Advertisement

Wire Wound High Pressure Vessels for Industrial Applications

  • T. Johannisson
  • K. Zander

Abstract

Wire wound high pressure vessels have been used in various industrial applications, the most frequent of these being isostatic pressing and hydrostatic extrusion. Isostatic pressing is generally performed either cold, at room temperature, with liquid as the pressure medium, or hot, at temperatures of 1100 to 1800°C with gas as the pressure medium. In hot isostatic presses the vessel wall is separated from the hot space by insulation, which keeps the vessel wall operating at a low temperature of approximately 50 to 80°C. Cold pressing is used for regular production at pressures up to 600 MPa, hot pressing at pressures up to 200 MPa. Hydrostatic extrusion is generally performed either cold, at room temperature, or warm, at temperatures up to 600°C, in both cases with liquid as the pressure medium. Hydrostatic extrusion is used for regular production at pressures up to 1400 MPa.

Keywords

Fatigue Crack Fatigue Life Fatigue Strength Pressure Medium Regular Production 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Copyright information

© Springer Science+Business Media New York 1979

Authors and Affiliations

  • T. Johannisson
    • 1
  • K. Zander
    • 1
  1. 1.ASEA ABVästeråsSweden

Personalised recommendations