent 4,122, 144 (1978).Google Scholar
  128. 125.
    G. J. Anderson and H. M. Culbertson (Monsanto Co.), U.S. Patent 4,022, 942 (1977).Google Scholar
  129. 126.
    J. P. Wuskell (The Quaker Oats Co.), U.S. Patent 4,255, 554 (1981).Google Scholar
  130. 127.
    H. Kammerer, W. Kern, and G. Heuser, J. Polym. Sci. 28, 331 (1958).Google Scholar
  131. 128.
    T. Tanno, T. Shibuyer, and Y. Mukouyama, in: Phenolic Resins: Chemistry and Application, p. 231, Weyerhaeuser Co., Tacoma, WA, (1981).Google Scholar
  132. 129.
    H. Kammerer, K. F. Muck, E. Golzer, and H. Luder, Makromol. Chem. 138, 119 (1970).Google Scholar
  133. 130.
    A. Rieche, H. E. Seyfarth, and F. Brand, Liebigs Ann. Chem. 725, 93 (1969).Google Scholar
  134. 131.
    A. Zinke and E. Ziegler, Chem. Ber. 77 (3/4), 264 (1944).Google Scholar
  135. 132.
    H. Kammerer, G. Happel, and F. Caeser, Makromol. Chem. 162, 179 (1972).Google Scholar
  136. 133.
    C. D. Gutsche, B. Dhawan, K. Hyun No, and R. Muthukrishnan, J. Am. Chem. Soc. 103, 3782 (1981).Google Scholar
  137. 134.
    G. D. Gutsche, R. Muthukrishnan, and K. Hyun No, Tetrahedron Lett. 24, 2213 (1979).Google Scholar
  138. 135.
    H. Kammerer and G. Happel, Phenolic Resins: Chemistry and Applications, p. 143, Weyerhaeuser Co., Tacoma, WA (1981).Google Scholar
  139. 136.
    H. Kammerer and G. Happel, Makromol. Chem. 179, 1199 (1978).Google Scholar
  140. 137.
    H. Kammerer, G. Happel, V. Bohmer, and D. Rathay, Monatsch. Chem. 109, 767 (1978).Google Scholar
  141. 138.
    G. Happel, B. Mathiasch, and H. Kammerer, Makromol. Chem. 176, 3317 (1975).Google Scholar
  142. 139.
    T. B. Patric and P. A. Egan, J. Org. Chem. 42, 382 (1977).Google Scholar
  143. 140.
    C. D. Gutsche and R. Muthukrishnan, J. Org. Chem. 43, 4905 (1970).Google Scholar
  144. 141.
    G. D. Andreetti, R. Ungaro, and A. Pochini, J.C.S., Chem. Commun., 1005 (1979).Google Scholar
  145. 142.
    H. G. Peer, Recl. Tray. Chim. 78, 851 (1959).Google Scholar
  146. 143.
    R. Dijkstra, J. Defong, and M. F. Lammers, Recl. Tray. Chim. 81, 295 (1962).Google Scholar
  147. 144.
    H. C. Malhotra and V. K. Gupta, J. Appl. Polym. Sci. 23, 343 (1978).Google Scholar
  148. 145.
    H. C. Malhotra and (Mrs.) Avinash, Indian J. Chem. 13, 1159 (1975).Google Scholar
  149. 146.
    H. C. Malhotra and V. Kumar, J. Appl. Polym. Sci. 23, 3575 (1979).Google Scholar
  150. 147.
    J. S. Fitzgerald and R. J. L. Martin, Austr. J. Chem. 8, 194 (1955).Google Scholar
  151. 148.
    A. A. Zavitsas, J. Polym. Sci., Part A-1, 6, 2533 (1968).Google Scholar
  152. 149.
    A. A. Zavitsas, R. D. Beaulieu, and J. R. Leblanc, J. Polym. Sci., Part A-1, 6, 2544 (1968).Google Scholar
  153. 150.
    J. W. Aldersley and P. Hope, Angew. Makromol. Chem. 24, 137 (1972).Google Scholar
  154. 151.
    K. C. Eapen and L. M. Yeddanapalli, Makromol. Chem. 119, 4 (1968).Google Scholar
  155. 152.
    K. Moedritzer and J. R. Van Wazer, J. Phys. Chem. 70, 2025 (1966).Google Scholar
  156. 153.
    W. Dankelman and J. M. H. Daemen, Anal. Chem. 48, 401 (1976).Google Scholar
  157. 154.
    Shell Chemical Co. Bulletin SC-54–3Y.Google Scholar
  158. 155.
