Abstract
Since Kuhn and Katchalsky et al.1 first demonstrated artificial muscle in 1950, various mechanochemical materials have been presented.2 From the view point of mechanical engineering, great hopes are set on these materials as a new actuator, especially in the fields of robotics and medical welfare instruments, and improvements in their performance are eagerly awaited. In such fields realization of light weight, soft touch and powerful actuators is an important subject. We expected that an amphoteric polyvinyl alcohol (PVA) hydrogel might have a potential high enough to realize the mechanical active performance of skeletal muscles.3 Because poly(vinyl alcohol) aqueous solution more than 5%w was found to become strong hydrogel by freezing and thawing by Nanbu in 1982.4- First of our purposes is to examine how much this material can become closer to muscle in the mechanical active properties. Second as a device we have to develope a control technique for mechanical power generation by mechanochemical materials. This paper consists of two sections, first for the improvement of material properties and second for the new method of electrohydrodynamic control.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
W. Kuhn, B. Hargitay, A. Katchalsky, and H. Eisenberg, Reversible Dilatation and Contraction by Changing the State of Ionization of High Polymer Acid Networks, Nature 165(4196): 514 (1950)
Y. Osada, Conversion of Chemical into Mechanical Energy by Synthetic Polymers, in:“Advances in Polymer Science82”, S. Olive and G. Henrici Olive, ed., Springer-Verlag Berlin Heidelberg (1987)
M. Suzuki, T. Tateishi, T. Ushida, and S. Fujishige, An Artificial Muscle of Polyvinyl Alcohol Hydrogel Composites, Biorheology, 23: 274 (1986)
M. Suzuki, Responsive Mechanochemical Actuator Materials by PVA Hydrogel, IUPAC CHEMRAWN VI, The Chemical Society of Japan, IB11 (1987).
M. Suzuki, Expansible Macromolecular Material and Porous Macromolecular Membrane, U.S.Patent, 4717800 (Jan.5,1988),4753761 (Jun.28,1988)
M. Nanbu, High Water Content Rubber, Polymer Appl., 32(11): 523 (1983)
M. Suzuki, Amphoteric poly(vinyl alcohol) Hydrogel as a Material of Artificial Muscle, Kobunsi Ronbunshu, 46(10): 603 (1989).
T. Tanaka, D.Fillmore, S.T.Sun and I.Nishio, Phase Transitions in Ionic gels, Phys.Rev.Lett.,17: 1636 (1980).
D. De Rossi, P. Chiarelli, G. Buzzigoli, C. Domenici and L. Lazzeri, Contractile Behavior of Electrically Activated Mechanochemical Polymer Actuators, Trans.Am.Soc.Artif.Intern.Organs, 32: 157 (1986).
A. J. Grodzinsky and J. R. Melcher, Electromechanical Transduction with Charged Polyelectrolyte Membranes, IEEE Trans.Biomed.Eng., BME-23(6): 421 (1976)
W. F. Pickard, Ion Drag Pumping, J.Appl.Phys.,34: 246 (1963)
M. Suzuki and Y. Sawada, Nonlinear Oscillations of a Polar-Liquid Column under Unipolar-Ion Injection, J.Appl.Phys., 51: 5667 (1980)
M. Suzuki, Propagating Transitions of Electroconvection, Phys. Rev., 31(4): 2548 (1985)
M. Suzuki, Mechanical Energy Generation by Hydrogel, Approaches to Higher Efficiency and higher Controlability, Proc.Int.Workshop on Intell. Materials, The Soc.of Non-traditional Technology, Tokyo, 307 (1989)
S. Fujikawa, Artificial Biological Membrane Ultrastructural Changes Caused by Freezing, Electron Microsc. Rev., 1: 113 (1988)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1991 Plenum Press, New York
About this chapter
Cite this chapter
Suzuki, M. (1991). Amphoteric Polyvinyl Alcohol Hydrogel and Electrohydrodynamic Control Method for Artificial Muscles. In: DeRossi, D., Kajiwara, K., Osada, Y., Yamauchi, A. (eds) Polymer Gels. Springer, Boston, MA. https://doi.org/10.1007/978-1-4684-5892-3_16
Download citation
DOI: https://doi.org/10.1007/978-1-4684-5892-3_16
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4684-5894-7
Online ISBN: 978-1-4684-5892-3
eBook Packages: Springer Book Archive