    R. Dijkstra and J. Defong, J. Recl. Tray. Chim. 76, 92 (1957).Google Scholar
  159. 156.
    H. G. Peer, Recl. Tray. Chim. 78, 851 (1959).Google Scholar
  160. 157.
    H. G. Peer, Recl. Tray. Chim. 79, 825 (1960).Google Scholar
  161. 158.
    J. M. Hine and J. F. Miller (The Bordon Co.), U.S. Patent 2,988, 536 (1961).Google Scholar
  162. 159.
    J. H. Freeman, Am. Chem. Soc., Div. Org. Coat. Plast. Chem., Proc. 27 (1), 84 (1967).Google Scholar
  163. 160.
    M. G. Kim, L. W. Amos, and E. E. Barnes, Polym. Prepr., Am. Chem. Soc., Div. Polym. Chem. 24 (2), 173 (1983).Google Scholar
  164. 161.
    H. P. Higginbottom (Monsanto Co.), U.S. Patent 4,060, 504 (1977).Google Scholar
  165. 162.
    M. M. Sprung and M. T. Gladstone, J. Am. Chem. Soc. 71, 2907 (1949).Google Scholar
  166. 163.
    L. M. Yeddanapalli and D. J. Francis, Makromol. Chem. 55, 74 (1962).Google Scholar
  167. 164.
    N. Kornblum, R. A. Smily, R. R. Blackwood, and D. C. I1Hand, J. Am. Chem. Soc. 77, 7269 (1955).Google Scholar
  168. 165.
    D. H. Fraser, R. W. Hall, P. A. Jenkins, and A. L. J. Raum, J. Appl. Chem., 689 (1957).Google Scholar
  169. 166.
    H. Kammerer and M. Grossmann, Makromol. Chem. 140, 131 (1970).Google Scholar
  170. 167.
    P. K. Pal, A. Kumar, and S. K. Gupta, Polymer 22, 1699 (1981).Google Scholar
  171. 168.
    P. K. Pal, A. Kumar, and S. K. Gupta, Br. Polym. J. 12, 121 (1980).Google Scholar
  172. 169.
    A. Pizzi, R. M. Horak, D. Ferreira, and D. G. Roux, Cellul. Chem. Technol. 13, 753 (1979).Google Scholar
  173. 170.
    D. du T. Rossouw and A. Pizzi, J. Polym. Sci., Polym. Chem. Ed. 18, 3323 (1980).Google Scholar
  174. 171.
    W. Dankelman and J. de Wit, Angew. Makromol. Chem. 62, 101 (1977).Google Scholar
  175. 172.
    R. Anderson, A. H. Haines, and B. P. Stark, Angew. Makromol. Chem. 26, 171 (1972).Google Scholar
  176. 173.
    G. T. Tiedeman and M. R. Sanclemente, J. Appl. Polym. Sci. 17, 1813–1819 (1973).Google Scholar
  177. 174.
    P. R. Steiner, J. Appl. Polym. Sci. 19, 215 (1975).Google Scholar
  178. 175.
    B. Broecker and H. J. Kiessling (Reichhold Albert Chemie Aktiengesellschaft, Germany), U.S. Patent 3,630, 977 (1971).Google Scholar
  179. 176.
    R. Gudenpfennig (Reichhold Albert Chemie Aktiengesellschaft, Germany), U.S. Patent 3,650, 996 (1972).Google Scholar
  180. 177.
    H. S. Rothrock (E. I. du Pont de Nemours Co.), U.S. Patent 2,079, 633 (1937).Google Scholar
  181. 178.
    U. Sachse, R. Winkler, L. Chroszcz, and R. Hennersdorf, Ger. Patent 122, 390 (1976).Google Scholar
  182. 179.
    H. M. Culbertson (Monsanto Co.), U.S. Patent 4,122, 054 (1978).Google Scholar
  183. 180.
    H. M. Culbertson (Monsanto Co.), U.S. Patent 4,120, 847 (1978).Google Scholar
  184. 181.
    H. M. Culbertson (Monsanto Co.), U.S. Patent 4,157, 324 (1979).Google Scholar
  185. 182.
    A. F. Shepard and B. F. Dannels (Hooker Chem. Corp.), U.S. Patent 3, 409, 571 (1968).Google Scholar
  186. 183.
    R. W. Martin (General Electric Co.), U.S. Patent 2,579, 330 (1951).Google Scholar
  187. 184.
    R. W. Martin (General Electric Co.), U.S. Patent 2,598, 406 (1952).Google Scholar
  188. 185.
    R. W. Martin (General Electric Co.), U.S. Patent 2,606, 029 (1952).Google Scholar
  189. 186.
    R. W. Martin (General Electric Co.), U.S. Patent 2,579, 329 (1951).Google Scholar
  190. 187.
    R. W. Martin (General Electric Co.), U.S. Patent 2,606, 935 (1952).Google Scholar
  191. 188.
    B. F. Dannels and A. F. Shepard, Am. Chem. Soc., Div. Org. Coat. Plast. Chem., Proc. 27 (1), 125 (1967).Google Scholar
  192. 189.
    W. E. Cass (General Electric Co.), U.S. Patent 2,616, 873 (1952).Google Scholar
  193. 190.
    R. J. Prochaska (General Electric Co.), U.S. Patent 3,220, 980 (1965).Google Scholar
  194. 191.
    A. F. Shepard and B. F. Dannels (Hooker Chemicals & Plastics Corp.), U.S. Patent 4,051, 189 (1977).Google Scholar
  195. 192.
    H. V. Euler, E. Adler, and J. O. Cedwall, Ark. Kemi, Mineral. Geol. 15A, 1 (1942).Google Scholar
  196. 193.
    D. H. Blount (Inventor), U.S. Patent 4,032, 511 (1977).Google Scholar
  197. 194.
    K. Hultzsch, Kunststoffe 37, 205 (1947).Google Scholar
  198. 195.
    G. E. Little, J. Appl. Chem., 196 (1962).Google Scholar
  199. 196.
    Z. Katovic, J. AppL Polym. Sci. 11, 85 (1967).Google Scholar
  200. 197.
    W. M. Jackson and R. T. Conley, J. Appt Polym. Sci. 8, 2163 (1964).Google Scholar
  201. 198.
    Z. Katovic, J. Appl. Polym. Sci. 11, 95 (1967).Google Scholar
  202. 199.
    K. Hultzsch, Angew. Chem. A-60 (7/8), 179 (1948).Google Scholar
  203. 200.
    N. von Euler, E. Cider, J. O. Cedwall, and O. Torngren, Ark. Kemi. Min. Geol. 15A (11) (1942).Google Scholar
  204. 201.
    G. Brown and C. A. Murray, Plast. Technol 11, 45 (1965).Google Scholar
  205. 202.
    C. E. Reed and G. D. Favero, Mod. Plast. 40, 102 (1963).Google Scholar
  206. 203.
    D. Braun and J. Arndt, Angew. Makromol Chem. 73, 133 (1978).Google Scholar
  207. 204.
    S. Chow and P. R. Steiner, For. Prod. J. 29 (11), 49 (1979).Google Scholar
  208. 205.
    W. P. Schuman, Jr. and J. Wronki, J. Polym. Eng. Sci., 79 (1966).Google Scholar
  209. 206.
    A. Siegmann and M. Narkis, J. Appl. Polym. Sci. 21, 2311 (1977).Google Scholar
  210. 207.
    S. Chow and P. R. Steiner, J. Appl. Polym. Sci. 23, 1973 (1979).Google Scholar
  211. 208.
    S. Chow, P. R. Steiner, and G. E. Troughton, Wood Sci. 8 (1), 343 (1975).Google Scholar
  212. 209.
    S. Chow, Holzforschung 26 (6), 229 (1972).Google Scholar
  213. 210.
    R. Kosfeld and J. Brandt, Kunststoffe 67 (4), 215 (1977).Google Scholar
  214. 211.
    A. Zinke and E. Ziegler, Bordrite 77, 271 (1944).Google Scholar
  215. 212.
    A. Zinke, J. Appl. Chem., 257 (1951).Google Scholar
  216. 213.
    S. A. Sojka, R. A. Wolfe, and G. D. Guenther, Macromol. Chem. 14, 1539 (1981).Google Scholar
  217. 214.
    Z. Katovic, in: Phenolic Resins: Chemistry and Application, p. 85, Weyerhaeuser Co., Tacoma, WA (1981).Google Scholar
  218. 215.
    H. Horiuchi and A. Fukuda, in: Phenolic Resins: Chemistry and Application, p. 189, Weyerhaeuser Co., Tacoma, WA (1981).Google Scholar
  219. 216.
    R. H. Young, P. W. Kopf, and O. Salgado, TAAPI Conf, 229 (1980);Google Scholar
  220. R. H. Young, P. W. Kopf, and O. Salgado, TAPPI, 64 (4), 127 (1981).Google Scholar
  221. 217.
    R. T. Conley and J. F. Bieron, J. Appl. Polym. Sci. 7, 103, 171 (1963).Google Scholar
  222. 218.
    R. T. Conley, Am. Chem. Soc., Div. Org. Coat. Plast. Chem., Proc. 26 (1), 138 (1966).Google Scholar
  223. 219.
    R. T. Conley, J. Appl. Polym. Sci. 9, 1117 (1965).Google Scholar
  224. 220.
    G. P. Shulman, J. Polym. Sci., Part B, 3, 911 (1965).Google Scholar
  225. 221.
    G. P. Shulman and H. W. Lochte, Am. Chem. Soc., Div. Org. Coat. Plast. Chem., Proc. 26 (1), 149 (1966).Google Scholar
  226. 222.
    H. W. Lochte, E. L. Strauss, and R. T. Conley, J. Appl. Polym. Sci. 9, 2799 (1965).Google Scholar
  227. 223.
    R. T. Johnson, Jr. and R. M. Biefeld, Polym. Eng. Sci. 22, 147 (1982).Google Scholar
  228. 224.
    C. Harwood, G. H. Wostenholm, B. Yates, and D. V. Badami, J. Polym. Sci., Polym. Phys. Ed. 16, 759 (1978).Google Scholar
  229. 225.
    R. W. Warfield and E. G. Kayser, J. Macromol Sci., Phys. B11 (3), 325 (1975).Google Scholar
  230. 226.
    V. A. Era, A. Mattila, and J. J. Lindberg, Angew. Makromol. Chem. 64, 235 (1977).Google Scholar
  231. 227.
    B. Hartmann, J. Appl. Polym. Sci. 19, 3241 (1975).Google Scholar
  232. 228.
    F. L. Tobiason, in: Phenolic Resins: Chemistry and Application, p. 201, Weyerhaeuser Co., Tacoma, WA (1981).Google Scholar
  233. 229.
    F. L. Tobiason, G. H. Cain, and S. M. Gregory, J. Polym. Sci., Polym. Chem. Ed. 16, 659 (1978).Google Scholar
  234. 230.
    F. L. Tobiason, G. H. Cain, and J. W. Anderson, J. Polym. Sci., Polym. Chem. Ed. 16, 275 (1978).Google Scholar
  235. 231.
    J. D. Wellons and L. Gollob, in: Phenolic Resins: Chemistry and Application, p. 121, Weyerhaeuser Co., Tacoma, WA (1981).Google Scholar
  236. 232.
    C. G. Goetzel, High Temp. High Pressures 12, 131 (1980).Google Scholar
  237. 233.
    J. M. Dinwoodie, in: Wood Adhesives Chemistry and Technology, ( A. Pizzi, ed.), Marcel Dekker, New York (1983).Google Scholar
  238. 234.
    F. F. P. Kollmann, E. W. Kuenzi, and A. J. Stamm, Principles of Wood Science and Technology-II, Springer-Verlag, New York (1975).Google Scholar
  239. 235.
    Adhesive Bonding of Wood, U.S. Dept. of Agriculture Tech. Bulletin No. 1512, (1975).Google Scholar
  240. 236.
    B. P. Barth, in: Handbook of Adhesives, ( I. Skeist, ed.), p. 382, Van Nostrand Reinhold Co., New York (1977).Google Scholar
  241. 237.
    R. Ebewele, B. River, and J. Koutsky, Wood Fiber 11 (3), 197 (1979).Google Scholar
  242. 238.
    R. Ebewele, B. H. River, and J. A. Koutsky, Wood Fiber 12 (1), 40 (1980).Google Scholar
  243. 239.
    C. Y. Hse (U.S. Dept. of Agriculture), U.S. Patent 4,209, 433 (1980).Google Scholar
  244. 240.
    C. M. Chen and J. T. Rice, For. Prod. J. 26 (6), 17 (1976).Google Scholar
  245. 241.
    S. Meera, P. Vasuderau, and M. T. Chiplonkar, J. Indian Chem. Soc. 54, 819 (1977).Google Scholar
  246. 242.
    W. E. St. Clair and Roy H. Moult (Koppers Co., Inc.), U.S. Patent 3,133, 034 (1964).Google Scholar
  247. 243.
    G. E. Troughton and R. C. Casilla, For. Prod. J. 33 (5), 38 (1983).Google Scholar
  248. 244.
    A. Pizzi, D. du T. Rossouw, W. E. Knuffel, and M. Singmin, Holzforsch. Holzverwert. 32 (6), 140 (1980).Google Scholar
  249. 245.
    R. O. Ebewele, B. H. River, and J. A. Koutsky, J. Adhes. 14, 189 (1982).Google Scholar
  250. 246.
    G. F. Baxter and R. E. Kreibich, For. Prod. J. 23 (1), 17 (1973).Google Scholar
  251. 247.
    H. G. Freeman, G. F. Baxter, and G. Graham (Weyerhaeuser Co.), U.S. Patent 3,518, 159 (1970).Google Scholar
  252. 248.
    R. E. Kreibich, Adhes. Age 17, 26 (1974).Google Scholar
  253. 249.
    H. G. Freeman (Weyerhaeuser Co.), U.S. Patent 3,706, 619 (1972).Google Scholar
  254. 250.
    J. L. Cotter in: Development in Adhesives-1, (W. C. Wake, ed.) Chapter 1, Applied Science Publishers, London (1977).Google Scholar
  255. 251.
    D. J. Conway, Adhes. Age 11 (5), 30 (1968).Google Scholar
  256. 252.
    E. S. Bober, Adhes. Age 2 (12), 30 (1959).Google Scholar
  257. 253.
    J. Shields, Adhesives Handbook, CRC Press, Cleveland (1970).Google Scholar
  258. 254.
    J. M. Black and R. F. Blomquist, Mod. Plast. 33, 225 (1956).Google Scholar
  259. 255.
    J. M. Black and R. F. Blomquist, Adhes. Age 5 (2), 30 (1962).Google Scholar
  260. J. M. Black and R. F. Blomquist, Adhes. Age 5 (3), 34 (1962).Google Scholar
  261. 256.
    M. J. Bodnar and R. F. Wegman, SAMPE J. 5 (8/9), 51 (1969).Google Scholar
  262. 257.
    J. D. Minford, in: Durability of Structural Adhesives, ( A. J. Kinloch, ed.), p. 135, Applied Science Publishers, New York (1983).Google Scholar
  263. 258.
    J. C. Bolger, in: Adhesion and Adhesives, (R. L. Patrick, ed.), Vol. 3, p. 1, Marcel Dekker, New York (1973).Google Scholar
  264. 259.
    W. Whitney and S. C. Herman, Adhes. Age 3 (1), 22, (1960).Google Scholar
  265. 260.
    L. T. Eby and H. P. Brown, in: Adhesion and Adhesives, (R. L. Patrick, ed.), Vol. 2, p. 77, Marcel Dekker, New York (1969).Google Scholar
  266. 261.
    G. Salomon in: Adhesion and Adhesives, (R. Houwink and G. Salomon, eds.), Vol. 1, p. 1, Elsevier, New York (1965).Google Scholar
  267. 262.
    K. W. Allen and M. E. R. Shanahan, J. Adhes. 7, 161 (1975).Google Scholar
  268. 263.
    D. F. Gould, Phenolic Resins, Reinhold Publishing Corp., New York (1959).Google Scholar
  269. 264.
    A. W. Bethune, SAMPE J. 11 (3) p. 4, (1975).Google Scholar
  270. 265.
    J. C. Bolger and A. S. Michaels in: Interface Conversion for Polymer Coatings (P. Weis and G. D. Chever, eds.), p. 3, Elsevier, New York (1968).Google Scholar
  271. 266.
    N. B. Miller and T. H. Hay in: Structural Adhesives Bonding, (M. J. Bodnar, ed.), p. 123, Interscience Publishers, New York (1966).Google Scholar
  272. 267.
    J. S. Fry (Union Carbide), U.S. Patent 4,125, 544 (1978).Google Scholar
  273. 268.
    Union Carbide Product Bulletin F-47050 (1978), F-47415 (1979).Google Scholar
  274. 269.
    A. F. Thomson (3M Co.), U.S. Patent 2, 610, 910 (1952).Google Scholar
  275. 270.
    J. Keramedjian, Adhes. Age 5 (6), 34 (1962).Google Scholar
  276. 271.
    J. Robins (Ashland Oil & Refin. Co.), U.S. Patent 3,409, 579 (1968).Google Scholar
  277. 272.
    J. Robins (Ashland Oil, Inc.), U.S. Patent 3,676, 392 (1972).Google Scholar
  278. 273.
    J. Graham (3M Company), U.S. Patent 4,048, 103 (1977).Google Scholar

Copyright information

© Plenum Press, New York 1986

Authors and Affiliations

  • Janis Robins
    • 1
  1. 1.Adhesives, Coatings and Sealers Division3MSt. PaulUSA

Personalised recommendations